* v2017.07.0
@ 2017-06-30 11:52 Sascha Hauer
2017-07-05 3:50 ` v2017.07.0 Antony Pavlov
0 siblings, 1 reply; 3+ messages in thread
From: Sascha Hauer @ 2017-06-30 11:52 UTC (permalink / raw)
To: Barebox List; +Cc: lst
Hi All,
I just releaed barebox-2017.07.0. The reason for this early release is
that I am away for the next two months. During this time Lucas will take
over maintainership and also make the next release.
Most notable new feature this time I think is the support for links to
directories. Until now only links to files were supported. Links to
directories help for example on the Omap port where we used to mount
the partition the ROM boots from to /boot. With links to directories we
can now mount the partition to its standard location in /mnt/... while
still maintaining the /boot/ directory several Omap boot scripts depend
on. I am sure links to directories will prove useful on other occasions
aswell.
See below for a detailed list of changes that went into this release.
Sascha
----------------------------------------------------------------
Aleksander Morgado (2):
ratp: avoid using already freed memory
sandbox: new --stdinout option to enable a bidirectional console
Alexander Kurz (4):
ARM: i.MX6 Wandboard: dont do MMDC Write Leveling Calibration
ARM: i.MX6 Wandboard Quad: fix PBL UART MUX
ARM: i.MX6 Wandboard: enable Wandboard Quad
ARM: i.MX6 Wandboard: add Documentation
Andrey Panov (2):
of: Search for /memory node by type, if it is not found by name
ARM: Embedsky E9: Update environment
Andrey Smirnov (7):
gpio-imx: Do not use gpio_set_value()
gpiolib: Add code to support "active low" GPIOs
gpiolib: Add support for GPIO "hog" nodes
usb-nop-xceiv: Add support for 'reset-gpios' binding
clk-vf610: Mark all of CCSR muxes with CLK_OPS_PARENT_ENABLE
i.MX: clk-pllv3: Do not touch PLL_BYPASS bit
i.MX: clk: Remove imx_clk_pllv3_locked()
Antony Pavlov (7):
MIPS: start*.S: drop redundant .text
MIPS: barebox.lds.S: drop unneeded '_start = .'
MIPS: barebox.lds.S: remove unused got
MIPS: barebox.lds.S: put .text_entry contents after _stext and _text
MIPS: start.S: put entry code into the ".text_entry" section
rtc-lib: drop unused rtc_ydays
i2c: mv64xxx: fix indentation
Bastian Stender (1):
firmware: altera-serial: add support for Arria 10
Christian Hemp (1):
imx-bbu-nand-fcb: add support for imx6ull
Daniel Schultz (2):
arm: mach-omap: Change mountpoint of boot partitions
fs: Makefile: Add parseopt to all builds
Ian Abbott (7):
commands: add ':' as alias for 'true'
commands: allow <cmd>_aliases[] to be const
hush: make source_aliases[] const
edit: make edit_aliases[] const
help: make help_aliases[] const
test: make test_aliases[] const
true: make true_aliases[] const
Juergen Borleis (1):
i.MX/WD: setup the watchdog according to its datasheet
Lucas Stach (3):
ARM: imx6: gw54xx: add function to retrieve board revision from GSC
ARM: imx6: gw54xx: fixup watchdog nodes on pre rev E boards
ARM: imx6: gw54xx: use wdog1 for barebox
Marc Kleine-Budde (1):
ARM: i.MX: HAB: update documentation of command sequence files (CSF)
Michael Grzeschik (7):
i.MX: fec: also enable optional clocks
ARM: phytec-som-imx6: the ethernet clocks get enabled by fec_imx
ARM: mx6sx-sabresdb: the ethernet clocks get enabled by fec_imx
ARM: i.MX: setup ENET_TX_CLK_DIR in imx6_init for every imx6ul
ARM: phytec-som-imx6: remove needles enet refclk setup
i.MX: fec: add post PHY reset delay DT property
ARM: i.MX6: add Technexion Pico Hobbit support
Michael Tretter (1):
ARM: dts: i.MX6: fix usdhc3 pinmuxing on tqma6x
Oleksij Rempel (3):
Documentation: usbgadget: provide autostart notes
commands: usbgadget: update fastboot help text
Documentation: provide documentation for RNG interfaces.
Philipp Zabel (5):
cdev: make file operations const
commands: mount: combine dev and devstr, which are the same
fs: add parseopt_b for loop mount option
fs: add cdev_create_loop and cdev_remove_loop for loop mount option
commands: mount: mention file loop mounts in the help text
Roland Hieber (1):
Documentation: improve network boot section
Sascha Hauer (32):
fs: Create automount entries for the default mount pathes
state: remove unused variables
errno: Include string for ELOOP
fs: drop path_check_prereq()
fs: Implement links to directories
ls: Fix showing links to directories
fixup! fs: Implement links to directories
state: do not complain about missing backend-storage-type
state: Add working example dtsi file
dts: update to v4.12-rc1
dts: update to v4.12-rc2
dts: update to v4.12-rc3
dts: update to v4.12-rc4
Revert "globalvar: Fix value of new globalvar when nvvar exists"
Revert "nv: Fix setting of nv.dev.<devname>.<param> variables"
Revert "globalvar: make nv_device static"
Revert "globalvar: don't use nv_device if CONFIG_NVVAR is disabled"
Revert "param: remove unnecessary device_d * argument"
Revert "globalvar: make globalvar functions more consistent"
Revert "globalvar: remove code for unqualified globalvars"
Revert "nv: Do not create globalvars from nvvars"
Merge branch 'for-next/arm'
Merge branch 'for-next/directory-links'
Merge branch 'for-next/dts'
Merge branch 'for-next/gpio'
Merge branch 'for-next/imx'
Merge branch 'for-next/mips'
Merge branch 'for-next/misc'
Merge branch 'for-next/misd'
Merge branch 'for-next/state'
pinctrl: at91: Bail out if atmel,pins property does not exist
Release v2017.07.0
Stefan Riedmueller (3):
ARM: i.MX: Add i.MX6 ULL support
ARM: i.MX6ul: Add Clock support for i.MX6ull
ARCH: ARM: Add support for phytec-phycore-imx6ull
Uwe Kleine-König (5):
new make helper to decode binaries using base64
docs: mvebu can do 2nd stage booting
docs: move kwboot description to generic mvebu section
ARM: mvebu: fix size mask for RAM window
pci: mvebu: terminate error message with a newline
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: v2017.07.0
2017-06-30 11:52 v2017.07.0 Sascha Hauer
@ 2017-07-05 3:50 ` Antony Pavlov
2017-07-05 10:30 ` v2017.07.0 Ian Abbott
0 siblings, 1 reply; 3+ messages in thread
From: Antony Pavlov @ 2017-07-05 3:50 UTC (permalink / raw)
To: Sascha Hauer, Lucas Stach; +Cc: Barebox List, lst
On Fri, 30 Jun 2017 13:52:01 +0200
Sascha Hauer <s.hauer@pengutronix.de> wrote:
> Hi All,
>
> I just releaed barebox-2017.07.0. The reason for this early release is
> that I am away for the next two months. During this time Lucas will take
> over maintainership and also make the next release.
>
> Most notable new feature this time I think is the support for links to
> directories.
Hi!
It looks like the commit
commit a602bebcf7e42eb8933f224c12cad1c9320e28a1
Author: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue May 9 07:38:48 2017 +0200
fs: Implement links to directories
breaks tftp command: the command can't anymore download file from subdirectory,
e.g.
barebox:/ tftp antony/zbarebox
could not open /.tftp_tmp_path/antony/zbarebox: Invalid argument
barebox:/ tftp zbarebox
[#################################################################]
barebox:/
Reverting 944bf0e1 ('fixup! fs: Implement links to directories') and
a602bebc ('fs: Implement links to directories') fixes the problem.
--
Best regards,
Antony Pavlov
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: v2017.07.0
2017-07-05 3:50 ` v2017.07.0 Antony Pavlov
@ 2017-07-05 10:30 ` Ian Abbott
0 siblings, 0 replies; 3+ messages in thread
From: Ian Abbott @ 2017-07-05 10:30 UTC (permalink / raw)
To: Antony Pavlov, Sascha Hauer, Lucas Stach; +Cc: Barebox List, lst
On 05/07/17 04:50, Antony Pavlov wrote:
> On Fri, 30 Jun 2017 13:52:01 +0200
> Sascha Hauer <s.hauer@pengutronix.de> wrote:
>
>> Hi All,
>>
>> I just releaed barebox-2017.07.0. The reason for this early release is
>> that I am away for the next two months. During this time Lucas will take
>> over maintainership and also make the next release.
>>
>> Most notable new feature this time I think is the support for links to
>> directories.
>
> Hi!
>
> It looks like the commit
>
> commit a602bebcf7e42eb8933f224c12cad1c9320e28a1
> Author: Sascha Hauer <s.hauer@pengutronix.de>
> Date: Tue May 9 07:38:48 2017 +0200
>
> fs: Implement links to directories
>
> breaks tftp command: the command can't anymore download file from subdirectory,
> e.g.
>
> barebox:/ tftp antony/zbarebox
> could not open /.tftp_tmp_path/antony/zbarebox: Invalid argument
>
> barebox:/ tftp zbarebox
> [#################################################################]
> barebox:/
>
> Reverting 944bf0e1 ('fixup! fs: Implement links to directories') and
> a602bebc ('fs: Implement links to directories') fixes the problem.
>
I just tried to reproduce it since the patch had caused me other
problems, but I couldn't reproduce it on my custom board:
barebox@Belltech dbPod SoCFPGA Fast:/ version
barebox 2017.07.0 #2 Wed Jul 5 10:46:41 BST 2017
barebox@Belltech dbPod SoCFPGA Fast:/ tftp antony/zbarebox
[#################################################################]
barebox@Belltech dbPod SoCFPGA Fast:/
I don't think it should matter, but for reference, I'm using atftpd as
my TFTP server.
--
-=( Ian Abbott @ MEV Ltd. E-mail: <abbotti@mev.co.uk> )=-
-=( Web: http://www.mev.co.uk/ )=-
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2017-07-05 10:31 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-06-30 11:52 v2017.07.0 Sascha Hauer
2017-07-05 3:50 ` v2017.07.0 Antony Pavlov
2017-07-05 10:30 ` v2017.07.0 Ian Abbott
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox