* How to run barebox gui on linux, fb or x?
@ 2016-04-30 10:13 DU HUANPENG
2016-04-30 11:19 ` Antony Pavlov
0 siblings, 1 reply; 4+ messages in thread
From: DU HUANPENG @ 2016-04-30 10:13 UTC (permalink / raw)
To: barebox
Hello, I want to test the is the barebox font working
correctly, but I still don't know how to run barebox(sandbox)
on linux fb or x.
any one can help?
thanks very much!
...
duhuanpeng.
u74147＠gmai1.com
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: How to run barebox gui on linux, fb or x?
2016-04-30 10:13 How to run barebox gui on linux, fb or x? DU HUANPENG
@ 2016-04-30 11:19 ` Antony Pavlov
2016-04-30 12:39 ` DU HUANPENG
0 siblings, 1 reply; 4+ messages in thread
From: Antony Pavlov @ 2016-04-30 11:19 UTC (permalink / raw)
To: DU HUANPENG; +Cc: barebox
On Sat, 30 Apr 2016 10:13:28 +0000
DU HUANPENG <no_rep1y@hotmail.com> wrote:
> Hello, I want to test the is the barebox font working
> correctly, but I still don't know how to run barebox(sandbox)
> on linux fb or x.
> any one can help?
Here is barebox-sandbox-sdl howto.
Go to your barebox repo directory and checkout next branch.
Generate .config and enable SDL support:
$ make mrproper
$ make defconfig
$ sed -i "s/# CONFIG_DRIVER_VIDEO_SDL is not set/CONFIG_DRIVER_VIDEO_SDL=y/" .config
Next, compile sandbox barebox and run it:
$ make
$ ./barebox
Inside barebox enable fbconsole0 output:
barebox@barebox sandbox:/ fbconsole0.active=oe
fb0: framebuffer console 80x30 activated
--
Best regards,
Antony Pavlov
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: How to run barebox gui on linux, fb or x?
2016-04-30 11:19 ` Antony Pavlov
@ 2016-04-30 12:39 ` DU HUANPENG
2016-04-30 14:35 ` Antony Pavlov
0 siblings, 1 reply; 4+ messages in thread
From: DU HUANPENG @ 2016-04-30 12:39 UTC (permalink / raw)
To: Antony Pavlov; +Cc: barebox
On Sat, Apr 30, 2016 at 02:19:37PM +0300, Antony Pavlov wrote:
> On Sat, 30 Apr 2016 10:13:28 +0000
> DU HUANPENG <no_rep1y@hotmail.com> wrote:
>
> > Hello, I want to test the is the barebox font working
> > correctly, but I still don't know how to run barebox(sandbox)
> > on linux fb or x.
> > any one can help?
>
> Here is barebox-sandbox-sdl howto.
>
> Go to your barebox repo directory and checkout next branch.
> Generate .config and enable SDL support:
>
> $ make mrproper
> $ make defconfig
> $ sed -i "s/# CONFIG_DRIVER_VIDEO_SDL is not set/CONFIG_DRIVER_VIDEO_SDL=y/" .config
thanks very much!
i got this error msg when compiling:
- - - - - - - - - - - - - - - - - - - -
CC arch/sandbox/os/sdl.o
arch/sandbox/os/sdl.c:8:17: fatal error: SDL.h: No such file or directory
compilation terminated.
scripts/Makefile.build:249: recipe for target 'arch/sandbox/os/sdl.o' failed
make[1]: *** [arch/sandbox/os/sdl.o] Error 1
Makefile:775: recipe for target 'arch/sandbox/os' failed
make: *** [arch/sandbox/os] Error 2
- - - - - - - - - - - - - - - - - - - -
there are many sdl pageages, which one should i install?
>
> Next, compile sandbox barebox and run it:
>
> $ make
> $ ./barebox
>
> Inside barebox enable fbconsole0 output:
>
> barebox@barebox sandbox:/ fbconsole0.active=oe
> fb0: framebuffer console 80x30 activated
>
> --
> Best regards,
> Antony Pavlov
...
duhuanpeng.
u74147＠gmai1.com
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: How to run barebox gui on linux, fb or x?
2016-04-30 12:39 ` DU HUANPENG
@ 2016-04-30 14:35 ` Antony Pavlov
0 siblings, 0 replies; 4+ messages in thread
From: Antony Pavlov @ 2016-04-30 14:35 UTC (permalink / raw)
To: DU HUANPENG; +Cc: barebox
On Sat, 30 Apr 2016 12:39:20 +0000
DU HUANPENG <no_rep1y@hotmail.com> wrote:
> On Sat, Apr 30, 2016 at 02:19:37PM +0300, Antony Pavlov wrote:
> > On Sat, 30 Apr 2016 10:13:28 +0000
> > DU HUANPENG <no_rep1y@hotmail.com> wrote:
> >
> > > Hello, I want to test the is the barebox font working
> > > correctly, but I still don't know how to run barebox(sandbox)
> > > on linux fb or x.
> > > any one can help?
> >
> > Here is barebox-sandbox-sdl howto.
> >
> > Go to your barebox repo directory and checkout next branch.
> > Generate .config and enable SDL support:
> >
> > $ make mrproper
> > $ make defconfig
> > $ sed -i "s/# CONFIG_DRIVER_VIDEO_SDL is not set/CONFIG_DRIVER_VIDEO_SDL=y/" .config
> thanks very much!
> i got this error msg when compiling:
> - - - - - - - - - - - - - - - - - - - -
> CC arch/sandbox/os/sdl.o
> arch/sandbox/os/sdl.c:8:17: fatal error: SDL.h: No such file or directory
> compilation terminated.
> scripts/Makefile.build:249: recipe for target 'arch/sandbox/os/sdl.o' failed
> make[1]: *** [arch/sandbox/os/sdl.o] Error 1
> Makefile:775: recipe for target 'arch/sandbox/os' failed
> make: *** [arch/sandbox/os] Error 2
> - - - - - - - - - - - - - - - - - - - -
> there are many sdl pageages, which one should i install?
>
I use the 'libsdl1.2-dev' Debian package.
--
Best regards,
Antony Pavlov
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-04-30 14:35 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-04-30 10:13 How to run barebox gui on linux, fb or x? DU HUANPENG
2016-04-30 11:19 ` Antony Pavlov
2016-04-30 12:39 ` DU HUANPENG
2016-04-30 14:35 ` Antony Pavlov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox