ok i was able to preceed a little. The
new error message after booting is:
barebox 2012.03.0-dirty (Jul 17 2012
- 11:36:47)
Board: RAFI i.MX53
eth@eth0: got MAC address from EEPROM:
********
NAND device: Manufacturer ID: 0xec,
Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit)
Bad block table found at page 65472,
version 0x01
Bad block table found at page 65408,
version 0x01
nand_read_bbt: Bad block at 0x060a0000
Malloc space: 0x7df00000 -> 0x7fefffff
(size 32 MB)
Stack space : 0x7def8000 -> 0x7df00000
(size 32 kB)
envfs: wrong magic on /dev/env0
running /env/bin/init...
not found
barebox:/
current settings are:
flash_header.c
struct
imx_flash_header_v2 __flash_header_section flash_header =
{
.header.tag
= IVT_HEADER_TAG,
.header.length
= cpu_to_be16(32),
.header.version
= IVT_VERSION,
.entry
= APP_DEST + 0x1000,
.dcd_ptr
= APP_DEST + 0x400 + offsetof(struct
imx_flash_header_v2, dcd),
.boot_data_ptr
= APP_DEST + 0x400 + offsetof(struct
imx_flash_header_v2, boot_data),
.self
= APP_DEST + 0x400,
.boot_data.start
= APP_DEST,
.boot_data.size
= 0x80000,
.dcd.header.tag
= DCD_HEADER_TAG,
.dcd.header.length
= cpu_to_be16(sizeof(struct
imx_dcd) + sizeof(dcd_entry)),
.dcd.header.version
= DCD_VERSION,
.dcd.command.tag
= DCD_COMMAND_WRITE_TAG,
.dcd.command.length
= cpu_to_be16(sizeof(struct
imx_dcd_command) + sizeof(dcd_entry)),
.dcd.command.param
= DCD_COMMAND_WRITE_PARAM,
};
Environment config
nand_parts="512k(barebox)ro,512k(bareboxenv),4M(kernel),120M(root)"
board_init.c
devfs_add_partition("nand0",
0x00000, 0x80000, PARTITION_FIXED, "self0");
devfs_add_partition("nand0",
0x80000, 0x80000, PARTITION_FIXED, "env0");
seems like the enviroment.c->envfs_load()
looks into a wrong memory area.
Is there a Setting i forgot?
- christian
Von:
Marc Reilly <marc@cpdesign.com.au>
An:
barebox@lists.infradead.org,
Kopie:
christian.buettner@rafi.de,
Sascha Hauer <s.hauer@pengutronix.de>
Datum:
17.07.2012 00:34
Betreff:
Re: Antwort:
Re: Antwort: Re: Antwort: Re: barebox image size
Gesendet von:
Marc Reilly
<marc.reilly@gmail.com>
Hi,
> I flashed from 0x0 to 0x7FFFF (image size: 479K).
> I flashed the environment image (image size: 3K) from 0x80000 to 0xFFFFF
Her you write 512k for env
> and changed the config code from barebox/environs/common/config to:
>
> ...
> nand_parts="512k(barebox)ro,768k(bareboxenv),4M(kernel),120M(root)"
And here you say its 786k.
Cheers,
Marc