* [PATCH 2/2] PCM038: add support for MMC
@ 2012-03-16 10:52 Alexander Shiyan
2012-03-17 16:18 ` Sascha Hauer
0 siblings, 1 reply; 3+ messages in thread
From: Alexander Shiyan @ 2012-03-16 10:52 UTC (permalink / raw)
To: barebox
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
arch/arm/boards/pcm038/pcm038.c | 9 +++++++++
1 files changed, 9 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boards/pcm038/pcm038.c b/arch/arm/boards/pcm038/pcm038.c
index 8dd6521..0d925cc 100644
--- a/arch/arm/boards/pcm038/pcm038.c
+++ b/arch/arm/boards/pcm038/pcm038.c
@@ -221,6 +221,13 @@ static int pcm038_devices_init(void)
/* I2C2 */
PC5_PF_I2C2_SDA,
PC6_PF_I2C2_SCL,
+ /* SD1 */
+ PE18_PF_SD1_D0,
+ PE19_PF_SD1_D1,
+ PE20_PF_SD1_D2,
+ PE21_PF_SD1_D3,
+ PE22_PF_SD1_CMD,
+ PE23_PF_SD1_CLK,
};
/* configure 16 bit nor flash on cs0 */
@@ -264,6 +271,8 @@ static int pcm038_devices_init(void)
add_generic_usb_ehci_device(-1, IMX_OTG_BASE + 0x400, NULL);
#endif
+ imx27_add_mmc0(NULL);
+
/* Register the fec device after the PLL re-initialisation
* as the fec depends on the (now higher) ipg clock
*/
--
1.7.3.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH 2/2] PCM038: add support for MMC
2012-03-16 10:52 [PATCH 2/2] PCM038: add support for MMC Alexander Shiyan
@ 2012-03-17 16:18 ` Sascha Hauer
2012-03-18 5:16 ` Re[2]: " Alexander Shiyan
0 siblings, 1 reply; 3+ messages in thread
From: Sascha Hauer @ 2012-03-17 16:18 UTC (permalink / raw)
To: Alexander Shiyan; +Cc: barebox
On Fri, Mar 16, 2012 at 02:52:26PM +0400, Alexander Shiyan wrote:
>
> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Does this work without turning on the mc13783 regulator for MMC?
Sascha
> ---
> arch/arm/boards/pcm038/pcm038.c | 9 +++++++++
> 1 files changed, 9 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boards/pcm038/pcm038.c b/arch/arm/boards/pcm038/pcm038.c
> index 8dd6521..0d925cc 100644
> --- a/arch/arm/boards/pcm038/pcm038.c
> +++ b/arch/arm/boards/pcm038/pcm038.c
> @@ -221,6 +221,13 @@ static int pcm038_devices_init(void)
> /* I2C2 */
> PC5_PF_I2C2_SDA,
> PC6_PF_I2C2_SCL,
> + /* SD1 */
> + PE18_PF_SD1_D0,
> + PE19_PF_SD1_D1,
> + PE20_PF_SD1_D2,
> + PE21_PF_SD1_D3,
> + PE22_PF_SD1_CMD,
> + PE23_PF_SD1_CLK,
> };
>
> /* configure 16 bit nor flash on cs0 */
> @@ -264,6 +271,8 @@ static int pcm038_devices_init(void)
> add_generic_usb_ehci_device(-1, IMX_OTG_BASE + 0x400, NULL);
> #endif
>
> + imx27_add_mmc0(NULL);
> +
> /* Register the fec device after the PLL re-initialisation
> * as the fec depends on the (now higher) ipg clock
> */
> --
> 1.7.3.4
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re[2]: [PATCH 2/2] PCM038: add support for MMC
2012-03-17 16:18 ` Sascha Hauer
@ 2012-03-18 5:16 ` Alexander Shiyan
0 siblings, 0 replies; 3+ messages in thread
From: Alexander Shiyan @ 2012-03-18 5:16 UTC (permalink / raw)
To: Sascha Hauer; +Cc: barebox
Sat, 17 Mar 2012 17:18:22 +0100 от Sascha Hauer <s.hauer@pengutronix.de>:
> On Fri, Mar 16, 2012 at 02:52:26PM +0400, Alexander Shiyan wrote:
> Does this work without turning on the mc13783 regulator for MMC?
Yes, we should turn on VMMC after pmic-power().
The patch isn't finished.
> > arch/arm/boards/pcm038/pcm038.c | 9 +++++++++
> > 1 files changed, 9 insertions(+), 0 deletions(-)
> >
> > diff --git a/arch/arm/boards/pcm038/pcm038.c b/arch/arm/boards/pcm038/pcm038.c
> > index 8dd6521..0d925cc 100644
> > --- a/arch/arm/boards/pcm038/pcm038.c
> > +++ b/arch/arm/boards/pcm038/pcm038.c
> > @@ -221,6 +221,13 @@ static int pcm038_devices_init(void)
> > /* I2C2 */
> > PC5_PF_I2C2_SDA,
> > PC6_PF_I2C2_SCL,
> > + /* SD1 */
> > + PE18_PF_SD1_D0,
> > + PE19_PF_SD1_D1,
> > + PE20_PF_SD1_D2,
> > + PE21_PF_SD1_D3,
> > + PE22_PF_SD1_CMD,
> > + PE23_PF_SD1_CLK,
> > };
> >
> > /* configure 16 bit nor flash on cs0 */
> > @@ -264,6 +271,8 @@ static int pcm038_devices_init(void)
> > add_generic_usb_ehci_device(-1, IMX_OTG_BASE + 0x400, NULL);
> > #endif
> >
> > + imx27_add_mmc0(NULL);
> > +
> > /* Register the fec device after the PLL re-initialisation
> > * as the fec depends on the (now higher) ipg clock
> > */
> > --
> > 1.7.3.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2012-03-18 5:16 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-03-16 10:52 [PATCH 2/2] PCM038: add support for MMC Alexander Shiyan
2012-03-17 16:18 ` Sascha Hauer
2012-03-18 5:16 ` Re[2]: " Alexander Shiyan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox