From: Sascha Hauer <s.hauer@pengutronix.de>
To: Alexander Shiyan <eagle.alexander923@gmail.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] clk: rockchip: rk3588: make refclko25m_ethX critical
Date: Mon, 7 Apr 2025 15:30:43 +0200 [thread overview]
Message-ID: <Z_PTgzLra3jphpeu@pengutronix.de> (raw)
In-Reply-To: <20250331123948.337747-1-eagle.alexander923@gmail.com>
On Mon, Mar 31, 2025 at 03:39:48PM +0300, Alexander Shiyan wrote:
> Ethernet phys normally need a 25MHz refclk input. On a lot of boards
> this is done with a dedicated 25MHz crystal. But the rk3588 CRU also
> provides a means for that via the refclko25m_ethX clock outputs that
> can be used for that function.
>
> The mdio bus normally probes devices on the bus at runtime, by reading
> specific phy registers. This requires the phy to be running and thus
> also being supplied by its reference clock.
>
> While there exist the possibility and dt-binding to declare these
> input clocks for each phy in the phy-dt-node, this is only relevant
> _after_ the phy has been detected and during the drivers probe-run.
>
> This results in a chicken-and-egg-problem. The refclks in the CRU are
> running on boot of course, but phy-probing can very well happen after
> clk_disable_unused has run.
>
> In the past I tried to make clock-handling part of the mdio bus code [0]
> but that wasn't very well received, due to it being specific to OF and
> clocks with the consensus being that resources needed for detection
> need to be enabled before.
>
> So to make probing ethernet phys using the internal refclks possible,
> make those 2 clocks critical.
Quite an unfortunate situation. I must say that I don't really like this
patch as it's only helps to solve this on RK3588 and additionally this
change is easily lost when we update the clock drivers from Linux.
I don't see an easy solution for this issue, so I applied this patch for
now. Nevertheless it would be great to solve that generically in the
long run.
Sascha
>
> [0] https://lore.kernel.org/netdev/13590315.F0gNSz5aLb@diego/T/
>
> Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com>
> ---
> drivers/clk/rockchip/clk-rk3588.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/clk/rockchip/clk-rk3588.c b/drivers/clk/rockchip/clk-rk3588.c
> index 736ce4a543..f6d16ed0cf 100644
> --- a/drivers/clk/rockchip/clk-rk3588.c
> +++ b/drivers/clk/rockchip/clk-rk3588.c
> @@ -794,10 +794,10 @@ static struct rockchip_clk_branch rk3588_clk_branches[] __initdata = {
> COMPOSITE(MCLK_GMAC0_OUT, "mclk_gmac0_out", gpll_cpll_p, 0,
> RK3588_CLKSEL_CON(15), 7, 1, MFLAGS, 0, 7, DFLAGS,
> RK3588_CLKGATE_CON(5), 3, GFLAGS),
> - COMPOSITE(REFCLKO25M_ETH0_OUT, "refclko25m_eth0_out", gpll_cpll_p, 0,
> + COMPOSITE(REFCLKO25M_ETH0_OUT, "refclko25m_eth0_out", gpll_cpll_p, CLK_IS_CRITICAL,
> RK3588_CLKSEL_CON(15), 15, 1, MFLAGS, 8, 7, DFLAGS,
> RK3588_CLKGATE_CON(5), 4, GFLAGS),
> - COMPOSITE(REFCLKO25M_ETH1_OUT, "refclko25m_eth1_out", gpll_cpll_p, 0,
> + COMPOSITE(REFCLKO25M_ETH1_OUT, "refclko25m_eth1_out", gpll_cpll_p, CLK_IS_CRITICAL,
> RK3588_CLKSEL_CON(16), 7, 1, MFLAGS, 0, 7, DFLAGS,
> RK3588_CLKGATE_CON(5), 5, GFLAGS),
> COMPOSITE(CLK_CIFOUT_OUT, "clk_cifout_out", gpll_cpll_24m_spll_p, 0,
> --
> 2.38.2
>
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2025-04-07 13:46 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-31 12:39 Alexander Shiyan
2025-04-07 13:20 ` Sascha Hauer
2025-04-07 13:30 ` Sascha Hauer [this message]
2025-04-07 13:57 ` Alexander Shiyan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Z_PTgzLra3jphpeu@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=eagle.alexander923@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox