From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: Sascha Hauer <s.hauer@pengutronix.de>,
BAREBOX <barebox@lists.infradead.org>
Cc: "Claude Sonnet 4.5" <noreply@anthropic.com>
Subject: Re: [PATCH 08/19] Makefile: add barebox.elf build target
Date: Mon, 5 Jan 2026 13:22:40 +0100 [thread overview]
Message-ID: <b86f471c-0813-49d8-a46b-6df823cd6d67@pengutronix.de> (raw)
In-Reply-To: <20260105-pbl-load-elf-v1-8-e97853f98232@pengutronix.de>
Hi,
On 1/5/26 12:26 PM, Sascha Hauer wrote:
> Add a build target to create barebox.elf, which provides an ELF format
> version of barebox that can be used for debugging or alternative boot
> scenarios.
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
I think conceptually, the Co-Authored-By should be before your S-o-b.
> ---
> Makefile | 16 +++++++++++++++-
> 1 file changed, 15 insertions(+), 1 deletion(-)
>
> diff --git a/Makefile b/Makefile
> index 75e14383bcdcf987d091442adba9b053af28eae7..c1aa6935abe5c65156b812d4a0b21c6d488038ae 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -850,6 +850,9 @@ all: barebox-flash-images
> endif
>
> all: $(symlink-y)
> +ifeq ($(CONFIG_PBL_IMAGE)-$(CONFIG_PBL_IMAGE_NO_PIGGY),y-)
> +all: barebox.elf
> +endif
Why not:
ifdef CONFIG_PBL_IMAGE_ELF
export BAREBOX_PROPER ?= vmbarebox # or barebox.elf
else
export BAREBOX_PROPER ?= barebox.bin
endif
>
> .SECONDEXPANSION:
> $(symlink-y): $$(or $$(SYMLINK_DEP_$$(@F)),$$(SYMLINK_TARGET_$$(@F))) FORCE
> @@ -1091,6 +1094,17 @@ barebox.fit: images/barebox-$(CONFIG_ARCH_LINUX_NAME).fit
> barebox.srec: barebox
> $(OBJCOPY) -O srec $< $@
>
> +OBJCOPYFLAGS_barebox.elf = --strip-debug --strip-unneeded \
--strip-section-headers goes the farthest I think.
> + --remove-section=.comment \
> + --remove-section=.note \
--remote-section=.note*
> + --remove-section=.note.gnu.build-id
--remove-section=.gnu.hash?
> +
> +quiet_cmd_objcopy_elf = OBJCOPY $@
> + cmd_objcopy_elf = $(OBJCOPY) $(OBJCOPYFLAGS_barebox.elf) $< $@
> +
> +barebox.elf: barebox FORCE
> + $(call if_changed,objcopy_elf)
There is already cmd_objcopy. You should be able to reuse it with
OBJCOPYFLAGS_$@ = $your_options.
Sidenote: We should add --error-rwx-segments depending on
CONFIG_PBL_IMAGE_ELF.
Cheers,
Ahmad
> +
> quiet_cmd_barebox_proper__ = CC $@
> cmd_barebox_proper__ = $(CC) -r -o $@ -Wl,--whole-archive $(BAREBOX_OBJS)
>
> @@ -1388,7 +1402,7 @@ CLEAN_FILES += barebox System.map include/generated/barebox_default_env.h \
> .tmp_version .tmp_barebox* barebox.bin barebox.map \
> .tmp_kallsyms* barebox.ldr compile_commands.json \
> .tmp_barebox.o barebox.o barebox-flash-image \
> - barebox.srec barebox.s5p barebox.ubl \
> + barebox.srec barebox.elf barebox.s5p barebox.ubl \
> barebox.uimage \
> barebox.efi barebox.canon-a1100.bin
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2026-01-05 12:23 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-05 11:26 [PATCH 00/19] PBL: Add PBL ELF loading support with dynamic relocations Sascha Hauer
2026-01-05 11:26 ` [PATCH 01/19] elf: Use memcmp to make suitable for PBL Sascha Hauer
2026-01-05 11:46 ` Ahmad Fatoum
2026-01-05 11:26 ` [PATCH 02/19] elf: build for PBL as well Sascha Hauer
2026-01-05 11:26 ` [PATCH 03/19] elf: add dynamic relocation support Sascha Hauer
2026-01-05 14:05 ` Ahmad Fatoum
2026-01-05 11:26 ` [PATCH 04/19] ARM: implement elf_apply_relocations() for ELF " Sascha Hauer
2026-01-05 11:58 ` Ahmad Fatoum
2026-01-05 19:53 ` Sascha Hauer
2026-01-05 11:26 ` [PATCH 05/19] riscv: " Sascha Hauer
2026-01-05 11:26 ` [PATCH 06/19] elf: implement elf_load_inplace() Sascha Hauer
2026-01-05 13:37 ` Ahmad Fatoum
2026-01-05 22:42 ` Sascha Hauer
2026-01-06 8:18 ` Ahmad Fatoum
2026-01-05 11:26 ` [PATCH 07/19] elf: create elf_open_binary_into() Sascha Hauer
2026-01-05 11:26 ` [PATCH 08/19] Makefile: add barebox.elf build target Sascha Hauer
2026-01-05 12:22 ` Ahmad Fatoum [this message]
2026-01-05 15:43 ` Sascha Hauer
2026-01-05 17:11 ` Ahmad Fatoum
2026-01-05 11:26 ` [PATCH 09/19] PBL: allow to link ELF image into PBL Sascha Hauer
2026-01-05 12:11 ` Ahmad Fatoum
2026-01-05 11:26 ` [PATCH 10/19] mmu: add MAP_CACHED_RO mapping type Sascha Hauer
2026-01-05 12:14 ` Ahmad Fatoum
2026-01-05 11:26 ` [PATCH 11/19] mmu: introduce pbl_remap_range() Sascha Hauer
2026-01-05 12:15 ` Ahmad Fatoum
2026-01-06 8:50 ` Ahmad Fatoum
2026-01-06 9:25 ` Sascha Hauer
2026-01-05 11:26 ` [PATCH 12/19] ARM: use relative jumps in exception table Sascha Hauer
2026-01-05 11:44 ` Ahmad Fatoum
2026-01-05 12:29 ` Sascha Hauer
2026-01-05 12:31 ` Ahmad Fatoum
2026-01-05 11:26 ` [PATCH 13/19] ARM: exceptions: make in-binary exception table const Sascha Hauer
2026-01-05 11:26 ` [PATCH 14/19] ARM: linker script: create separate PT_LOAD segments for text, rodata, and data Sascha Hauer
2026-01-05 13:11 ` Ahmad Fatoum
2026-01-05 23:01 ` Sascha Hauer
2026-01-06 7:59 ` Ahmad Fatoum
2026-01-05 11:26 ` [PATCH 15/19] ARM: link ELF image into PBL Sascha Hauer
2026-01-05 12:27 ` Ahmad Fatoum
2026-01-05 11:26 ` [PATCH 16/19] ARM: PBL: setup MMU with proper permissions from ELF segments Sascha Hauer
2026-01-05 12:58 ` Ahmad Fatoum
2026-01-05 11:26 ` [PATCH 17/19] riscv: link ELF image into PBL Sascha Hauer
2026-01-05 13:12 ` Ahmad Fatoum
2026-01-05 11:26 ` [PATCH 18/19] riscv: linker script: create separate PT_LOAD segments for text, rodata, and data Sascha Hauer
2026-01-05 13:40 ` Ahmad Fatoum
2026-01-05 11:27 ` [PATCH 19/19] riscv: add ELF segment-based memory protection with MMU Sascha Hauer
2026-01-05 13:58 ` Ahmad Fatoum
2026-01-05 14:08 ` [PATCH 00/19] PBL: Add PBL ELF loading support with dynamic relocations Ahmad Fatoum
2026-01-05 16:47 ` Sascha Hauer
2026-01-06 8:35 ` Ahmad Fatoum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b86f471c-0813-49d8-a46b-6df823cd6d67@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=noreply@anthropic.com \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox