From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from ip2.televic.com ([81.82.194.222]) by merlin.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1WL8YD-000270-Na for barebox@lists.infradead.org; Wed, 05 Mar 2014 09:55:46 +0000 From: Vanhauwaert Wouter Date: Wed, 5 Mar 2014 10:55:16 +0100 Message-ID: Content-Language: en-US MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: at91sam9260-ek ... To: "barebox@lists.infradead.org" Hello, Is the setup for a at91sam9260-ek still functioning? I have troubles with my nand flash. At first it boots and writes BBT-tables. However, next boot, it won't read the BBT, and has errors with the magic on the environment variables. Erase /dev/env0 and saveenv do not make a difference. Nandtest does not give me errors... I'm just using the latest barebox 2014.2 and loading it on a at91sam9260-ek through usb (sam-ba). I'm just using the plain at91sam9260ek_defconfig My output: First boot: barebox 2014.02.0 #4 Wed Mar 5 10:39:35 CET 2014 Board: Atmel at91sam9260-ek AT91: Detected soc type: at91sam9260 AT91: Detected soc subtype: Unknown Clocks: CPU 198 MHz, master 99 MHz, main 18.432 MHz netconsole: registered as cs1 atmel_nand: Use On Flash BBT nand: NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3 V 8-bit), 256MiB, page size: 2048, OOB size: 64 Bad block table not found for chip 0 Bad block table not found for chip 0 Scanning device for bad blocks Bad block table written to 0x00000ffe0000, version 0x01 Bad block table written to 0x00000ffc0000, version 0x01 mdio_bus: miibus0: probed macb macb0: Cadence MACB at 0xfffc4000 at91_udc at91_udc0: at91_udc version 3 May 2006 atmel_mci atmel_mci0: version: 0x210 atmel_mci atmel_mci0: registered as atmel_mci0 atmel_mci atmel_mci0: command/data timeout atmel_mci atmel_mci0: command/data timeout atmel_mci atmel_mci0: command/data timeout malloc space: 0x23b00000 -> 0x23efffff (size 4 MiB) envfs: wrong magic on /dev/env0 no valid environment found on /dev/env0. Using default environment running /env/bin/init... enable tty over USB Device, increase the boot delay to 16s Hit any key to stop autoboot Second boot: barebox 2014.02.0 #4 Wed Mar 5 10:39:35 CET 2014 Board: Atmel at91sam9260-ek AT91: Detected soc type: at91sam9260 AT91: Detected soc subtype: Unknown Clocks: CPU 198 MHz, master 99 MHz, main 18.432 MHz netconsole: registered as cs1 atmel_nand: Use On Flash BBT nand: NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3 V 8-bit), 256MiB, page size: 2048, OOB size: 64 Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 nand_bbt: error reading BBT mdio_bus: miibus0: probed macb macb0: Cadence MACB at 0xfffc4000 at91_udc at91_udc0: at91_udc version 3 May 2006 atmel_mci atmel_mci0: version: 0x210 atmel_mci atmel_mci0: registered as atmel_mci0 atmel_mci atmel_mci0: command/data timeout atmel_mci atmel_mci0: command/data timeout atmel_mci atmel_mci0: command/data timeout malloc space: 0x23b00000 -> 0x23efffff (size 4 MiB) envfs: wrong magic on /dev/env0 no valid environment found on /dev/env0. Using default environment running /env/bin/init... enable tty over USB Device, increase the boot delay to 16s Hit any key to stop autoboot _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox