From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.haslerrail.com ([212.103.73.117]) by bombadil.infradead.org with esmtps (Exim 4.85_2 #1 (Red Hat Linux)) id 1bugDu-0001gz-Hv for barebox@lists.infradead.org; Thu, 13 Oct 2016 13:39:03 +0000 From: Trostel Alain Date: Thu, 13 Oct 2016 13:38:36 +0000 Message-ID: Content-Language: en-US MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: How to configure and enable the barebox state? To: "barebox@lists.infradead.org" Hi, I would like to configure and enable the barebox state. My assumption is that I need to change the following device tree for my Phytec AM335x SOM: arch/arm/dts/am335x-phytec-phycore-som.dts But from the documentation (http://www.barebox.org/doc/latest/devicetree/bindings/barebox/barebox,state.html) it is not clear to me where exactly I need to add the variable node example. Furthermore, I have check that the 'CONFIG_OFDEVICE' is enabled. So, where is the correct place to add the variable node configuration and what needs to be enabled in barebox? Best regards, Alain _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox