mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH v2] video: simple-panel: add regulator support
@ 2025-01-26 21:46 Michael Grzeschik
  2025-01-28 10:14 ` Sascha Hauer
  0 siblings, 1 reply; 2+ messages in thread
From: Michael Grzeschik @ 2025-01-26 21:46 UTC (permalink / raw)
  To: barebox

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
---
v1 -> v2: added the missging signed-off-by

 drivers/video/simple-panel.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/video/simple-panel.c b/drivers/video/simple-panel.c
index 7048e2f51b..d4c6874987 100644
--- a/drivers/video/simple-panel.c
+++ b/drivers/video/simple-panel.c
@@ -10,6 +10,7 @@
 #include <linux/err.h>
 #include <of.h>
 #include <fb.h>
+#include <regulator.h>
 #include <gpio.h>
 #include <of_gpio.h>
 #include <video/backlight.h>
@@ -25,6 +26,7 @@ struct simple_panel {
 	struct device_node *backlight_node;
 	struct backlight_device *backlight;
 	struct device_node *ddc_node;
+	struct regulator *power;
 	int enable_delay;
 };
 
@@ -49,6 +51,8 @@ static int simple_panel_enable(struct simple_panel *panel)
 	if (panel->enable_delay)
 		mdelay(panel->enable_delay);
 
+	regulator_enable(panel->power);
+
 	if (panel->backlight) {
 		ret = backlight_set_brightness_default(panel->backlight);
 		if (ret)
@@ -65,6 +69,8 @@ static int simple_panel_disable(struct simple_panel *panel)
 	if (panel->backlight)
 		backlight_set_brightness(panel->backlight, 0);
 
+	regulator_disable(panel->power);
+
 	if (gpio_is_valid(panel->enable_gpio))
 		gpio_direction_output(panel->enable_gpio,
 			!panel->enable_active_high);
@@ -154,6 +160,10 @@ static int simple_panel_probe(struct device *dev)
 
 	panel->backlight_node = of_parse_phandle(node, "backlight", 0);
 
+	panel->power = regulator_get(dev, "power");
+	if (IS_ERR(panel->power))
+		dev_warn(dev, "Cannot find regulator\n");
+
 	ret = vpl_register(&panel->vpl);
 	if (ret)
 		return ret;
-- 
2.39.5




^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [PATCH v2] video: simple-panel: add regulator support
  2025-01-26 21:46 [PATCH v2] video: simple-panel: add regulator support Michael Grzeschik
@ 2025-01-28 10:14 ` Sascha Hauer
  0 siblings, 0 replies; 2+ messages in thread
From: Sascha Hauer @ 2025-01-28 10:14 UTC (permalink / raw)
  To: Michael Grzeschik; +Cc: barebox

On Sun, Jan 26, 2025 at 10:46:14PM +0100, Michael Grzeschik wrote:
> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> ---
> v1 -> v2: added the missging signed-off-by
> 
>  drivers/video/simple-panel.c | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/drivers/video/simple-panel.c b/drivers/video/simple-panel.c
> index 7048e2f51b..d4c6874987 100644
> --- a/drivers/video/simple-panel.c
> +++ b/drivers/video/simple-panel.c
> @@ -10,6 +10,7 @@
>  #include <linux/err.h>
>  #include <of.h>
>  #include <fb.h>
> +#include <regulator.h>
>  #include <gpio.h>
>  #include <of_gpio.h>
>  #include <video/backlight.h>
> @@ -25,6 +26,7 @@ struct simple_panel {
>  	struct device_node *backlight_node;
>  	struct backlight_device *backlight;
>  	struct device_node *ddc_node;
> +	struct regulator *power;
>  	int enable_delay;
>  };
>  
> @@ -49,6 +51,8 @@ static int simple_panel_enable(struct simple_panel *panel)
>  	if (panel->enable_delay)
>  		mdelay(panel->enable_delay);
>  
> +	regulator_enable(panel->power);
> +
>  	if (panel->backlight) {
>  		ret = backlight_set_brightness_default(panel->backlight);
>  		if (ret)
> @@ -65,6 +69,8 @@ static int simple_panel_disable(struct simple_panel *panel)
>  	if (panel->backlight)
>  		backlight_set_brightness(panel->backlight, 0);
>  
> +	regulator_disable(panel->power);
> +
>  	if (gpio_is_valid(panel->enable_gpio))
>  		gpio_direction_output(panel->enable_gpio,
>  			!panel->enable_active_high);
> @@ -154,6 +160,10 @@ static int simple_panel_probe(struct device *dev)
>  
>  	panel->backlight_node = of_parse_phandle(node, "backlight", 0);
>  
> +	panel->power = regulator_get(dev, "power");
> +	if (IS_ERR(panel->power))
> +		dev_warn(dev, "Cannot find regulator\n");

When there's an error you should return it.
regulator_enable()/regulator_disable() do not handle error pointers
gracefully.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2025-01-28 10:15 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2025-01-26 21:46 [PATCH v2] video: simple-panel: add regulator support Michael Grzeschik
2025-01-28 10:14 ` Sascha Hauer

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox