From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: Jules Maselbas <jmaselbas@kalray.eu>,
Barebox List <barebox@lists.infradead.org>
Subject: Re: [PATCH v3 02/14] usb: dwc2: Add host controller driver
Date: Wed, 22 Jul 2020 08:36:25 +0200 [thread overview]
Message-ID: <c6c0ba75-68dc-6977-2c5f-77eabe36a63d@pengutronix.de> (raw)
In-Reply-To: <20200721120600.15114-3-jmaselbas@kalray.eu>
On 7/21/20 2:05 PM, Jules Maselbas wrote:
> The host driver is taken from U-Boot and mix with some part from Linux.
>
> Signed-off-by: Jules Maselbas <jmaselbas@kalray.eu>
> ---
> drivers/usb/Kconfig | 2 +
> drivers/usb/Makefile | 1 +
> drivers/usb/dwc2/Kconfig | 14 +
> drivers/usb/dwc2/Makefile | 1 +
> drivers/usb/dwc2/core.c | 614 +++++++++++++++++++++++++++
> drivers/usb/dwc2/core.h | 514 +++++++++++++++++++++++
> drivers/usb/dwc2/dwc2.c | 90 ++++
> drivers/usb/dwc2/dwc2.h | 37 ++
> drivers/usb/dwc2/host.c | 634 ++++++++++++++++++++++++++++
> drivers/usb/dwc2/regs.h | 848 ++++++++++++++++++++++++++++++++++++++
> drivers/usb/dwc2/rhub.c | 419 +++++++++++++++++++
> 11 files changed, 3174 insertions(+)
> create mode 100644 drivers/usb/dwc2/Kconfig
> create mode 100644 drivers/usb/dwc2/Makefile
> create mode 100644 drivers/usb/dwc2/core.c
> create mode 100644 drivers/usb/dwc2/core.h
> create mode 100644 drivers/usb/dwc2/dwc2.c
> create mode 100644 drivers/usb/dwc2/dwc2.h
> create mode 100644 drivers/usb/dwc2/host.c
> create mode 100644 drivers/usb/dwc2/regs.h
> create mode 100644 drivers/usb/dwc2/rhub.c
>
> diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
> index 99eff1c8d..aab1564ab 100644
> --- a/drivers/usb/Kconfig
> +++ b/drivers/usb/Kconfig
> @@ -9,6 +9,8 @@ if USB_HOST
>
> source "drivers/usb/imx/Kconfig"
>
> +source "drivers/usb/dwc2/Kconfig"
> +
> source "drivers/usb/dwc3/Kconfig"
>
> source "drivers/usb/host/Kconfig"
> diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
> index 64d4bddad..c39ce8bb6 100644
> --- a/drivers/usb/Makefile
> +++ b/drivers/usb/Makefile
> @@ -1,5 +1,6 @@
> obj-$(CONFIG_USB) += core/
> obj-$(CONFIG_USB_IMX_CHIPIDEA) += imx/
> +obj-$(CONFIG_USB_DWC2) += dwc2/
> obj-$(CONFIG_USB_DWC3) += dwc3/
> obj-$(CONFIG_USB_MUSB) += musb/
> obj-$(CONFIG_USB_STORAGE) += storage/
> diff --git a/drivers/usb/dwc2/Kconfig b/drivers/usb/dwc2/Kconfig
> new file mode 100644
> index 000000000..cd24d8cfa
> --- /dev/null
> +++ b/drivers/usb/dwc2/Kconfig
> @@ -0,0 +1,14 @@
> +config USB_DWC2
> + bool
> + depends on USB && HAS_DMA
> + select USB_OTGDEV
> + select OFDEVICE
> + help
> + DesignWare Core USB2 OTG driver.
> +
> +config USB_DWC2_HOST
> + bool "DWC2 Host mode support"
> + depends on USB_HOST
> + select USB_DWC2
> + help
> + Select this when you want to use DWC2 in host mode.
> diff --git a/drivers/usb/dwc2/Makefile b/drivers/usb/dwc2/Makefile
> new file mode 100644
> index 000000000..f513fbec7
> --- /dev/null
> +++ b/drivers/usb/dwc2/Makefile
> @@ -0,0 +1 @@
> +obj-$(CONFIG_USB_DWC2_HOST) += dwc2.o core.o host.o rhub.o
> diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
> new file mode 100644
> index 000000000..0046e955f
> --- /dev/null
> +++ b/drivers/usb/dwc2/core.c
> @@ -0,0 +1,614 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +#include "dwc2.h"
> +
> +void dwc2_set_param_otg_cap(struct dwc2 *dwc2)
> +{
> + u8 val;
> +
> + switch (dwc2->hw_params.op_mode) {
> + case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE:
> + val = DWC2_CAP_PARAM_HNP_SRP_CAPABLE;
> + break;
> + case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE:
> + case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE:
> + case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST:
> + val = DWC2_CAP_PARAM_SRP_ONLY_CAPABLE;
> + break;
> + default:
> + val = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
> + break;
> + }
> +
> + dwc2->params.otg_cap = val;
> +}
> +
> +void dwc2_set_param_phy_type(struct dwc2 *dwc2)
> +{
> + u8 val;
> +
> + switch (dwc2->hw_params.hs_phy_type) {
> + case GHWCFG2_HS_PHY_TYPE_UTMI:
> + case GHWCFG2_HS_PHY_TYPE_UTMI_ULPI:
> + val = DWC2_PHY_TYPE_PARAM_UTMI;
> + break;
> + case GHWCFG2_HS_PHY_TYPE_ULPI:
> + val = DWC2_PHY_TYPE_PARAM_ULPI;
> + break;
> + case GHWCFG2_HS_PHY_TYPE_NOT_SUPPORTED:
> + val = DWC2_PHY_TYPE_PARAM_FS;
> + break;
> + }
> +
> + dwc2->params.phy_type = val;
> +}
> +
> +void dwc2_set_param_speed(struct dwc2 *dwc2)
> +{
> + if (dwc2->params.phy_type == DWC2_PHY_TYPE_PARAM_FS)
> + dwc2->params.speed = DWC2_SPEED_PARAM_FULL;
> + else
> + dwc2->params.speed = DWC2_SPEED_PARAM_HIGH;
> +}
> +
> +void dwc2_set_param_phy_utmi_width(struct dwc2 *dwc2)
> +{
> + int val;
> +
> + val = (dwc2->hw_params.utmi_phy_data_width ==
> + GHWCFG4_UTMI_PHY_DATA_WIDTH_8) ? 8 : 16;
> +
> + dwc2->params.phy_utmi_width = val;
> +}
> +
> +/**
> + * dwc2_set_default_params() - Set all core parameters to their
> + * auto-detected default values.
> + *
> + * @dwc2: Programming view of the DWC2 controller
> + *
> + */
> +void dwc2_set_default_params(struct dwc2 *dwc2)
> +{
> + struct dwc2_hw_params *hw = &dwc2->hw_params;
> + struct dwc2_core_params *p = &dwc2->params;
> + bool dma_capable = !(hw->arch == GHWCFG2_SLAVE_ONLY_ARCH);
> +
> + dwc2_set_param_otg_cap(dwc2);
> + dwc2_set_param_phy_type(dwc2);
> + dwc2_set_param_speed(dwc2);
> + dwc2_set_param_phy_utmi_width(dwc2);
> + p->phy_ulpi_ddr = false;
> + p->phy_ulpi_ext_vbus = false;
> +
> + p->enable_dynamic_fifo = hw->enable_dynamic_fifo;
> + p->en_multiple_tx_fifo = hw->en_multiple_tx_fifo;
> + p->i2c_enable = hw->i2c_enable;
> + p->acg_enable = hw->acg_enable;
> + p->ulpi_fs_ls = false;
> + p->ts_dline = false;
> + p->reload_ctl = (hw->snpsid >= DWC2_CORE_REV_2_92a);
> + p->uframe_sched = true;
> + p->external_id_pin_ctl = false;
> + p->lpm = true;
> + p->lpm_clock_gating = true;
> + p->besl = true;
> + p->hird_threshold_en = true;
> + p->hird_threshold = 4;
> + p->ipg_isoc_en = false;
> + p->max_packet_count = hw->max_packet_count;
> + p->max_transfer_size = hw->max_transfer_size;
> + p->ahbcfg = GAHBCFG_HBSTLEN_INCR << GAHBCFG_HBSTLEN_SHIFT;
> +
> + p->dma = dma_capable;
> + p->dma_desc = false;
> +
> + if (dwc2->dr_mode == USB_DR_MODE_HOST ||
> + dwc2->dr_mode == USB_DR_MODE_OTG) {
> + p->host_support_fs_ls_low_power = false;
> + p->host_ls_low_power_phy_clk = false;
> + p->host_channels = hw->host_channels;
> + p->host_rx_fifo_size = hw->rx_fifo_size;
> + p->host_nperio_tx_fifo_size = hw->host_nperio_tx_fifo_size;
> + p->host_perio_tx_fifo_size = hw->host_perio_tx_fifo_size;
> + }
> +}
> +
> +int dwc2_core_snpsid(struct dwc2 *dwc2)
> +{
> + struct dwc2_hw_params *hw = &dwc2->hw_params;
> +
> + hw->snpsid = dwc2_readl(dwc2, GSNPSID);
> +
> + /*
> + * Attempt to ensure this device is really a DWC2 Controller.
> + * Read and verify the GSNPSID register contents. The value should be
> + * 0x4f54xxxx, 0x5531xxxx or 0x5532xxxx
> + */
> + hw->snpsid = dwc2_readl(dwc2, GSNPSID);
> + if ((hw->snpsid & GSNPSID_ID_MASK) != DWC2_OTG_ID &&
> + (hw->snpsid & GSNPSID_ID_MASK) != DWC2_FS_IOT_ID &&
> + (hw->snpsid & GSNPSID_ID_MASK) != DWC2_HS_IOT_ID) {
> + dwc2_err(dwc2, "Bad value for GSNPSID: 0x%08x\n",
> + hw->snpsid);
> + return -ENODEV;
> + }
> +
> + dwc2_dbg(dwc2, "Core Release: %1x.%1x%1x%1x (snpsid=%x)\n",
> + hw->snpsid >> 12 & 0xf, hw->snpsid >> 8 & 0xf,
> + hw->snpsid >> 4 & 0xf, hw->snpsid & 0xf, hw->snpsid);
> +
> + return 0;
> +}
> +
> +/**
> + * During device initialization, read various hardware configuration
> + * registers and interpret the contents.
> + *
> + * @dwc2: Programming view of the DWC2 controller
> + *
> + */
> +void dwc2_get_hwparams(struct dwc2 *dwc2)
> +{
> + struct dwc2_hw_params *hw = &dwc2->hw_params;
> + unsigned int width;
> + u32 hwcfg1, hwcfg2, hwcfg3, hwcfg4;
> + u32 grxfsiz;
> +
> + hwcfg1 = dwc2_readl(dwc2, GHWCFG1);
> + hwcfg2 = dwc2_readl(dwc2, GHWCFG2);
> + hwcfg3 = dwc2_readl(dwc2, GHWCFG3);
> + hwcfg4 = dwc2_readl(dwc2, GHWCFG4);
> + grxfsiz = dwc2_readl(dwc2, GRXFSIZ);
> +
> + /* hwcfg1 */
> + hw->dev_ep_dirs = hwcfg1;
> +
> + /* hwcfg2 */
> + hw->op_mode = (hwcfg2 & GHWCFG2_OP_MODE_MASK) >>
> + GHWCFG2_OP_MODE_SHIFT;
> + hw->arch = (hwcfg2 & GHWCFG2_ARCHITECTURE_MASK) >>
> + GHWCFG2_ARCHITECTURE_SHIFT;
> + hw->enable_dynamic_fifo = !!(hwcfg2 & GHWCFG2_DYNAMIC_FIFO);
> + hw->host_channels = 1 + ((hwcfg2 & GHWCFG2_NUM_HOST_CHAN_MASK) >>
> + GHWCFG2_NUM_HOST_CHAN_SHIFT);
> + hw->hs_phy_type = (hwcfg2 & GHWCFG2_HS_PHY_TYPE_MASK) >>
> + GHWCFG2_HS_PHY_TYPE_SHIFT;
> + hw->fs_phy_type = (hwcfg2 & GHWCFG2_FS_PHY_TYPE_MASK) >>
> + GHWCFG2_FS_PHY_TYPE_SHIFT;
> + hw->num_dev_ep = (hwcfg2 & GHWCFG2_NUM_DEV_EP_MASK) >>
> + GHWCFG2_NUM_DEV_EP_SHIFT;
> + hw->nperio_tx_q_depth =
> + (hwcfg2 & GHWCFG2_NONPERIO_TX_Q_DEPTH_MASK) >>
> + GHWCFG2_NONPERIO_TX_Q_DEPTH_SHIFT << 1;
> + hw->host_perio_tx_q_depth =
> + (hwcfg2 & GHWCFG2_HOST_PERIO_TX_Q_DEPTH_MASK) >>
> + GHWCFG2_HOST_PERIO_TX_Q_DEPTH_SHIFT << 1;
> + hw->dev_token_q_depth =
> + (hwcfg2 & GHWCFG2_DEV_TOKEN_Q_DEPTH_MASK) >>
> + GHWCFG2_DEV_TOKEN_Q_DEPTH_SHIFT;
> +
> + /* hwcfg3 */
> + width = (hwcfg3 & GHWCFG3_XFER_SIZE_CNTR_WIDTH_MASK) >>
> + GHWCFG3_XFER_SIZE_CNTR_WIDTH_SHIFT;
> + hw->max_transfer_size = (1 << (width + 11)) - 1;
> + width = (hwcfg3 & GHWCFG3_PACKET_SIZE_CNTR_WIDTH_MASK) >>
> + GHWCFG3_PACKET_SIZE_CNTR_WIDTH_SHIFT;
> + hw->max_packet_count = (1 << (width + 4)) - 1;
> + hw->i2c_enable = !!(hwcfg3 & GHWCFG3_I2C);
> + hw->total_fifo_size = (hwcfg3 & GHWCFG3_DFIFO_DEPTH_MASK) >>
> + GHWCFG3_DFIFO_DEPTH_SHIFT;
> + hw->lpm_mode = !!(hwcfg3 & GHWCFG3_OTG_LPM_EN);
> +
> + /* hwcfg4 */
> + hw->en_multiple_tx_fifo = !!(hwcfg4 & GHWCFG4_DED_FIFO_EN);
> + hw->num_dev_perio_in_ep = (hwcfg4 & GHWCFG4_NUM_DEV_PERIO_IN_EP_MASK) >>
> + GHWCFG4_NUM_DEV_PERIO_IN_EP_SHIFT;
> + hw->num_dev_in_eps = (hwcfg4 & GHWCFG4_NUM_IN_EPS_MASK) >>
> + GHWCFG4_NUM_IN_EPS_SHIFT;
> + hw->dma_desc_enable = !!(hwcfg4 & GHWCFG4_DESC_DMA);
> + hw->power_optimized = !!(hwcfg4 & GHWCFG4_POWER_OPTIMIZ);
> + hw->hibernation = !!(hwcfg4 & GHWCFG4_HIBER);
> + hw->utmi_phy_data_width = (hwcfg4 & GHWCFG4_UTMI_PHY_DATA_WIDTH_MASK) >>
> + GHWCFG4_UTMI_PHY_DATA_WIDTH_SHIFT;
> + hw->acg_enable = !!(hwcfg4 & GHWCFG4_ACG_SUPPORTED);
> + hw->ipg_isoc_en = !!(hwcfg4 & GHWCFG4_IPG_ISOC_SUPPORTED);
> +
> + /* fifo sizes */
> + hw->rx_fifo_size = (grxfsiz & GRXFSIZ_DEPTH_MASK) >>
> + GRXFSIZ_DEPTH_SHIFT;
> +}
> +
> +/*
> + * Initializes the FSLSPClkSel field of the HCFG register depending on the
> + * PHY type
> + */
> +void dwc2_init_fs_ls_pclk_sel(struct dwc2 *dwc2)
> +{
> + u32 hcfg, val;
> +
> + if ((dwc2->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI &&
> + dwc2->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED &&
> + dwc2->params.ulpi_fs_ls) ||
> + dwc2->params.phy_type == DWC2_PHY_TYPE_PARAM_FS) {
> + /* Full speed PHY */
> + val = HCFG_FSLSPCLKSEL_48_MHZ;
> + } else {
> + /* High speed PHY running at full speed or high speed */
> + val = HCFG_FSLSPCLKSEL_30_60_MHZ;
> + }
> +
> + dwc2_dbg(dwc2, "Initializing HCFG.FSLSPClkSel to %08x\n", val);
> + hcfg = dwc2_readl(dwc2, HCFG);
> + hcfg &= ~HCFG_FSLSPCLKSEL_MASK;
> + hcfg |= val << HCFG_FSLSPCLKSEL_SHIFT;
> + dwc2_writel(dwc2, hcfg, HCFG);
> +}
> +
> +void dwc2_flush_all_fifo(struct dwc2 *dwc2)
> +{
> + uint32_t greset;
> +
> + /* Wait for AHB master IDLE state */
> + if (dwc2_wait_bit_set(dwc2, GRSTCTL, GRSTCTL_AHBIDLE, 10000)) {
> + dwc2_warn(dwc2, "%s: Timeout waiting for AHB Idle\n", __func__);
> + return;
> + }
> +
> + greset = GRSTCTL_TXFFLSH | GRSTCTL_RXFFLSH;
> + /* TXFNUM of 0x10 is to flush all TX FIFO */
> + dwc2_writel(dwc2, greset | GRSTCTL_TXFNUM(0x10), GRSTCTL);
> +
> + /* Wait for TxFIFO and RxFIFO flush done */
> + if (dwc2_wait_bit_clear(dwc2, GRSTCTL, greset, 10000))
> + dwc2_warn(dwc2, "Timeout flushing fifos (GRSTCTL=%08x)\n",
> + dwc2_readl(dwc2, GRSTCTL));
> +
> + /* Wait for 3 PHY Clocks */
> + udelay(1);
> +}
> +
> +static int dwc2_fs_phy_init(struct dwc2 *dwc2, bool select_phy)
> +{
> + u32 usbcfg, ggpio, i2cctl;
> + int retval = 0;
> +
> + /*
> + * core_init() is now called on every switch so only call the
> + * following for the first time through
> + */
> + if (select_phy) {
> + dwc2_dbg(dwc2, "FS PHY selected\n");
> +
> + usbcfg = dwc2_readl(dwc2, GUSBCFG);
> + if (!(usbcfg & GUSBCFG_PHYSEL)) {
> + usbcfg |= GUSBCFG_PHYSEL;
> + dwc2_writel(dwc2, usbcfg, GUSBCFG);
> +
> + /* Reset after a PHY select */
> + retval = dwc2_core_reset(dwc2);
> +
> + if (retval) {
> + dwc2_err(dwc2,
> + "%s: Reset failed, aborting", __func__);
> + return retval;
> + }
> + }
> +
> + if (dwc2->params.activate_stm_fs_transceiver) {
> + ggpio = dwc2_readl(dwc2, GGPIO);
> + if (!(ggpio & GGPIO_STM32_OTG_GCCFG_PWRDWN)) {
> + dwc2_dbg(dwc2, "Activating transceiver\n");
> + /*
> + * STM32F4x9 uses the GGPIO register as general
> + * core configuration register.
> + */
> + ggpio |= GGPIO_STM32_OTG_GCCFG_PWRDWN;
> + dwc2_writel(dwc2, ggpio, GGPIO);
> + }
> + }
> + }
> +
> + if (dwc2->params.i2c_enable) {
> + dwc2_dbg(dwc2, "FS PHY enabling I2C\n");
> +
> + /* Program GUSBCFG.OtgUtmiFsSel to I2C */
> + usbcfg = dwc2_readl(dwc2, GUSBCFG);
> + usbcfg |= GUSBCFG_OTG_UTMI_FS_SEL;
> + dwc2_writel(dwc2, usbcfg, GUSBCFG);
> +
> + /* Program GI2CCTL.I2CEn */
> + i2cctl = dwc2_readl(dwc2, GI2CCTL);
> + i2cctl &= ~GI2CCTL_I2CDEVADDR_MASK;
> + i2cctl |= 1 << GI2CCTL_I2CDEVADDR_SHIFT;
> + i2cctl &= ~GI2CCTL_I2CEN;
> + dwc2_writel(dwc2, i2cctl, GI2CCTL);
> + i2cctl |= GI2CCTL_I2CEN;
> + dwc2_writel(dwc2, i2cctl, GI2CCTL);
> + }
> +
> + return retval;
> +}
> +
> +static int dwc2_hs_phy_init(struct dwc2 *dwc2, bool select_phy)
> +{
> + u32 usbcfg, usbcfg_old;
> + int retval = 0;
> +
> + if (!select_phy)
> + return 0;
> +
> + usbcfg = dwc2_readl(dwc2, GUSBCFG);
> + usbcfg_old = usbcfg;
> +
> + /*
> + * HS PHY parameters. These parameters are preserved during soft reset
> + * so only program the first time. Do a soft reset immediately after
> + * setting phyif.
> + */
> + switch (dwc2->params.phy_type) {
> + case DWC2_PHY_TYPE_PARAM_ULPI:
> + /* ULPI interface */
> + dwc2_dbg(dwc2, "HS ULPI PHY selected\n");
> + usbcfg |= GUSBCFG_ULPI_UTMI_SEL;
> + usbcfg &= ~(GUSBCFG_PHYIF16 | GUSBCFG_DDRSEL | GUSBCFG_PHYSEL);
> + if (dwc2->params.phy_ulpi_ddr)
> + usbcfg |= GUSBCFG_DDRSEL;
> +
> + /* Set external VBUS indicator as needed. */
> + if (dwc2->params.phy_ulpi_ext_vbus_ind) {
> + dwc2_dbg(dwc2, "Use external VBUS indicator\n");
> + usbcfg |= GUSBCFG_ULPI_EXT_VBUS_IND;
> + usbcfg &= ~GUSBCFG_INDICATORCOMPLEMENT;
> + usbcfg &= ~GUSBCFG_INDICATORPASSTHROUGH;
> +
> + if (dwc2->params.phy_ulpi_ext_vbus_ind_complement)
> + usbcfg |= GUSBCFG_INDICATORCOMPLEMENT;
> + if (dwc2->params.phy_ulpi_ext_vbus_ind_passthrough)
> + usbcfg |= GUSBCFG_INDICATORPASSTHROUGH;
> + }
> + break;
> + case DWC2_PHY_TYPE_PARAM_UTMI:
> + /* UTMI+ interface */
> + dwc2_dbg(dwc2, "HS UTMI+ PHY selected\n");
> + usbcfg &= ~(GUSBCFG_ULPI_UTMI_SEL | GUSBCFG_PHYIF16);
> + if (dwc2->params.phy_utmi_width == 16)
> + usbcfg |= GUSBCFG_PHYIF16;
> + break;
> + default:
> + dwc2_err(dwc2, "FS PHY selected at HS!\n");
> + break;
> + }
> +
> + if (usbcfg != usbcfg_old) {
> + dwc2_writel(dwc2, usbcfg, GUSBCFG);
> +
> + /* Reset after setting the PHY parameters */
> + retval = dwc2_core_reset(dwc2);
> + if (retval) {
> + dwc2_err(dwc2,
> + "%s: Reset failed, aborting", __func__);
> + return retval;
> + }
> + }
> +
> + return retval;
> +}
> +
> +int dwc2_phy_init(struct dwc2 *dwc2, bool select_phy)
> +{
> + u32 usbcfg;
> + int retval = 0;
> +
> + if ((dwc2->params.speed == DWC2_SPEED_PARAM_FULL ||
> + dwc2->params.speed == DWC2_SPEED_PARAM_LOW) &&
> + dwc2->params.phy_type == DWC2_PHY_TYPE_PARAM_FS) {
> + /* If FS/LS mode with FS/LS PHY */
> + retval = dwc2_fs_phy_init(dwc2, select_phy);
> + if (retval)
> + return retval;
> + } else {
> + /* High speed PHY */
> + retval = dwc2_hs_phy_init(dwc2, select_phy);
> + if (retval)
> + return retval;
> + }
> +
> + usbcfg = dwc2_readl(dwc2, GUSBCFG);
> + usbcfg &= ~GUSBCFG_ULPI_FS_LS;
> + usbcfg &= ~GUSBCFG_ULPI_CLK_SUSP_M;
> + if (dwc2->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI &&
> + dwc2->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED &&
> + dwc2->params.ulpi_fs_ls) {
> + dwc2_dbg(dwc2, "Setting ULPI FSLS\n");
> + usbcfg |= GUSBCFG_ULPI_FS_LS;
> + usbcfg |= GUSBCFG_ULPI_CLK_SUSP_M;
> + }
> + dwc2_writel(dwc2, usbcfg, GUSBCFG);
> +
> + return retval;
> +}
> +
> +int dwc2_gahbcfg_init(struct dwc2 *dwc2)
> +{
> + u32 ahbcfg = dwc2_readl(dwc2, GAHBCFG);
> +
> + switch (dwc2->hw_params.arch) {
> + case GHWCFG2_EXT_DMA_ARCH:
> + dwc2_err(dwc2, "External DMA Mode not supported\n");
> + return -EINVAL;
> +
> + case GHWCFG2_INT_DMA_ARCH:
> + dwc2_dbg(dwc2, "Internal DMA Mode\n");
> + if (dwc2->params.ahbcfg != -1) {
> + ahbcfg &= GAHBCFG_CTRL_MASK;
> + ahbcfg |= dwc2->params.ahbcfg &
> + ~GAHBCFG_CTRL_MASK;
> + }
> + break;
> +
> + case GHWCFG2_SLAVE_ONLY_ARCH:
> + default:
> + dwc2_dbg(dwc2, "Slave Only Mode\n");
> + break;
> + }
> +
> + if (dwc2->params.dma)
> + ahbcfg |= GAHBCFG_DMA_EN;
> + else
> + dwc2->params.dma_desc = false;
> +
> + dwc2_writel(dwc2, ahbcfg, GAHBCFG);
> +
> + return 0;
> +}
> +
> +void dwc2_gusbcfg_init(struct dwc2 *dwc2)
> +{
> + u32 usbcfg;
> +
> + usbcfg = dwc2_readl(dwc2, GUSBCFG);
> + usbcfg &= ~(GUSBCFG_HNPCAP | GUSBCFG_SRPCAP);
> +
> + switch (dwc2->hw_params.op_mode) {
> + case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE:
> + if (dwc2->params.otg_cap ==
> + DWC2_CAP_PARAM_HNP_SRP_CAPABLE)
> + usbcfg |= GUSBCFG_HNPCAP;
> +
> + case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE:
> + case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE:
> + case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST:
> + if (dwc2->params.otg_cap !=
> + DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE)
> + usbcfg |= GUSBCFG_SRPCAP;
> + break;
> +
> + case GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE:
> + case GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE:
> + case GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST:
> + default:
> + break;
> + }
> +
> + dwc2_writel(dwc2, usbcfg, GUSBCFG);
> +}
> +
> +/*
> + * Do core a soft reset of the core. Be careful with this because it
> + * resets all the internal state machines of the core.
> + */
> +int dwc2_core_reset(struct dwc2 *dwc2)
> +{
> + bool wait_for_host_mode = false;
> + uint32_t greset;
> + int ret;
> +
> + dwc2_dbg(dwc2, "%s(%p)\n", __func__, dwc2);
> +
> + /* Wait for AHB master IDLE state. */
> + ret = dwc2_wait_bit_set(dwc2, GRSTCTL, GRSTCTL_AHBIDLE, 10000);
> + if (ret) {
> + pr_info("%s: Timeout! Waiting for AHB master IDLE state\n",
> + __func__);
> + return ret;
> + }
> +
> + /*
> + * If the current mode is host, either due to the force mode
> + * bit being set (which persists after core reset) or the
> + * connector id pin, a core soft reset will temporarily reset
> + * the mode to device. A delay from the IDDIG debounce filter
> + * will occur before going back to host mode.
> + *
> + * Determine whether we will go back into host mode after a
> + * reset and account for this delay after the reset.
> + */
> + {
> + u32 gotgctl = dwc2_readl(dwc2, GOTGCTL);
> + u32 gusbcfg = dwc2_readl(dwc2, GUSBCFG);
> +
> + if (!(gotgctl & GOTGCTL_CONID_B) ||
> + (gusbcfg & GUSBCFG_FORCEHOSTMODE)) {
> + dwc2_dbg(dwc2, "HOST MODE\n");
> + wait_for_host_mode = true;
> + }
> + }
> + /* Core Soft Reset */
> + greset = dwc2_readl(dwc2, GRSTCTL);
> + greset |= GRSTCTL_CSFTRST;
> + dwc2_writel(dwc2, greset, GRSTCTL);
> +
> + ret = dwc2_wait_bit_clear(dwc2, GRSTCTL, GRSTCTL_CSFTRST, 10000);
> + if (ret) {
> + pr_info("%s: Timeout! Waiting for Core Soft Reset\n", __func__);
> + return ret;
> + }
> +
> + /*
> + * Wait for core to come out of reset.
> + * NOTE: This long sleep is _very_ important, otherwise the core will
> + * not stay in host mode after a connector ID change!
> + */
> + mdelay(100);
> +
> + return 0;
> +}
> +
> +/*
> + * This function initializes the DWC2 controller registers and
> + * prepares the core for device mode or host mode operation.
> + *
> + * @param regs Programming view of the DWC2 controller
> + */
> +void dwc2_core_init(struct dwc2 *dwc2)
> +{
> + uint32_t otgctl = 0;
> + uint32_t usbcfg = 0;
> + int retval;
> +
> + dwc2_dbg(dwc2, "%s(%p)\n", __func__, dwc2);
> +
> + /* Common Initialization */
> + usbcfg = dwc2_readl(dwc2, GUSBCFG);
> +
> + /* Set ULPI External VBUS bit if needed */
> + usbcfg &= ~GUSBCFG_ULPI_EXT_VBUS_DRV;
> + if (dwc2->params.phy_ulpi_ext_vbus)
> + usbcfg |= GUSBCFG_ULPI_EXT_VBUS_DRV;
> +
> + /* Set external TS Dline pulsing bit if needed */
> + usbcfg &= ~GUSBCFG_TERMSELDLPULSE;
> + if (dwc2->params.ts_dline)
> + usbcfg |= GUSBCFG_TERMSELDLPULSE;
> +
> + dwc2_writel(dwc2, usbcfg, GUSBCFG);
> +
> + /* Reset the Controller */
> + dwc2_core_reset(dwc2);
> +
> + /*
> + * This programming sequence needs to happen in FS mode before
> + * any other programming occurs
> + */
> + retval = dwc2_phy_init(dwc2, true);
> + if (retval)
> + return;
> +
> + /* Program the GAHBCFG Register */
> + retval = dwc2_gahbcfg_init(dwc2);
> + if (retval)
> + return;
> +
> + /* Program the GUSBCFG register */
> + dwc2_gusbcfg_init(dwc2);
> +
> + /* Program the GOTGCTL register */
> + otgctl = dwc2_readl(dwc2, GOTGCTL);
> + otgctl &= ~GOTGCTL_OTGVER;
> + dwc2_writel(dwc2, otgctl, GOTGCTL);
> +
> + if (dwc2_is_host_mode(dwc2))
> + dwc2_dbg(dwc2, "Host Mode\n");
> + else
> + dwc2_dbg(dwc2, "Device Mode\n");
> +}
> diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
> new file mode 100644
> index 000000000..94f992cb1
> --- /dev/null
> +++ b/drivers/usb/dwc2/core.h
> @@ -0,0 +1,514 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/* Maximum number of Endpoints/HostChannels */
> +#define DWC2_MAX_EPS_CHANNELS 16
> +
> +/**
> + * struct dwc2_core_params - Parameters for configuring the core
> + *
> + * @otg_cap: Specifies the OTG capabilities.
> + * 0 - HNP and SRP capable
> + * 1 - SRP Only capable
> + * 2 - No HNP/SRP capable (always available)
> + * Defaults to best available option (0, 1, then 2)
> + * @host_dma: Specifies whether to use slave or DMA mode for accessing
> + * the data FIFOs. The driver will automatically detect the
> + * value for this parameter if none is specified.
> + * 0 - Slave (always available)
> + * 1 - DMA (default, if available)
> + * @dma_desc_enable: When DMA mode is enabled, specifies whether to use
> + * address DMA mode or descriptor DMA mode for accessing
> + * the data FIFOs. The driver will automatically detect the
> + * value for this if none is specified.
> + * 0 - Address DMA
> + * 1 - Descriptor DMA (default, if available)
> + * @dma_desc_fs_enable: When DMA mode is enabled, specifies whether to use
> + * address DMA mode or descriptor DMA mode for accessing
> + * the data FIFOs in Full Speed mode only. The driver
> + * will automatically detect the value for this if none is
> + * specified.
> + * 0 - Address DMA
> + * 1 - Descriptor DMA in FS (default, if available)
> + * @speed: Specifies the maximum speed of operation in host and
> + * device mode. The actual speed depends on the speed of
> + * the attached device and the value of phy_type.
> + * 0 - High Speed
> + * (default when phy_type is UTMI+ or ULPI)
> + * 1 - Full Speed
> + * (default when phy_type is Full Speed)
> + * @enable_dynamic_fifo: 0 - Use coreConsultant-specified FIFO size parameters
> + * 1 - Allow dynamic FIFO sizing (default, if available)
> + * @en_multiple_tx_fifo: Specifies whether dedicated per-endpoint transmit FIFOs
> + * are enabled for non-periodic IN endpoints in device
> + * mode.
> + * @host_rx_fifo_size: Number of 4-byte words in the Rx FIFO in host mode when
> + * dynamic FIFO sizing is enabled
> + * 16 to 32768
> + * Actual maximum value is autodetected and also
> + * the default.
> + * @host_nperio_tx_fifo_size: Number of 4-byte words in the non-periodic Tx FIFO
> + * in host mode when dynamic FIFO sizing is enabled
> + * 16 to 32768
> + * Actual maximum value is autodetected and also
> + * the default.
> + * @host_perio_tx_fifo_size: Number of 4-byte words in the periodic Tx FIFO in
> + * host mode when dynamic FIFO sizing is enabled
> + * 16 to 32768
> + * Actual maximum value is autodetected and also
> + * the default.
> + * @max_transfer_size: The maximum transfer size supported, in bytes
> + * 2047 to 65,535
> + * Actual maximum value is autodetected and also
> + * the default.
> + * @max_packet_count: The maximum number of packets in a transfer
> + * 15 to 511
> + * Actual maximum value is autodetected and also
> + * the default.
> + * @host_channels: The number of host channel registers to use
> + * 1 to 16
> + * Actual maximum value is autodetected and also
> + * the default.
> + * @phy_type: Specifies the type of PHY interface to use. By default,
> + * the driver will automatically detect the phy_type.
> + * 0 - Full Speed Phy
> + * 1 - UTMI+ Phy
> + * 2 - ULPI Phy
> + * Defaults to best available option (2, 1, then 0)
> + * @phy_utmi_width: Specifies the UTMI+ Data Width (in bits). This parameter
> + * is applicable for a phy_type of UTMI+ or ULPI. (For a
> + * ULPI phy_type, this parameter indicates the data width
> + * between the MAC and the ULPI Wrapper.) Also, this
> + * parameter is applicable only if the OTG_HSPHY_WIDTH cC
> + * parameter was set to "8 and 16 bits", meaning that the
> + * core has been configured to work at either data path
> + * width.
> + * 8 or 16 (default 16 if available)
> + * @phy_ulpi_ddr: Specifies whether the ULPI operates at double or single
> + * data rate. This parameter is only applicable if phy_type
> + * is ULPI.
> + * 0 - single data rate ULPI interface with 8 bit wide
> + * data bus (default)
> + * 1 - double data rate ULPI interface with 4 bit wide
> + * data bus
> + * @phy_ulpi_ext_vbus: For a ULPI phy, specifies whether to use the internal or
> + * external supply to drive the VBus
> + * 0 - Internal supply (default)
> + * 1 - External supply
> + * @i2c_enable: Specifies whether to use the I2Cinterface for a full
> + * speed PHY. This parameter is only applicable if phy_type
> + * is FS.
> + * 0 - No (default)
> + * 1 - Yes
> + * @ipg_isoc_en: Indicates the IPG supports is enabled or disabled.
> + * 0 - Disable (default)
> + * 1 - Enable
> + * @acg_enable: For enabling Active Clock Gating in the controller
> + * 0 - No
> + * 1 - Yes
> + * @ulpi_fs_ls: Make ULPI phy operate in FS/LS mode only
> + * 0 - No (default)
> + * 1 - Yes
> + * @host_support_fs_ls_low_power: Specifies whether low power mode is supported
> + * when attached to a Full Speed or Low Speed device in
> + * host mode.
> + * 0 - Don't support low power mode (default)
> + * 1 - Support low power mode
> + * @host_ls_low_power_phy_clk: Specifies the PHY clock rate in low power mode
> + * when connected to a Low Speed device in host
> + * mode. This parameter is applicable only if
> + * host_support_fs_ls_low_power is enabled.
> + * 0 - 48 MHz
> + * (default when phy_type is UTMI+ or ULPI)
> + * 1 - 6 MHz
> + * (default when phy_type is Full Speed)
> + * @oc_disable: Flag to disable overcurrent condition.
> + * 0 - Allow overcurrent condition to get detected
> + * 1 - Disable overcurrent condtion to get detected
> + * @ts_dline: Enable Term Select Dline pulsing
> + * 0 - No (default)
> + * 1 - Yes
> + * @reload_ctl: Allow dynamic reloading of HFIR register during runtime
> + * 0 - No (default for core < 2.92a)
> + * 1 - Yes (default for core >= 2.92a)
> + * @ahbcfg: This field allows the default value of the GAHBCFG
> + * register to be overridden
> + * -1 - GAHBCFG value will be set to 0x06
> + * (INCR, default)
> + * all others - GAHBCFG value will be overridden with
> + * this value
> + * Not all bits can be controlled like this, the
> + * bits defined by GAHBCFG_CTRL_MASK are controlled
> + * by the driver and are ignored in this
> + * configuration value.
> + * @uframe_sched: True to enable the microframe scheduler
> + * @external_id_pin_ctl: Specifies whether ID pin is handled externally.
> + * Disable CONIDSTSCHNG controller interrupt in such
> + * case.
> + * 0 - No (default)
> + * 1 - Yes
> + * @power_down: Specifies whether the controller support power_down.
> + * If power_down is enabled, the controller will enter
> + * power_down in both peripheral and host mode when
> + * needed.
> + * 0 - No (default)
> + * 1 - Partial power down
> + * 2 - Hibernation
> + * @lpm: Enable LPM support.
> + * 0 - No
> + * 1 - Yes
> + * @lpm_clock_gating: Enable core PHY clock gating.
> + * 0 - No
> + * 1 - Yes
> + * @besl: Enable LPM Errata support.
> + * 0 - No
> + * 1 - Yes
> + * @hird_threshold_en: HIRD or HIRD Threshold enable.
> + * 0 - No
> + * 1 - Yes
> + * @hird_threshold: Value of BESL or HIRD Threshold.
> + * @activate_stm_fs_transceiver: Activate internal transceiver using GGPIO
> + * register.
> + * 0 - Deactivate the transceiver (default)
> + * 1 - Activate the transceiver
> + * @g_dma: Enables gadget dma usage (default: autodetect).
> + * @g_dma_desc: Enables gadget descriptor DMA (default: autodetect).
> + * @g_rx_fifo_size: The periodic rx fifo size for the device, in
> + * DWORDS from 16-32768 (default: 2048 if
> + * possible, otherwise autodetect).
> + * @g_np_tx_fifo_size: The non-periodic tx fifo size for the device in
> + * DWORDS from 16-32768 (default: 1024 if
> + * possible, otherwise autodetect).
> + * @g_tx_fifo_size: An array of TX fifo sizes in dedicated fifo
> + * mode. Each value corresponds to one EP
> + * starting from EP1 (max 15 values). Sizes are
> + * in DWORDS with possible values from from
> + * 16-32768 (default: 256, 256, 256, 256, 768,
> + * 768, 768, 768, 0, 0, 0, 0, 0, 0, 0).
> + * @change_speed_quirk: Change speed configuration to DWC2_SPEED_PARAM_FULL
> + * while full&low speed device connect. And change speed
> + * back to DWC2_SPEED_PARAM_HIGH while device is gone.
> + * 0 - No (default)
> + * 1 - Yes
> + *
> + * The following parameters may be specified when starting the module. These
> + * parameters define how the DWC_otg controller should be configured. A
> + * value of -1 (or any other out of range value) for any parameter means
> + * to read the value from hardware (if possible) or use the builtin
> + * default described above.
> + */
> +struct dwc2_core_params {
> + u8 otg_cap;
> +#define DWC2_CAP_PARAM_HNP_SRP_CAPABLE 0
> +#define DWC2_CAP_PARAM_SRP_ONLY_CAPABLE 1
> +#define DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE 2
> +
> + u8 phy_type;
> +#define DWC2_PHY_TYPE_PARAM_FS 0
> +#define DWC2_PHY_TYPE_PARAM_UTMI 1
> +#define DWC2_PHY_TYPE_PARAM_ULPI 2
> +
> + u8 speed;
> +#define DWC2_SPEED_PARAM_HIGH 0
> +#define DWC2_SPEED_PARAM_FULL 1
> +#define DWC2_SPEED_PARAM_LOW 2
> +
> + u8 phy_utmi_width;
> + bool phy_ulpi_ddr;
> + bool phy_ulpi_ext_vbus;
> + bool phy_ulpi_ext_vbus_ind;
> + bool phy_ulpi_ext_vbus_ind_complement;
> + bool phy_ulpi_ext_vbus_ind_passthrough;
> +
> + bool enable_dynamic_fifo;
> + bool en_multiple_tx_fifo;
> + bool i2c_enable;
> + bool acg_enable;
> + bool ulpi_fs_ls;
> + bool ts_dline;
> + bool reload_ctl;
> + bool uframe_sched;
> + bool external_id_pin_ctl;
> +
> + int power_down;
> +#define DWC2_POWER_DOWN_PARAM_NONE 0
> +#define DWC2_POWER_DOWN_PARAM_PARTIAL 1
> +#define DWC2_POWER_DOWN_PARAM_HIBERNATION 2
> +
> + bool lpm;
> + bool lpm_clock_gating;
> + bool besl;
> + bool hird_threshold_en;
> + u8 hird_threshold;
> + bool activate_stm_fs_transceiver;
> + bool ipg_isoc_en;
> + u16 max_packet_count;
> + u32 max_transfer_size;
> + u32 ahbcfg;
> +
> + bool dma;
> + bool dma_desc;
> +
> + /* Host parameters */
> + bool host_support_fs_ls_low_power;
> + bool host_ls_low_power_phy_clk;
> +
> + u8 host_channels;
> + u16 host_rx_fifo_size;
> + u16 host_nperio_tx_fifo_size;
> + u16 host_perio_tx_fifo_size;
> +
> + /* Gadget parameters */
> + u32 g_rx_fifo_size;
> + u32 g_np_tx_fifo_size;
> + u32 g_tx_fifo_size[DWC2_MAX_EPS_CHANNELS];
> +
> + bool change_speed_quirk;
> +};
> +
> +/**
> + * struct dwc2_hw_params - Autodetected parameters.
> + *
> + * These parameters are the various parameters read from hardware
> + * registers during initialization. They typically contain the best
> + * supported or maximum value that can be configured in the
> + * corresponding dwc2_core_params value.
> + *
> + * The values that are not in dwc2_core_params are documented below.
> + *
> + * @op_mode: Mode of Operation
> + * 0 - HNP- and SRP-Capable OTG (Host & Device)
> + * 1 - SRP-Capable OTG (Host & Device)
> + * 2 - Non-HNP and Non-SRP Capable OTG (Host & Device)
> + * 3 - SRP-Capable Device
> + * 4 - Non-OTG Device
> + * 5 - SRP-Capable Host
> + * 6 - Non-OTG Host
> + * @arch: Architecture
> + * 0 - Slave only
> + * 1 - External DMA
> + * 2 - Internal DMA
> + * @ipg_isoc_en: This feature indicates that the controller supports
> + * the worst-case scenario of Rx followed by Rx
> + * Interpacket Gap (IPG) (32 bitTimes) as per the utmi
> + * specification for any token following ISOC OUT token.
> + * 0 - Don't support
> + * 1 - Support
> + * @power_optimized: Are power optimizations enabled?
> + * @num_dev_ep: Number of device endpoints available
> + * @num_dev_in_eps: Number of device IN endpoints available
> + * @num_dev_perio_in_ep: Number of device periodic IN endpoints
> + * available
> + * @dev_token_q_depth: Device Mode IN Token Sequence Learning Queue
> + * Depth
> + * 0 to 30
> + * @host_perio_tx_q_depth:
> + * Host Mode Periodic Request Queue Depth
> + * 2, 4 or 8
> + * @nperio_tx_q_depth:
> + * Non-Periodic Request Queue Depth
> + * 2, 4 or 8
> + * @hs_phy_type: High-speed PHY interface type
> + * 0 - High-speed interface not supported
> + * 1 - UTMI+
> + * 2 - ULPI
> + * 3 - UTMI+ and ULPI
> + * @fs_phy_type: Full-speed PHY interface type
> + * 0 - Full speed interface not supported
> + * 1 - Dedicated full speed interface
> + * 2 - FS pins shared with UTMI+ pins
> + * 3 - FS pins shared with ULPI pins
> + * @total_fifo_size: Total internal RAM for FIFOs (bytes)
> + * @hibernation: Is hibernation enabled?
> + * @utmi_phy_data_width: UTMI+ PHY data width
> + * 0 - 8 bits
> + * 1 - 16 bits
> + * 2 - 8 or 16 bits
> + * @snpsid: Value from SNPSID register
> + * @dev_ep_dirs: Direction of device endpoints (GHWCFG1)
> + * @g_tx_fifo_size: Power-on values of TxFIFO sizes
> + * @dma_desc_enable: When DMA mode is enabled, specifies whether to use
> + * address DMA mode or descriptor DMA mode for accessing
> + * the data FIFOs. The driver will automatically detect the
> + * value for this if none is specified.
> + * 0 - Address DMA
> + * 1 - Descriptor DMA (default, if available)
> + * @enable_dynamic_fifo: 0 - Use coreConsultant-specified FIFO size parameters
> + * 1 - Allow dynamic FIFO sizing (default, if available)
> + * @en_multiple_tx_fifo: Specifies whether dedicated per-endpoint transmit FIFOs
> + * are enabled for non-periodic IN endpoints in device
> + * mode.
> + * @host_nperio_tx_fifo_size: Number of 4-byte words in the non-periodic Tx FIFO
> + * in host mode when dynamic FIFO sizing is enabled
> + * 16 to 32768
> + * Actual maximum value is autodetected and also
> + * the default.
> + * @host_perio_tx_fifo_size: Number of 4-byte words in the periodic Tx FIFO in
> + * host mode when dynamic FIFO sizing is enabled
> + * 16 to 32768
> + * Actual maximum value is autodetected and also
> + * the default.
> + * @max_transfer_size: The maximum transfer size supported, in bytes
> + * 2047 to 65,535
> + * Actual maximum value is autodetected and also
> + * the default.
> + * @max_packet_count: The maximum number of packets in a transfer
> + * 15 to 511
> + * Actual maximum value is autodetected and also
> + * the default.
> + * @host_channels: The number of host channel registers to use
> + * 1 to 16
> + * Actual maximum value is autodetected and also
> + * the default.
> + * @dev_nperio_tx_fifo_size: Number of 4-byte words in the non-periodic Tx FIFO
> + * in device mode when dynamic FIFO sizing is enabled
> + * 16 to 32768
> + * Actual maximum value is autodetected and also
> + * the default.
> + * @i2c_enable: Specifies whether to use the I2Cinterface for a full
> + * speed PHY. This parameter is only applicable if phy_type
> + * is FS.
> + * 0 - No (default)
> + * 1 - Yes
> + * @acg_enable: For enabling Active Clock Gating in the controller
> + * 0 - Disable
> + * 1 - Enable
> + * @lpm_mode: For enabling Link Power Management in the controller
> + * 0 - Disable
> + * 1 - Enable
> + * @rx_fifo_size: Number of 4-byte words in the Rx FIFO when dynamic
> + * FIFO sizing is enabled 16 to 32768
> + * Actual maximum value is autodetected and also
> + * the default.
> + */
> +struct dwc2_hw_params {
> + unsigned op_mode:3;
> + unsigned arch:2;
> + unsigned dma_desc_enable:1;
> + unsigned enable_dynamic_fifo:1;
> + unsigned en_multiple_tx_fifo:1;
> + unsigned rx_fifo_size:16;
> + unsigned host_nperio_tx_fifo_size:16;
> + unsigned dev_nperio_tx_fifo_size:16;
> + unsigned host_perio_tx_fifo_size:16;
> + unsigned nperio_tx_q_depth:3;
> + unsigned host_perio_tx_q_depth:3;
> + unsigned dev_token_q_depth:5;
> + unsigned max_transfer_size:26;
> + unsigned max_packet_count:11;
> + unsigned host_channels:5;
> + unsigned hs_phy_type:2;
> + unsigned fs_phy_type:2;
> + unsigned i2c_enable:1;
> + unsigned acg_enable:1;
> + unsigned num_dev_ep:4;
> + unsigned num_dev_in_eps:4;
> + unsigned num_dev_perio_in_ep:4;
> + unsigned total_fifo_size:16;
> + unsigned power_optimized:1;
> + unsigned hibernation:1;
> + unsigned utmi_phy_data_width:2;
> + unsigned lpm_mode:1;
> + unsigned ipg_isoc_en:1;
> + u32 snpsid;
> + u32 dev_ep_dirs;
> + u32 g_tx_fifo_size[DWC2_MAX_EPS_CHANNELS];
> +};
> +
> +#define MAX_DEVICE 16
> +#define MAX_ENDPOINT DWC2_MAX_EPS_CHANNELS
> +
> +struct dwc2 {
> + struct device_d *dev;
> + void __iomem *regs;
> + enum usb_dr_mode dr_mode;
> + struct dwc2_hw_params hw_params;
> + struct dwc2_core_params params;
> +
> +#ifdef CONFIG_USB_DWC2_HOST
> + struct usb_host host;
> + u8 in_data_toggle[MAX_DEVICE][MAX_ENDPOINT];
> + u8 out_data_toggle[MAX_DEVICE][MAX_ENDPOINT];
> + int root_hub_devnum;
> +#endif
> +};
> +
> +#define host_to_dwc2(ptr) container_of(ptr, struct dwc2, host)
> +#define gadget_to_dwc2(ptr) container_of(ptr, struct dwc2, gadget)
> +
> +#define dwc2_err(d, arg...) dev_err((d)->dev, ## arg)
> +#define dwc2_warn(d, arg...) dev_err((d)->dev, ## arg)
> +#define dwc2_info(d, arg...) dev_info((d)->dev, ## arg)
> +#define dwc2_dbg(d, arg...) dev_dbg((d)->dev, ## arg)
> +#define dwc2_vdbg(d, arg...) dev_vdbg((d)->dev, ## arg)
> +
> +static inline u32 dwc2_readl(struct dwc2 *dwc2, u32 offset)
> +{
> + u32 val;
> +
> + val = readl(dwc2->regs + offset);
> +
> + return val;
> +}
> +
> +static inline void dwc2_writel(struct dwc2 *dwc2, u32 value, u32 offset)
> +{
> + writel(value, dwc2->regs + offset);
> +}
> +
> +/**
> + * dwc2_wait_bit_set - Waits for bit to be set.
> + * @dwc2: Programming view of DWC2 controller.
> + * @offset: Register's offset where bit/bits must be set.
> + * @mask: Mask of the bit/bits which must be set.
> + * @timeout: Timeout to wait.
> + *
> + * Return: 0 if bit/bits are set or -ETIMEDOUT in case of timeout.
> + */
> +static inline int dwc2_wait_bit_set(struct dwc2 *dwc2, u32 offset, u32 mask,
> + u32 timeout)
> +{
> + u32 i;
> +
> + for (i = 0; i < timeout; i++) {
> + if (dwc2_readl(dwc2, offset) & mask)
> + return 0;
> + udelay(1);
> + }
> +
> + return -ETIMEDOUT;
> +}
> +
> +/**
> + * dwc2_wait_bit_clear - Waits for bit to be clear.
> + * @dwc2: Programming view of DWC2 controller.
> + * @offset: Register's offset where bit/bits must be set.
> + * @mask: Mask of the bit/bits which must be set.
> + * @timeout: Timeout to wait.
> + *
> + * Return: 0 if bit/bits are set or -ETIMEDOUT in case of timeout.
> + */
> +static inline int dwc2_wait_bit_clear(struct dwc2 *dwc2, u32 offset, u32 mask,
> + u32 timeout)
> +{
> + u32 i;
> +
> + for (i = 0; i < timeout; i++) {
> + if (!(dwc2_readl(dwc2, offset) & mask))
> + return 0;
> + udelay(1);
> + }
> +
> + return -ETIMEDOUT;
> +}
> +
> +/*
> + * Returns the mode of operation, host or device
> + */
> +static inline int dwc2_is_host_mode(struct dwc2 *dwc2)
> +{
> + return (dwc2_readl(dwc2, GINTSTS) & GINTSTS_CURMODE_HOST) != 0;
> +}
> +
> +static inline int dwc2_is_device_mode(struct dwc2 *dwc2)
> +{
> + return (dwc2_readl(dwc2, GINTSTS) & GINTSTS_CURMODE_HOST) == 0;
> +}
> diff --git a/drivers/usb/dwc2/dwc2.c b/drivers/usb/dwc2/dwc2.c
> new file mode 100644
> index 000000000..52a790468
> --- /dev/null
> +++ b/drivers/usb/dwc2/dwc2.c
> @@ -0,0 +1,90 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2012 Oleksandr Tymoshenko <gonzo@freebsd.org>
> + * Copyright (C) 2014 Marek Vasut <marex@denx.de>
> + *
> + * Copied from u-Boot
> + */
> +#include <common.h>
> +#include <of.h>
> +#include <dma.h>
> +#include <init.h>
> +#include <errno.h>
> +#include <driver.h>
> +#include <linux/clk.h>
> +
> +#include "dwc2.h"
> +
> +static void dwc2_uninit_common(struct dwc2 *dwc2)
> +{
> + uint32_t hprt0;
> +
> + hprt0 = dwc2_readl(dwc2, HPRT0);
> +
> + /* Put everything in reset. */
> + hprt0 &= ~(HPRT0_ENA | HPRT0_ENACHG | HPRT0_CONNDET | HPRT0_OVRCURRCHG);
> + hprt0 |= HPRT0_RST;
> +
> + dwc2_writel(dwc2, hprt0, HPRT0);
> +}
> +
> +static int dwc2_probe(struct device_d *dev)
> +{
> + struct resource *iores;
> + struct dwc2 *dwc2;
> + int ret;
> +
> + dwc2 = xzalloc(sizeof(struct dwc2));
> + dev->priv = dwc2;
> + dwc2->dev = dev;
> +
> + iores = dev_request_mem_resource(dev, 0);
> + if (IS_ERR(iores))
> + return PTR_ERR(iores);
> + dwc2->regs = IOMEM(iores->start);
> +
> + ret = dwc2_core_snpsid(dwc2);
> + if (ret)
> + goto error;
> +
> + /*
> + * Reset before dwc2_get_hwparams() then it could get power-on real
> + * reset value form registers.
> + */
> + ret = dwc2_core_reset(dwc2);
> + if (ret)
> + goto error;
> +
> + /* Detect config values from hardware */
> + dwc2_get_hwparams(dwc2);
> +
> + dwc2_set_default_params(dwc2);
> +
> + dma_set_mask(dev, DMA_BIT_MASK(32));
> +
> + ret = dwc2_register_host(dwc2);
> +error:
> + return ret;
> +}
> +
> +static void dwc2_remove(struct device_d *dev)
> +{
> + struct dwc2 *dwc2 = dev->priv;
> +
> + dwc2_uninit_common(dwc2);
> +}
> +
> +static const struct of_device_id dwc2_platform_dt_ids[] = {
> + { .compatible = "brcm,bcm2835-usb", },
> + { .compatible = "brcm,bcm2708-usb", },
> + { .compatible = "snps,dwc2", },
> + { }
> +};
> +
> +static struct driver_d dwc2_driver = {
> + .name = "dwc2",
> + .probe = dwc2_probe,
> + .remove = dwc2_remove,
> + .of_compatible = DRV_OF_COMPAT(dwc2_platform_dt_ids),
> +};
> +device_platform_driver(dwc2_driver);
> diff --git a/drivers/usb/dwc2/dwc2.h b/drivers/usb/dwc2/dwc2.h
> new file mode 100644
> index 000000000..35c0d1415
> --- /dev/null
> +++ b/drivers/usb/dwc2/dwc2.h
> @@ -0,0 +1,37 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +#include <usb/usb.h>
> +#include <usb/usb_defs.h>
> +#include <usb/gadget.h>
> +
> +#include "regs.h"
> +#include "core.h"
> +
> +/* Core functions */
> +void dwc2_set_param_otg_cap(struct dwc2 *dwc2);
> +void dwc2_set_param_phy_type(struct dwc2 *dwc2);
> +void dwc2_set_param_speed(struct dwc2 *dwc2);
> +void dwc2_set_param_phy_utmi_width(struct dwc2 *dwc2);
> +void dwc2_set_default_params(struct dwc2 *dwc2);
> +int dwc2_core_snpsid(struct dwc2 *dwc2);
> +void dwc2_get_hwparams(struct dwc2 *dwc2);
> +
> +void dwc2_init_fs_ls_pclk_sel(struct dwc2 *dwc2);
> +void dwc2_flush_all_fifo(struct dwc2 *dwc2);
> +
> +int dwc2_phy_init(struct dwc2 *dwc2, bool select_phy);
> +int dwc2_gahbcfg_init(struct dwc2 *dwc2);
> +void dwc2_gusbcfg_init(struct dwc2 *dwc2);
> +
> +int dwc2_core_reset(struct dwc2 *dwc2);
> +void dwc2_core_init(struct dwc2 *dwc2);
> +
> +/* Host functions */
> +#ifdef CONFIG_USB_DWC2_HOST
> +int dwc2_submit_rh_msg(struct dwc2 *dwc2, struct usb_device *dev,
> + unsigned long pipe, void *buf, int len,
> + struct devrequest *setup);
> +int dwc2_register_host(struct dwc2 *dwc2);
> +#else
> +static inline int dwc2_register_host(struct dwc2 *dwc2) { return 0; }
> +#endif
> +
> diff --git a/drivers/usb/dwc2/host.c b/drivers/usb/dwc2/host.c
> new file mode 100644
> index 000000000..058e2e2bc
> --- /dev/null
> +++ b/drivers/usb/dwc2/host.c
> @@ -0,0 +1,634 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +#include <dma.h>
> +#include "dwc2.h"
> +
> +#define to_dwc2 host_to_dwc2
> +
> +/* Use only HC channel 0. */
> +#define DWC2_HC_CHANNEL 0
> +
> +static int dwc2_eptype[] = {
> + DXEPCTL_EPTYPE_ISO,
> + DXEPCTL_EPTYPE_INTERRUPT,
> + DXEPCTL_EPTYPE_CONTROL,
> + DXEPCTL_EPTYPE_BULK,
> +};
> +
> +static int dwc2_do_split(struct dwc2 *dwc2, struct usb_device *dev)
> +{
> + uint32_t hprt0 = dwc2_readl(dwc2, HPRT0);
> + uint32_t prtspd = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT;
> +
> + return prtspd == HPRT0_SPD_HIGH_SPEED && dev->speed != USB_SPEED_HIGH;
> +}
> +
> +static void dwc2_host_hub_info(struct dwc2 *dwc2, struct usb_device *dev,
> + uint8_t *hub_addr, uint8_t *hub_port)
> +{
> + *hub_addr = dev->devnum;
> + *hub_port = dev->portnr;
> +
> + for (; dev->parent; dev = dev->parent) {
> + if (dev->parent->descriptor->bDeviceClass == USB_CLASS_HUB) {
> + *hub_addr = dev->parent->devnum;
> + *hub_port = dev->parent->portnr;
> + break;
> + }
> + }
> +}
> +
> +static void dwc2_hc_init_split(struct dwc2 *dwc2, struct usb_device *dev,
> + uint8_t hc)
> +{
> + uint8_t hub_addr, hub_port;
> + uint32_t hcsplt = 0;
> +
> + dwc2_host_hub_info(dwc2, dev, &hub_addr, &hub_port);
> +
> + hcsplt = HCSPLT_SPLTENA;
> + hcsplt |= hub_addr << HCSPLT_HUBADDR_SHIFT;
> + hcsplt |= hub_port << HCSPLT_PRTADDR_SHIFT;
> +
> + /* Program the HCSPLIT register for SPLITs */
> + dwc2_writel(dwc2, hcsplt, HCSPLT(hc));
> +}
> +
> +static void dwc2_hc_enable_ints(struct dwc2 *dwc2, uint8_t hc)
> +{
> + uint32_t intmsk;
> + uint32_t hcintmsk = HCINTMSK_CHHLTD;
> +
> + dwc2_writel(dwc2, hcintmsk, HCINTMSK(hc));
> +
> + /* Enable the top level host channel interrupt */
> + intmsk = dwc2_readl(dwc2, HAINTMSK);
> + intmsk |= 1 << hc;
> + dwc2_writel(dwc2, intmsk, HAINTMSK);
> +
> + /* Make sure host channel interrupts are enabled */
> + intmsk = dwc2_readl(dwc2, GINTMSK);
> + intmsk |= GINTSTS_HCHINT;
> + dwc2_writel(dwc2, intmsk, GINTMSK);
> +}
> +
> +/**
> + * Prepares a host channel for transferring packets to/from a specific
> + * endpoint. The HCCHARn register is set up with the characteristics specified
> + * in _hc. Host channel interrupts that may need to be serviced while this
> + * transfer is in progress are enabled.
> + *
> + * @param regs Programming view of DWC2 controller
> + * @param hc Information needed to initialize the host channel
> + */
> +static void dwc2_hc_init(struct dwc2 *dwc2, uint8_t hc,
> + struct usb_device *dev, uint8_t dev_addr, uint8_t ep_num,
> + uint8_t ep_is_in, uint32_t ep_type, uint16_t max_packet)
> +{
> + uint32_t hcchar = (dev_addr << HCCHAR_DEVADDR_SHIFT) |
> + (ep_num << HCCHAR_EPNUM_SHIFT) |
> + (ep_is_in ? HCCHAR_EPDIR : 0) |
> + ep_type |
> + (max_packet << HCCHAR_MPS_SHIFT);
> +
> + if (dev->speed == USB_SPEED_LOW)
> + hcchar |= HCCHAR_LSPDDEV;
> +
> + /* Clear old interrupt conditions for this dwc2 channel */
> + dwc2_writel(dwc2, ~HCINTMSK_RESERVED14_31, HCINT(hc));
> +
> + /* Enable channel interrupts required for this transfer */
> + dwc2_hc_enable_ints(dwc2, hc);
> +
> + /*
> + * Program the HCCHARn register with the endpoint characteristics
> + * for the current transfer.
> + */
> + dwc2_writel(dwc2, hcchar, HCCHAR(hc));
> +
> + /* Program the HCSPLIT register, default to no SPLIT */
> + dwc2_writel(dwc2, 0, HCSPLT(hc));
> +}
> +
> +static int wait_for_chhltd(struct dwc2 *dwc2, u8 hc, uint32_t *sub, u8 *tgl)
> +{
> + int ret;
> + uint32_t hcint, hctsiz, hcchar;
> +
> + ret = dwc2_wait_bit_set(dwc2, HCINT(hc), HCINTMSK_CHHLTD, 10000);
> + if (ret) {
> + hcchar = dwc2_readl(dwc2, HCCHAR(hc));
> + dwc2_writel(dwc2, hcchar | HCCHAR_CHDIS, HCCHAR(hc));
> + dwc2_wait_bit_set(dwc2, HCINT(hc), HCINTMSK_CHHLTD, 10000);
> + return ret;
> + }
> +
> + hcint = dwc2_readl(dwc2, HCINT(hc));
> +
> + if (hcint & HCINTMSK_AHBERR)
> + dwc2_err(dwc2, "%s: AHB error during internal DMA access\n",
> + __func__);
> +
> + if (hcint & HCINTMSK_XFERCOMPL) {
> + hctsiz = dwc2_readl(dwc2, HCTSIZ(hc));
> + *sub = (hctsiz & TSIZ_XFERSIZE_MASK) >> TSIZ_XFERSIZE_SHIFT;
> + *tgl = (hctsiz & TSIZ_SC_MC_PID_MASK) >> TSIZ_SC_MC_PID_SHIFT;
> +
> + dwc2_dbg(dwc2, "%s: HCINT=%08x sub=%u toggle=%d\n", __func__,
> + hcint, *sub, *tgl);
> + return 0;
> + }
> +
> + if (hcint & (HCINTMSK_NAK | HCINTMSK_FRMOVRUN))
> + return -EAGAIN;
> +
> + dwc2_dbg(dwc2, "%s: Unknown channel status: (HCINT=%08x)\n", __func__,
> + hcint);
> + return -EINVAL;
> +}
> +
> +static int transfer_chunk(struct dwc2 *dwc2, u8 hc,
> + u8 *pid, int in, void *buffer, int num_packets,
> + int xfer_len, int *actual_len, int odd_frame)
> +{
> + uint32_t hctsiz, hcchar, sub;
> + dma_addr_t dma_addr;
> + int ret = 0;
> +
> + dma_addr = dma_map_single(dwc2->dev, buffer, xfer_len,
> + in ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
> +
> + dwc2_dbg(dwc2, "chunk: pid=%d xfer_len=%u pkts=%u dma_addr=%llx\n",
> + *pid, xfer_len, num_packets, dma_addr);
Use %da for printing dma_addr, otherwise on 32-bit builds with #define DEBUG,
garbage would be read here.
> +
> + dwc2_writel(dwc2, dma_addr, HCDMA(hc));
> +
> + hctsiz = (xfer_len << TSIZ_XFERSIZE_SHIFT)
> + | (1 << TSIZ_PKTCNT_SHIFT)
> + | (*pid << TSIZ_SC_MC_PID_SHIFT);
> +
> + dwc2_writel(dwc2, hctsiz, HCTSIZ(hc));
> +
> + /* Clear old interrupt conditions for this dwc2 channel. */
> + dwc2_writel(dwc2, 0x3fff, HCINT(hc));
> +
> + /* Set dwc2 channel enable after all other setup is complete. */
> + hcchar = dwc2_readl(dwc2, HCCHAR(hc));
> + hcchar &= ~(HCCHAR_MULTICNT_MASK | HCCHAR_CHDIS);
> + hcchar |= (1 << HCCHAR_MULTICNT_SHIFT) | HCCHAR_CHENA;
> + if (odd_frame)
> + hcchar |= HCCHAR_ODDFRM;
> + else
> + hcchar &= ~HCCHAR_ODDFRM;
> + dwc2_writel(dwc2, hcchar, HCCHAR(hc));
> +
> + ret = wait_for_chhltd(dwc2, hc, &sub, pid);
> + if (ret < 0)
> + goto exit;
> +
> + if (in)
> + xfer_len -= sub;
> + *actual_len = xfer_len;
> +
> +exit:
> + dma_unmap_single(dwc2->dev, dma_addr, xfer_len,
> + in ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
> +
> + return ret;
> +}
> +
> +static int dwc2_submit_packet(struct dwc2 *dwc2, struct usb_device *dev, u8 hc,
> + unsigned long pipe, u8 *pid, int in, void *buf,
> + int len)
> +{
> + int devnum = usb_pipedevice(pipe);
> + int ep = usb_pipeendpoint(pipe);
> + int mps = usb_maxpacket(dev, pipe);
> + int eptype = dwc2_eptype[usb_pipetype(pipe)];
> + int do_split = dwc2_do_split(dwc2, dev);
> + int complete_split = 0;
> + int done = 0;
> + int ret = 0;
> + uint32_t xfer_len;
> + uint32_t num_packets;
> + int stop_transfer = 0;
> + uint32_t max_xfer_len;
> + int ssplit_frame_num = 0;
> +
> + max_xfer_len = dwc2->params.max_packet_count * mps;
> +
> + if (max_xfer_len > dwc2->params.max_transfer_size)
> + max_xfer_len = dwc2->params.max_transfer_size;
> +
> + /* Make sure that max_xfer_len is a multiple of max packet size. */
> + num_packets = max_xfer_len / mps;
> + max_xfer_len = num_packets * mps;
> +
> + /* Initialize channel */
> + dwc2_hc_init(dwc2, hc, dev, devnum, ep, in, eptype, mps);
> +
> + /* Check if the target is a FS/LS device behind a HS hub */
> + if (do_split) {
> + dwc2_hc_init_split(dwc2, dev, hc);
> + num_packets = 1;
> + max_xfer_len = mps;
> + }
> + do {
> + int actual_len = 0;
> + uint32_t hcint, hcsplt;
> + int odd_frame = 0;
> +
> + xfer_len = len - done;
> +
> + if (xfer_len > max_xfer_len)
> + xfer_len = max_xfer_len;
> + else if (xfer_len > mps)
> + num_packets = (xfer_len + mps - 1) / mps;
> + else
> + num_packets = 1;
> +
> + if (complete_split || do_split) {
> + hcsplt = dwc2_readl(dwc2, HCSPLT(hc));
> + if (complete_split)
> + hcsplt |= HCSPLT_COMPSPLT;
> + else if (do_split)
> + hcsplt &= ~HCSPLT_COMPSPLT;
> + dwc2_writel(dwc2, hcsplt, HCSPLT(hc));
> + }
> +
> + if (eptype == DXEPCTL_EPTYPE_INTERRUPT) {
> + int uframe_num = dwc2_readl(dwc2, HFNUM);
> +
> + if (!(uframe_num & 0x1))
> + odd_frame = 1;
> + }
> +
> + ret = transfer_chunk(dwc2, hc, pid,
> + in, (char *)buf + done, num_packets,
> + xfer_len, &actual_len, odd_frame);
> +
> + hcint = dwc2_readl(dwc2, HCINT(hc));
> + if (complete_split) {
> + stop_transfer = 0;
> + if (hcint & HCINTMSK_NYET) {
> + int frame_num = HFNUM_MAX_FRNUM &
> + dwc2_readl(dwc2, HFNUM);
> +
> + ret = 0;
> + if (((frame_num - ssplit_frame_num) &
> + HFNUM_MAX_FRNUM) > 4)
> + ret = -EAGAIN;
> + } else {
> + complete_split = 0;
> + }
> + } else if (do_split) {
> + if (hcint & HCINTMSK_ACK) {
> + ssplit_frame_num = HFNUM_MAX_FRNUM &
> + dwc2_readl(dwc2, HFNUM);
> + ret = 0;
> + complete_split = 1;
> + }
> + }
> +
> + if (ret)
> + break;
> +
> + if (actual_len < xfer_len)
> + stop_transfer = 1;
> +
> + done += actual_len;
> +
> + /* Transactions are done when when either all data is transferred or
> + * there is a short transfer. In case of a SPLIT make sure the CSPLIT
> + * is executed.
> + */
> + } while (((done < len) && !stop_transfer) || complete_split);
> +
> + dwc2_writel(dwc2, 0, HCINTMSK(hc));
> + dwc2_writel(dwc2, 0xFFFFFFFF, HCINT(hc));
> +
> + dev->status = 0;
> + dev->act_len = done;
> +
> + return ret;
> +}
> +
> +static int dwc2_submit_control_msg(struct usb_device *udev,
> + unsigned long pipe, void *buffer, int len,
> + struct devrequest *setup, int timeout)
> +{
> + struct usb_host *host = udev->host;
> + struct dwc2 *dwc2 = to_dwc2(host);
> + int devnum = usb_pipedevice(pipe);
> + int ret, act_len;
> + u8 pid;
> + u8 hc = DWC2_HC_CHANNEL;
> + /* For CONTROL endpoint pid should start with DATA1 */
> + int status_direction;
> +
> + if (devnum == dwc2->root_hub_devnum) {
> + udev->status = 0;
> + udev->speed = USB_SPEED_HIGH;
> + return dwc2_submit_rh_msg(dwc2, udev, pipe, buffer, len, setup);
> + }
> +
> + /* SETUP stage */
> + pid = TSIZ_SC_MC_PID_SETUP;
> + do {
> + ret = dwc2_submit_packet(dwc2, udev, hc, pipe, &pid,
> + 0, setup, 8);
> + } while (ret == -EAGAIN);
> + if (ret)
> + return ret;
> +
> + /* DATA stage */
> + act_len = 0;
> + if (buffer) {
> + pid = TSIZ_SC_MC_PID_DATA1;
> + do {
> + ret = dwc2_submit_packet(dwc2, udev, hc, pipe, &pid,
> + usb_pipein(pipe), buffer, len);
> + act_len += udev->act_len;
> + buffer += udev->act_len;
> + len -= udev->act_len;
> + } while (ret == -EAGAIN);
> + if (ret)
> + return ret;
> + status_direction = usb_pipeout(pipe);
> + } else {
> + /* No-data CONTROL always ends with an IN transaction */
> + status_direction = 1;
> + }
> +
> + /* STATUS stage */
> + pid = TSIZ_SC_MC_PID_DATA1;
> + do {
> + ret = dwc2_submit_packet(dwc2, udev, hc, pipe, &pid,
> + status_direction, NULL, 0);
> + } while (ret == -EAGAIN);
> + if (ret)
> + return ret;
> +
> + udev->act_len = act_len;
> +
> + return 0;
> +}
> +
> +static int dwc2_submit_bulk_msg(struct usb_device *udev, unsigned long pipe,
> + void *buffer, int len, int timeout)
> +{
> + struct usb_host *host = udev->host;
> + struct dwc2 *dwc2 = to_dwc2(host);
> + int devnum = usb_pipedevice(pipe);
> + int ep = usb_pipeendpoint(pipe);
> + int in = usb_pipein(pipe);
> + u8 *pid;
> + u8 hc = DWC2_HC_CHANNEL;
> +
> + if ((devnum >= MAX_DEVICE) || (devnum == dwc2->root_hub_devnum)) {
> + udev->status = 0;
> + return -EINVAL;
> + }
> +
> + if (in)
> + pid = &dwc2->in_data_toggle[devnum][ep];
> + else
> + pid = &dwc2->out_data_toggle[devnum][ep];
> +
> + return dwc2_submit_packet(dwc2, udev, hc, pipe, pid, in, buffer, len);
> +}
> +
> +static int dwc2_submit_int_msg(struct usb_device *udev, unsigned long pipe,
> + void *buffer, int len, int interval)
> +{
> + struct usb_host *host = udev->host;
> + struct dwc2 *dwc2 = to_dwc2(host);
> + int devnum = usb_pipedevice(pipe);
> + int ep = usb_pipeendpoint(pipe);
> + int in = usb_pipein(pipe);
> + u8 *pid;
> + u8 hc = DWC2_HC_CHANNEL;
> + uint64_t start;
> + int ret;
> +
> + if ((devnum >= MAX_DEVICE) || (devnum == dwc2->root_hub_devnum)) {
> + udev->status = 0;
> + return -EINVAL;
> + }
> +
> + if (usb_pipein(pipe))
> + pid = &dwc2->in_data_toggle[devnum][ep];
> + else
> + pid = &dwc2->out_data_toggle[devnum][ep];
> +
> + start = get_time_ns();
> +
> + while (1) {
> + ret = dwc2_submit_packet(dwc2, udev, hc, pipe, pid, in,
> + buffer, len);
> + if (ret != -EAGAIN)
> + return ret;
> + if (is_timeout(start, USB_CNTL_TIMEOUT * MSECOND)) {
> + dwc2_err(dwc2, "Timeout on interrupt endpoint\n");
> + return -ETIMEDOUT;
> + }
> + }
> +}
> +
> +/*
> + * This function initializes the DWC2 controller registers for
> + * host mode.
> + *
> + * This function flushes the Tx and Rx FIFOs and it flushes any entries in the
> + * request queues. Host channels are reset to ensure that they are ready for
> + * performing transfers.
> + *
> + * @param dev USB Device (NULL if driver model is not being used)
> + * @param regs Programming view of DWC2 controller
> + *
> + */
> +static void dwc2_core_host_init(struct device_d *dev,
> + struct dwc2 *dwc2)
> +{
> + uint32_t nptxfifosize = 0;
> + uint32_t ptxfifosize = 0;
> + uint32_t hcchar, hcfg, hprt0, hotgctl, usbcfg;
> + int i, ret, num_channels;
> +
> + dwc2_dbg(dwc2, "%s(%p)\n", __func__, dwc2);
> +
> + /* Set HS/FS Timeout Calibration to 7 (max available value).
> + * The number of PHY clocks that the application programs in
> + * this field is added to the high/full speed interpacket timeout
> + * duration in the core to account for any additional delays
> + * introduced by the PHY. This can be required, because the delay
> + * introduced by the PHY in generating the linestate condition
> + * can vary from one PHY to another.
> + */
> + usbcfg = dwc2_readl(dwc2, GUSBCFG);
> + usbcfg |= GUSBCFG_TOUTCAL(7);
> + dwc2_writel(dwc2, usbcfg, GUSBCFG);
> +
> + /* Restart the Phy Clock */
> + dwc2_writel(dwc2, 0, PCGCTL);
> +
> + /* Initialize Host Configuration Register */
> + dwc2_init_fs_ls_pclk_sel(dwc2);
> + if (dwc2->params.speed == DWC2_SPEED_PARAM_FULL ||
> + dwc2->params.speed == DWC2_SPEED_PARAM_LOW) {
> + hcfg = dwc2_readl(dwc2, HCFG);
> + hcfg |= HCFG_FSLSSUPP;
> + dwc2_writel(dwc2, hcfg, HCFG);
> + }
> +
> + if (dwc2->params.dma_desc) {
> + u32 op_mode = dwc2->hw_params.op_mode;
> +
> + if (dwc2->hw_params.snpsid < DWC2_CORE_REV_2_90a ||
> + !dwc2->hw_params.dma_desc_enable ||
> + op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE ||
> + op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE ||
> + op_mode == GHWCFG2_OP_MODE_UNDEFINED) {
> + dwc2_err(dwc2, "Descriptor DMA not suppported\n");
> + dwc2_err(dwc2, "falling back to buffer DMA mode.\n");
> + dwc2->params.dma_desc = false;
> + } else {
> + hcfg = dwc2_readl(dwc2, HCFG);
> + hcfg |= HCFG_DESCDMA;
> + dwc2_writel(dwc2, hcfg, HCFG);
> + }
> + }
> +
> + /* Configure data FIFO sizes */
> + if (dwc2_readl(dwc2, GHWCFG2) & GHWCFG2_DYNAMIC_FIFO) {
> + /* Rx FIFO */
> + dwc2_writel(dwc2, CONFIG_DWC2_HOST_RX_FIFO_SIZE, GRXFSIZ);
> +
> + /* Non-periodic Tx FIFO */
> + nptxfifosize |= CONFIG_DWC2_HOST_NPERIO_TX_FIFO_SIZE <<
> + FIFOSIZE_DEPTH_SHIFT;
> + nptxfifosize |= CONFIG_DWC2_HOST_RX_FIFO_SIZE <<
> + FIFOSIZE_STARTADDR_SHIFT;
> + dwc2_writel(dwc2, nptxfifosize, GNPTXFSIZ);
> +
> + /* Periodic Tx FIFO */
> + ptxfifosize |= CONFIG_DWC2_HOST_PERIO_TX_FIFO_SIZE <<
> + FIFOSIZE_DEPTH_SHIFT;
> + ptxfifosize |= (CONFIG_DWC2_HOST_RX_FIFO_SIZE +
> + CONFIG_DWC2_HOST_NPERIO_TX_FIFO_SIZE) <<
> + FIFOSIZE_STARTADDR_SHIFT;
> + dwc2_writel(dwc2, ptxfifosize, HPTXFSIZ);
> + }
> +
> + /* Clear Host Set HNP Enable in the OTG Control Register */
> + hotgctl = dwc2_readl(dwc2, GOTGCTL);
> + hotgctl &= ~GOTGCTL_HSTSETHNPEN;
> + dwc2_writel(dwc2, hotgctl, GOTGCTL);
> +
> + /* Make sure the FIFOs are flushed. */
> + dwc2_flush_all_fifo(dwc2);
> +
> + /* Flush out any leftover queued requests. */
> + num_channels = dwc2->params.host_channels;
> + for (i = 0; i < num_channels; i++) {
> + hcchar = dwc2_readl(dwc2, HCCHAR(i));
> + if (!(hcchar & HCCHAR_CHENA))
> + continue;
> + hcchar |= HCCHAR_CHDIS;
> + hcchar &= ~(HCCHAR_CHENA | HCCHAR_EPDIR);
> + dwc2_writel(dwc2, hcchar, HCCHAR(i));
> + }
> +
> + /* Halt all channels to put them into a known state. */
> + for (i = 0; i < num_channels; i++) {
> + hcchar = dwc2_readl(dwc2, HCCHAR(i));
> + if (!(hcchar & HCCHAR_CHENA))
> + continue;
> + hcchar |= HCCHAR_CHENA | HCCHAR_CHDIS;
> + hcchar &= ~HCCHAR_EPDIR;
> +
> + dwc2_writel(dwc2, hcchar, HCCHAR(i));
> + ret = dwc2_wait_bit_clear(dwc2, HCCHAR(i), HCCHAR_CHENA, 10000);
> + if (ret)
> + dwc2_warn(dwc2, "%s: Timeout! Reseting channel %d\n",
> + __func__, i);
> + }
> +
> + /* Turn on the vbus power */
> + if (dwc2_is_host_mode(dwc2)) {
> + hprt0 = dwc2_readl(dwc2, HPRT0);
> + hprt0 &= ~(HPRT0_ENA | HPRT0_CONNDET);
> + hprt0 &= ~(HPRT0_ENACHG | HPRT0_OVRCURRCHG);
> + if (!(hprt0 & HPRT0_PWR)) {
> + hprt0 |= HPRT0_PWR;
> + dwc2_writel(dwc2, hprt0, HPRT0);
> + }
> + }
> +
> + /* Disable all interrupts */
> + dwc2_writel(dwc2, 0, GINTMSK);
> + dwc2_writel(dwc2, 0, HAINTMSK);
> +}
> +
> +static int dwc2_host_init(struct usb_host *host)
> +{
> + struct dwc2 *dwc2 = to_dwc2(host);
> + struct device_d *dev = dwc2->dev;
> + uint32_t hprt0, gusbcfg;
> + int i, j;
> +
> + /* Force Host mode in case the dwc2 controller is otg,
> + * otherwise the mode selection is dictated by the id
> + * pin, thus will require a otg A cable to be plugged-in.
> + */
> + gusbcfg = dwc2_readl(dwc2, GUSBCFG) | GUSBCFG_FORCEHOSTMODE;
> + dwc2_writel(dwc2, gusbcfg, GUSBCFG);
> + mdelay(25);
> +
> + dwc2_core_init(dwc2);
> + dwc2_core_host_init(dev, dwc2);
> +
> + hprt0 = dwc2_readl(dwc2, HPRT0);
> + hprt0 &= ~(HPRT0_ENA | HPRT0_CONNDET);
> + /* clear HPRT0_ENACHG and HPRT0_OVRCURRCHG by writing 1 */
> + hprt0 |= HPRT0_ENACHG | HPRT0_OVRCURRCHG;
> + hprt0 |= HPRT0_RST;
> + dwc2_writel(dwc2, hprt0, HPRT0);
> +
> + mdelay(50);
> +
> + hprt0 = dwc2_readl(dwc2, HPRT0);
> + hprt0 &= ~(HPRT0_ENA | HPRT0_CONNDET | HPRT0_RST);
> + dwc2_writel(dwc2, hprt0, HPRT0);
> +
> + for (i = 0; i < MAX_DEVICE; i++) {
> + for (j = 0; j < MAX_ENDPOINT; j++) {
> + dwc2->in_data_toggle[i][j] = TSIZ_SC_MC_PID_DATA0;
> + dwc2->out_data_toggle[i][j] = TSIZ_SC_MC_PID_DATA0;
> + }
> + }
> +
> + /*
> + * Add a 1 second delay here. This gives the host controller
> + * a bit time before the comminucation with the USB devices
> + * is started (the bus is scanned) and fixes the USB detection
> + * problems with some problematic USB keys.
> + */
> + if (dwc2_is_host_mode(dwc2))
> + mdelay(1000);
> +
> + return 0;
> +}
> +
> +int dwc2_register_host(struct dwc2 *dwc2)
> +{
> + struct usb_host *host;
> +
> + host = &dwc2->host;
> + host->hw_dev = dwc2->dev;
> + host->init = dwc2_host_init;
> + host->submit_bulk_msg = dwc2_submit_bulk_msg;
> + host->submit_control_msg = dwc2_submit_control_msg;
> + host->submit_int_msg = dwc2_submit_int_msg;
> +
> + return usb_register_host(host);
> +}
> diff --git a/drivers/usb/dwc2/regs.h b/drivers/usb/dwc2/regs.h
> new file mode 100644
> index 000000000..2170a0eaa
> --- /dev/null
> +++ b/drivers/usb/dwc2/regs.h
> @@ -0,0 +1,848 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Copyright (C) 2014 Marek Vasut <marex@denx.de>
> + */
> +
> +#ifndef __DWC2_H__
> +#define __DWC2_H__
> +
> +#define HSOTG_REG(x) (x)
> +
> +#define GOTGCTL HSOTG_REG(0x000)
> +#define GOTGCTL_CHIRPEN BIT(27)
> +#define GOTGCTL_MULT_VALID_BC_MASK (0x1f << 22)
> +#define GOTGCTL_MULT_VALID_BC_SHIFT 22
> +#define GOTGCTL_CURMODE BIT(21) /* was missing wtf ? */
> +#define GOTGCTL_OTGVER BIT(20)
> +#define GOTGCTL_BSESVLD BIT(19)
> +#define GOTGCTL_ASESVLD BIT(18)
> +#define GOTGCTL_DBNC_SHORT BIT(17)
> +#define GOTGCTL_CONID_B BIT(16)
> +#define GOTGCTL_DBNCE_FLTR_BYPASS BIT(15)
> +#define GOTGCTL_EMBHOSTEN BIT(12)
> +#define GOTGCTL_DEVHNPEN BIT(11)
> +#define GOTGCTL_HSTSETHNPEN BIT(10)
> +#define GOTGCTL_HNPREQ BIT(9)
> +#define GOTGCTL_HSTNEGSCS BIT(8)
> +#define GOTGCTL_SESREQ BIT(1)
> +#define GOTGCTL_SESREQSCS BIT(0)
> +
> +#define GOTGINT HSOTG_REG(0x004)
> +#define GOTGINT_DBNCE_DONE BIT(19)
> +#define GOTGINT_A_DEV_TOUT_CHG BIT(18)
> +#define GOTGINT_HST_NEG_DET BIT(17)
> +#define GOTGINT_HST_NEG_SUC_STS_CHNG BIT(9)
> +#define GOTGINT_SES_REQ_SUC_STS_CHNG BIT(8)
> +#define GOTGINT_SES_END_DET BIT(2)
> +
> +#define GAHBCFG HSOTG_REG(0x008)
> +#define GAHBCFG_AHB_SINGLE BIT(23)
> +#define GAHBCFG_NOTI_ALL_DMA_WRIT BIT(22)
> +#define GAHBCFG_REM_MEM_SUPP BIT(21)
> +#define GAHBCFG_P_TXF_EMP_LVL BIT(8)
> +#define GAHBCFG_NP_TXF_EMP_LVL BIT(7)
> +#define GAHBCFG_DMA_EN BIT(5)
> +#define GAHBCFG_HBSTLEN_MASK (0xf << 1)
> +#define GAHBCFG_HBSTLEN_SHIFT 1
> +#define GAHBCFG_HBSTLEN_SINGLE 0
> +#define GAHBCFG_HBSTLEN_INCR 1
> +#define GAHBCFG_HBSTLEN_INCR4 3
> +#define GAHBCFG_HBSTLEN_INCR8 5
> +#define GAHBCFG_HBSTLEN_INCR16 7
> +#define GAHBCFG_GLBL_INTR_EN BIT(0)
> +#define GAHBCFG_CTRL_MASK (GAHBCFG_P_TXF_EMP_LVL | \
> + GAHBCFG_NP_TXF_EMP_LVL | \
> + GAHBCFG_DMA_EN | \
> + GAHBCFG_GLBL_INTR_EN)
> +
> +#define GUSBCFG HSOTG_REG(0x00C)
> +#define GUSBCFG_FORCEDEVMODE BIT(30)
> +#define GUSBCFG_FORCEHOSTMODE BIT(29)
> +#define GUSBCFG_TXENDDELAY BIT(28)
> +#define GUSBCFG_ICTRAFFICPULLREMOVE BIT(27)
> +#define GUSBCFG_ICUSBCAP BIT(26)
> +#define GUSBCFG_ULPI_INT_PROT_DIS BIT(25)
> +#define GUSBCFG_INDICATORPASSTHROUGH BIT(24)
> +#define GUSBCFG_INDICATORCOMPLEMENT BIT(23)
> +#define GUSBCFG_TERMSELDLPULSE BIT(22)
> +#define GUSBCFG_ULPI_EXT_VBUS_IND BIT(21)
> +#define GUSBCFG_ULPI_EXT_VBUS_DRV BIT(20)
> +#define GUSBCFG_ULPI_CLK_SUSP_M BIT(19)
> +#define GUSBCFG_ULPI_AUTO_RES BIT(18)
> +#define GUSBCFG_ULPI_FS_LS BIT(17)
> +#define GUSBCFG_OTG_UTMI_FS_SEL BIT(16)
> +#define GUSBCFG_PHY_LP_CLK_SEL BIT(15)
> +#define GUSBCFG_USBTRDTIM_MASK (0xf << 10)
> +#define GUSBCFG_USBTRDTIM_SHIFT 10
> +#define GUSBCFG_HNPCAP BIT(9)
> +#define GUSBCFG_SRPCAP BIT(8)
> +#define GUSBCFG_DDRSEL BIT(7)
> +#define GUSBCFG_PHYSEL BIT(6)
> +#define GUSBCFG_FSINTF BIT(5)
> +#define GUSBCFG_ULPI_UTMI_SEL BIT(4)
> +#define GUSBCFG_PHYIF16 BIT(3)
> +#define GUSBCFG_PHYIF8 (0 << 3)
> +#define GUSBCFG_TOUTCAL_MASK (0x7 << 0)
> +#define GUSBCFG_TOUTCAL_SHIFT 0
> +#define GUSBCFG_TOUTCAL_LIMIT 0x7
> +#define GUSBCFG_TOUTCAL(_x) ((_x) << 0)
> +
> +#define GRSTCTL HSOTG_REG(0x010)
> +#define GRSTCTL_AHBIDLE BIT(31)
> +#define GRSTCTL_DMAREQ BIT(30)
> +#define GRSTCTL_TXFNUM_MASK (0x1f << 6)
> +#define GRSTCTL_TXFNUM_SHIFT 6
> +#define GRSTCTL_TXFNUM_LIMIT 0x1f
> +#define GRSTCTL_TXFNUM(_x) ((_x) << 6)
> +#define GRSTCTL_TXFFLSH BIT(5)
> +#define GRSTCTL_RXFFLSH BIT(4)
> +#define GRSTCTL_IN_TKNQ_FLSH BIT(3)
> +#define GRSTCTL_FRMCNTRRST BIT(2)
> +#define GRSTCTL_HSFTRST BIT(1)
> +#define GRSTCTL_CSFTRST BIT(0)
> +
> +#define GINTSTS HSOTG_REG(0x014)
> +#define GINTMSK HSOTG_REG(0x018)
> +#define GINTSTS_WKUPINT BIT(31)
> +#define GINTSTS_SESSREQINT BIT(30)
> +#define GINTSTS_DISCONNINT BIT(29)
> +#define GINTSTS_CONIDSTSCHNG BIT(28)
> +#define GINTSTS_LPMTRANRCVD BIT(27)
> +#define GINTSTS_PTXFEMP BIT(26)
> +#define GINTSTS_HCHINT BIT(25)
> +#define GINTSTS_PRTINT BIT(24)
> +#define GINTSTS_RESETDET BIT(23)
> +#define GINTSTS_FET_SUSP BIT(22)
> +#define GINTSTS_INCOMPL_IP BIT(21)
> +#define GINTSTS_INCOMPL_SOOUT BIT(21)
> +#define GINTSTS_INCOMPL_SOIN BIT(20)
> +#define GINTSTS_OEPINT BIT(19)
> +#define GINTSTS_IEPINT BIT(18)
> +#define GINTSTS_EPMIS BIT(17)
> +#define GINTSTS_RESTOREDONE BIT(16)
> +#define GINTSTS_EOPF BIT(15)
> +#define GINTSTS_ISOUTDROP BIT(14)
> +#define GINTSTS_ENUMDONE BIT(13)
> +#define GINTSTS_USBRST BIT(12)
> +#define GINTSTS_USBSUSP BIT(11)
> +#define GINTSTS_ERLYSUSP BIT(10)
> +#define GINTSTS_I2CINT BIT(9)
> +#define GINTSTS_ULPI_CK_INT BIT(8)
> +#define GINTSTS_GOUTNAKEFF BIT(7)
> +#define GINTSTS_GINNAKEFF BIT(6)
> +#define GINTSTS_NPTXFEMP BIT(5)
> +#define GINTSTS_RXFLVL BIT(4)
> +#define GINTSTS_SOF BIT(3)
> +#define GINTSTS_OTGINT BIT(2)
> +#define GINTSTS_MODEMIS BIT(1)
> +#define GINTSTS_CURMODE_HOST BIT(0)
> +
> +#define GRXSTSR HSOTG_REG(0x01C)
> +#define GRXSTSP HSOTG_REG(0x020)
> +#define GRXSTS_FN_MASK (0x7f << 25)
> +#define GRXSTS_FN_SHIFT 25
> +#define GRXSTS_PKTSTS_MASK (0xf << 17)
> +#define GRXSTS_PKTSTS_SHIFT 17
> +#define GRXSTS_PKTSTS_GLOBALOUTNAK 1
> +#define GRXSTS_PKTSTS_OUTRX 2
> +#define GRXSTS_PKTSTS_HCHIN 2
> +#define GRXSTS_PKTSTS_OUTDONE 3
> +#define GRXSTS_PKTSTS_HCHIN_XFER_COMP 3
> +#define GRXSTS_PKTSTS_SETUPDONE 4
> +#define GRXSTS_PKTSTS_DATATOGGLEERR 5
> +#define GRXSTS_PKTSTS_SETUPRX 6
> +#define GRXSTS_PKTSTS_HCHHALTED 7
> +#define GRXSTS_HCHNUM_MASK (0xf << 0)
> +#define GRXSTS_HCHNUM_SHIFT 0
> +#define GRXSTS_DPID_MASK (0x3 << 15)
> +#define GRXSTS_DPID_SHIFT 15
> +#define GRXSTS_BYTECNT_MASK (0x7ff << 4)
> +#define GRXSTS_BYTECNT_SHIFT 4
> +#define GRXSTS_EPNUM_MASK (0xf << 0)
> +#define GRXSTS_EPNUM_SHIFT 0
> +
> +#define GRXFSIZ HSOTG_REG(0x024)
> +#define GRXFSIZ_DEPTH_MASK (0xffff << 0)
> +#define GRXFSIZ_DEPTH_SHIFT 0
> +
> +#define GNPTXFSIZ HSOTG_REG(0x028)
> +/* Use FIFOSIZE_* constants to access this register */
> +
> +#define GNPTXSTS HSOTG_REG(0x02C)
> +#define GNPTXSTS_NP_TXQ_TOP_MASK (0x7f << 24)
> +#define GNPTXSTS_NP_TXQ_TOP_SHIFT 24
> +#define GNPTXSTS_NP_TXQ_SPC_AVAIL_MASK (0xff << 16)
> +#define GNPTXSTS_NP_TXQ_SPC_AVAIL_SHIFT 16
> +#define GNPTXSTS_NP_TXQ_SPC_AVAIL_GET(_v) (((_v) >> 16) & 0xff)
> +#define GNPTXSTS_NP_TXF_SPC_AVAIL_MASK (0xffff << 0)
> +#define GNPTXSTS_NP_TXF_SPC_AVAIL_SHIFT 0
> +#define GNPTXSTS_NP_TXF_SPC_AVAIL_GET(_v) (((_v) >> 0) & 0xffff)
> +
> +#define GI2CCTL HSOTG_REG(0x0030)
> +#define GI2CCTL_BSYDNE BIT(31)
> +#define GI2CCTL_RW BIT(30)
> +#define GI2CCTL_I2CDATSE0 BIT(28)
> +#define GI2CCTL_I2CDEVADDR_MASK (0x3 << 26)
> +#define GI2CCTL_I2CDEVADDR_SHIFT 26
> +#define GI2CCTL_I2CSUSPCTL BIT(25)
> +#define GI2CCTL_ACK BIT(24)
> +#define GI2CCTL_I2CEN BIT(23)
> +#define GI2CCTL_ADDR_MASK (0x7f << 16)
> +#define GI2CCTL_ADDR_SHIFT 16
> +#define GI2CCTL_REGADDR_MASK (0xff << 8)
> +#define GI2CCTL_REGADDR_SHIFT 8
> +#define GI2CCTL_RWDATA_MASK (0xff << 0)
> +#define GI2CCTL_RWDATA_SHIFT 0
> +
> +#define GPVNDCTL HSOTG_REG(0x0034)
> +#define GPVNDCTL_REGWR BIT(22)
> +#define GPVNDCTL_NEWREGREQ BIT(25)
> +#define GPVNDCTL_VSTSDONE BIT(27)
> +#define GPVNDCTL_REGADDR_SHIFT 16
> +#define GPVNDCTL_REGADDR_MASK (0x3f << 16)
> +#define GPVNDCTL_REGDATA_SHIFT 0
> +#define GPVNDCTL_REGDATA_MASK 0xff
> +
> +#define GGPIO HSOTG_REG(0x0038)
> +#define GGPIO_STM32_OTG_GCCFG_PWRDWN BIT(16)
> +
> +#define GUID HSOTG_REG(0x003c)
> +#define GSNPSID HSOTG_REG(0x0040)
> +#define GHWCFG1 HSOTG_REG(0x0044)
> +#define GSNPSID_ID_MASK GENMASK(31, 16)
> +
> +#define GHWCFG2 HSOTG_REG(0x0048)
> +#define GHWCFG2_OTG_ENABLE_IC_USB BIT(31)
> +#define GHWCFG2_DEV_TOKEN_Q_DEPTH_MASK (0x1f << 26)
> +#define GHWCFG2_DEV_TOKEN_Q_DEPTH_SHIFT 26
> +#define GHWCFG2_HOST_PERIO_TX_Q_DEPTH_MASK (0x3 << 24)
> +#define GHWCFG2_HOST_PERIO_TX_Q_DEPTH_SHIFT 24
> +#define GHWCFG2_NONPERIO_TX_Q_DEPTH_MASK (0x3 << 22)
> +#define GHWCFG2_NONPERIO_TX_Q_DEPTH_SHIFT 22
> +#define GHWCFG2_MULTI_PROC_INT BIT(20)
> +#define GHWCFG2_DYNAMIC_FIFO BIT(19)
> +#define GHWCFG2_PERIO_EP_SUPPORTED BIT(18)
> +#define GHWCFG2_NUM_HOST_CHAN_MASK (0xf << 14)
> +#define GHWCFG2_NUM_HOST_CHAN_SHIFT 14
> +#define GHWCFG2_NUM_DEV_EP_MASK (0xf << 10)
> +#define GHWCFG2_NUM_DEV_EP_SHIFT 10
> +#define GHWCFG2_FS_PHY_TYPE_MASK (0x3 << 8)
> +#define GHWCFG2_FS_PHY_TYPE_SHIFT 8
> +#define GHWCFG2_FS_PHY_TYPE_NOT_SUPPORTED 0
> +#define GHWCFG2_FS_PHY_TYPE_DEDICATED 1
> +#define GHWCFG2_FS_PHY_TYPE_SHARED_UTMI 2
> +#define GHWCFG2_FS_PHY_TYPE_SHARED_ULPI 3
> +#define GHWCFG2_HS_PHY_TYPE_MASK (0x3 << 6)
> +#define GHWCFG2_HS_PHY_TYPE_SHIFT 6
> +#define GHWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0
> +#define GHWCFG2_HS_PHY_TYPE_UTMI 1
> +#define GHWCFG2_HS_PHY_TYPE_ULPI 2
> +#define GHWCFG2_HS_PHY_TYPE_UTMI_ULPI 3
> +#define GHWCFG2_POINT2POINT BIT(5)
> +#define GHWCFG2_ARCHITECTURE_MASK (0x3 << 3)
> +#define GHWCFG2_ARCHITECTURE_SHIFT 3
> +#define GHWCFG2_SLAVE_ONLY_ARCH 0
> +#define GHWCFG2_EXT_DMA_ARCH 1
> +#define GHWCFG2_INT_DMA_ARCH 2
> +#define GHWCFG2_OP_MODE_MASK (0x7 << 0)
> +#define GHWCFG2_OP_MODE_SHIFT 0
> +#define GHWCFG2_OP_MODE_HNP_SRP_CAPABLE 0
> +#define GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE 1
> +#define GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE 2
> +#define GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3
> +#define GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4
> +#define GHWCFG2_OP_MODE_SRP_CAPABLE_HOST 5
> +#define GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6
> +#define GHWCFG2_OP_MODE_UNDEFINED 7
> +
> +#define GHWCFG3 HSOTG_REG(0x004c)
> +#define GHWCFG3_DFIFO_DEPTH_MASK (0xffff << 16)
> +#define GHWCFG3_DFIFO_DEPTH_SHIFT 16
> +#define GHWCFG3_OTG_LPM_EN BIT(15)
> +#define GHWCFG3_BC_SUPPORT BIT(14)
> +#define GHWCFG3_OTG_ENABLE_HSIC BIT(13)
> +#define GHWCFG3_ADP_SUPP BIT(12)
> +#define GHWCFG3_SYNCH_RESET_TYPE BIT(11)
> +#define GHWCFG3_OPTIONAL_FEATURES BIT(10)
> +#define GHWCFG3_VENDOR_CTRL_IF BIT(9)
> +#define GHWCFG3_I2C BIT(8)
> +#define GHWCFG3_OTG_FUNC BIT(7)
> +#define GHWCFG3_PACKET_SIZE_CNTR_WIDTH_MASK (0x7 << 4)
> +#define GHWCFG3_PACKET_SIZE_CNTR_WIDTH_SHIFT 4
> +#define GHWCFG3_XFER_SIZE_CNTR_WIDTH_MASK (0xf << 0)
> +#define GHWCFG3_XFER_SIZE_CNTR_WIDTH_SHIFT 0
> +
> +#define GHWCFG4 HSOTG_REG(0x0050)
> +#define GHWCFG4_DESC_DMA_DYN BIT(31)
> +#define GHWCFG4_DESC_DMA BIT(30)
> +#define GHWCFG4_NUM_IN_EPS_MASK (0xf << 26)
> +#define GHWCFG4_NUM_IN_EPS_SHIFT 26
> +#define GHWCFG4_DED_FIFO_EN BIT(25)
> +#define GHWCFG4_DED_FIFO_SHIFT 25
> +#define GHWCFG4_SESSION_END_FILT_EN BIT(24)
> +#define GHWCFG4_B_VALID_FILT_EN BIT(23)
> +#define GHWCFG4_A_VALID_FILT_EN BIT(22)
> +#define GHWCFG4_VBUS_VALID_FILT_EN BIT(21)
> +#define GHWCFG4_IDDIG_FILT_EN BIT(20)
> +#define GHWCFG4_NUM_DEV_MODE_CTRL_EP_MASK (0xf << 16)
> +#define GHWCFG4_NUM_DEV_MODE_CTRL_EP_SHIFT 16
> +#define GHWCFG4_UTMI_PHY_DATA_WIDTH_MASK (0x3 << 14)
> +#define GHWCFG4_UTMI_PHY_DATA_WIDTH_SHIFT 14
> +#define GHWCFG4_ACG_SUPPORTED BIT(12)
> +#define GHWCFG4_IPG_ISOC_SUPPORTED BIT(11)
> +#define GHWCFG4_UTMI_PHY_DATA_WIDTH_8 0
> +#define GHWCFG4_UTMI_PHY_DATA_WIDTH_16 1
> +#define GHWCFG4_UTMI_PHY_DATA_WIDTH_8_OR_16 2
> +#define GHWCFG4_XHIBER BIT(7)
> +#define GHWCFG4_HIBER BIT(6)
> +#define GHWCFG4_MIN_AHB_FREQ BIT(5)
> +#define GHWCFG4_POWER_OPTIMIZ BIT(4)
> +#define GHWCFG4_NUM_DEV_PERIO_IN_EP_MASK (0xf << 0)
> +#define GHWCFG4_NUM_DEV_PERIO_IN_EP_SHIFT 0
> +
> +#define GLPMCFG HSOTG_REG(0x0054)
> +#define GLPMCFG_INVSELHSIC BIT(31)
> +#define GLPMCFG_HSICCON BIT(30)
> +#define GLPMCFG_RSTRSLPSTS BIT(29)
> +#define GLPMCFG_ENBESL BIT(28)
> +#define GLPMCFG_LPM_RETRYCNT_STS_MASK (0x7 << 25)
> +#define GLPMCFG_LPM_RETRYCNT_STS_SHIFT 25
> +#define GLPMCFG_SNDLPM BIT(24)
> +#define GLPMCFG_RETRY_CNT_MASK (0x7 << 21)
> +#define GLPMCFG_RETRY_CNT_SHIFT 21
> +#define GLPMCFG_LPM_CHNL_INDX_MASK (0xf << 17)
> +#define GLPMCFG_LPM_CHNL_INDX_SHIFT 17
> +#define GLPMCFG_L1RESUMEOK BIT(16)
> +#define GLPMCFG_SLPSTS BIT(15)
> +#define GLPMCFG_COREL1RES_MASK (0x3 << 13)
> +#define GLPMCFG_COREL1RES_SHIFT 13
> +#define GLPMCFG_HIRD_THRES_MASK (0x1f << 8)
> +#define GLPMCFG_HIRD_THRES_SHIFT 8
> +#define GLPMCFG_HIRD_THRES_EN (0x10 << 8)
> +#define GLPMCFG_ENBLSLPM BIT(7)
> +#define GLPMCFG_BREMOTEWAKE BIT(6)
> +#define GLPMCFG_HIRD_MASK (0xf << 2)
> +#define GLPMCFG_HIRD_SHIFT 2
> +#define GLPMCFG_APPL1RES BIT(1)
> +#define GLPMCFG_LPMCAP BIT(0)
> +
> +#define GPWRDN HSOTG_REG(0x0058)
> +#define GPWRDN_MULT_VAL_ID_BC_MASK (0x1f << 24)
> +#define GPWRDN_MULT_VAL_ID_BC_SHIFT 24
> +#define GPWRDN_ADP_INT BIT(23)
> +#define GPWRDN_BSESSVLD BIT(22)
> +#define GPWRDN_IDSTS BIT(21)
> +#define GPWRDN_LINESTATE_MASK (0x3 << 19)
> +#define GPWRDN_LINESTATE_SHIFT 19
> +#define GPWRDN_STS_CHGINT_MSK BIT(18)
> +#define GPWRDN_STS_CHGINT BIT(17)
> +#define GPWRDN_SRP_DET_MSK BIT(16)
> +#define GPWRDN_SRP_DET BIT(15)
> +#define GPWRDN_CONNECT_DET_MSK BIT(14)
> +#define GPWRDN_CONNECT_DET BIT(13)
> +#define GPWRDN_DISCONN_DET_MSK BIT(12)
> +#define GPWRDN_DISCONN_DET BIT(11)
> +#define GPWRDN_RST_DET_MSK BIT(10)
> +#define GPWRDN_RST_DET BIT(9)
> +#define GPWRDN_LNSTSCHG_MSK BIT(8)
> +#define GPWRDN_LNSTSCHG BIT(7)
> +#define GPWRDN_DIS_VBUS BIT(6)
> +#define GPWRDN_PWRDNSWTCH BIT(5)
> +#define GPWRDN_PWRDNRSTN BIT(4)
> +#define GPWRDN_PWRDNCLMP BIT(3)
> +#define GPWRDN_RESTORE BIT(2)
> +#define GPWRDN_PMUACTV BIT(1)
> +#define GPWRDN_PMUINTSEL BIT(0)
> +
> +#define GDFIFOCFG HSOTG_REG(0x005c)
> +#define GDFIFOCFG_EPINFOBASE_MASK (0xffff << 16)
> +#define GDFIFOCFG_EPINFOBASE_SHIFT 16
> +#define GDFIFOCFG_GDFIFOCFG_MASK (0xffff << 0)
> +#define GDFIFOCFG_GDFIFOCFG_SHIFT 0
> +
> +#define ADPCTL HSOTG_REG(0x0060)
> +#define ADPCTL_AR_MASK (0x3 << 27)
> +#define ADPCTL_AR_SHIFT 27
> +#define ADPCTL_ADP_TMOUT_INT_MSK BIT(26)
> +#define ADPCTL_ADP_SNS_INT_MSK BIT(25)
> +#define ADPCTL_ADP_PRB_INT_MSK BIT(24)
> +#define ADPCTL_ADP_TMOUT_INT BIT(23)
> +#define ADPCTL_ADP_SNS_INT BIT(22)
> +#define ADPCTL_ADP_PRB_INT BIT(21)
> +#define ADPCTL_ADPENA BIT(20)
> +#define ADPCTL_ADPRES BIT(19)
> +#define ADPCTL_ENASNS BIT(18)
> +#define ADPCTL_ENAPRB BIT(17)
> +#define ADPCTL_RTIM_MASK (0x7ff << 6)
> +#define ADPCTL_RTIM_SHIFT 6
> +#define ADPCTL_PRB_PER_MASK (0x3 << 4)
> +#define ADPCTL_PRB_PER_SHIFT 4
> +#define ADPCTL_PRB_DELTA_MASK (0x3 << 2)
> +#define ADPCTL_PRB_DELTA_SHIFT 2
> +#define ADPCTL_PRB_DSCHRG_MASK (0x3 << 0)
> +#define ADPCTL_PRB_DSCHRG_SHIFT 0
> +
> +#define HPTXFSIZ HSOTG_REG(0x100)
> +/* Use FIFOSIZE_* constants to access this register */
> +
> +#define DPTXFSIZN(_a) HSOTG_REG(0x104 + (((_a) - 1) * 4))
> +/* Use FIFOSIZE_* constants to access this register */
> +
> +/* These apply to the GNPTXFSIZ, HPTXFSIZ and DPTXFSIZN registers */
> +#define FIFOSIZE_DEPTH_MASK (0xffff << 16)
> +#define FIFOSIZE_DEPTH_SHIFT 16
> +#define FIFOSIZE_STARTADDR_MASK (0xffff << 0)
> +#define FIFOSIZE_STARTADDR_SHIFT 0
> +#define FIFOSIZE_DEPTH_GET(_x) (((_x) >> 16) & 0xffff)
> +
> +/* Device mode registers */
> +
> +#define DCFG HSOTG_REG(0x800)
> +#define DCFG_DESCDMA_EN BIT(23)
> +#define DCFG_EPMISCNT_MASK (0x1f << 18)
> +#define DCFG_EPMISCNT_SHIFT 18
> +#define DCFG_EPMISCNT_LIMIT 0x1f
> +#define DCFG_EPMISCNT(_x) ((_x) << 18)
> +#define DCFG_IPG_ISOC_SUPPORDED BIT(17)
> +#define DCFG_PERFRINT_MASK (0x3 << 11)
> +#define DCFG_PERFRINT_SHIFT 11
> +#define DCFG_PERFRINT_LIMIT 0x3
> +#define DCFG_PERFRINT(_x) ((_x) << 11)
> +#define DCFG_DEVADDR_MASK (0x7f << 4)
> +#define DCFG_DEVADDR_SHIFT 4
> +#define DCFG_DEVADDR_LIMIT 0x7f
> +#define DCFG_DEVADDR(_x) ((_x) << 4)
> +#define DCFG_NZ_STS_OUT_HSHK BIT(2)
> +#define DCFG_DEVSPD_MASK (0x3 << 0)
> +#define DCFG_DEVSPD_SHIFT 0
> +#define DCFG_DEVSPD_HS 0
> +#define DCFG_DEVSPD_FS 1
> +#define DCFG_DEVSPD_LS 2
> +#define DCFG_DEVSPD_FS48 3
> +
> +#define DCTL HSOTG_REG(0x804)
> +#define DCTL_PWRONPRGDONE BIT(11)
> +#define DCTL_CGOUTNAK BIT(10)
> +#define DCTL_SGOUTNAK BIT(9)
> +#define DCTL_CGNPINNAK BIT(8)
> +#define DCTL_SGNPINNAK BIT(7)
> +#define DCTL_TSTCTL_MASK (0x7 << 4)
> +#define DCTL_TSTCTL_SHIFT 4
> +#define DCTL_GOUTNAKSTS BIT(3)
> +#define DCTL_GNPINNAKSTS BIT(2)
> +#define DCTL_SFTDISCON BIT(1)
> +#define DCTL_RMTWKUPSIG BIT(0)
> +
> +#define DSTS HSOTG_REG(0x808)
> +#define DSTS_SOFFN_MASK (0x3fff << 8)
> +#define DSTS_SOFFN_SHIFT 8
> +#define DSTS_SOFFN_LIMIT 0x3fff
> +#define DSTS_SOFFN(_x) ((_x) << 8)
> +#define DSTS_ERRATICERR BIT(3)
> +#define DSTS_ENUMSPD_MASK (0x3 << 1)
> +#define DSTS_ENUMSPD_SHIFT 1
> +#define DSTS_ENUMSPD_HS 0
> +#define DSTS_ENUMSPD_FS 1
> +#define DSTS_ENUMSPD_LS 2
> +#define DSTS_ENUMSPD_FS48 3
> +#define DSTS_SUSPSTS BIT(0)
> +
> +#define DIEPMSK HSOTG_REG(0x810)
> +#define DIEPMSK_NAKMSK BIT(13)
> +#define DIEPMSK_BNAININTRMSK BIT(9)
> +#define DIEPMSK_TXFIFOUNDRNMSK BIT(8)
> +#define DIEPMSK_TXFIFOEMPTY BIT(7)
> +#define DIEPMSK_INEPNAKEFFMSK BIT(6)
> +#define DIEPMSK_INTKNEPMISMSK BIT(5)
> +#define DIEPMSK_INTKNTXFEMPMSK BIT(4)
> +#define DIEPMSK_TIMEOUTMSK BIT(3)
> +#define DIEPMSK_AHBERRMSK BIT(2)
> +#define DIEPMSK_EPDISBLDMSK BIT(1)
> +#define DIEPMSK_XFERCOMPLMSK BIT(0)
> +
> +#define DOEPMSK HSOTG_REG(0x814)
> +#define DOEPMSK_BNAMSK BIT(9)
> +#define DOEPMSK_BACK2BACKSETUP BIT(6)
> +#define DOEPMSK_STSPHSERCVDMSK BIT(5)
> +#define DOEPMSK_OUTTKNEPDISMSK BIT(4)
> +#define DOEPMSK_SETUPMSK BIT(3)
> +#define DOEPMSK_AHBERRMSK BIT(2)
> +#define DOEPMSK_EPDISBLDMSK BIT(1)
> +#define DOEPMSK_XFERCOMPLMSK BIT(0)
> +
> +#define DAINT HSOTG_REG(0x818)
> +#define DAINTMSK HSOTG_REG(0x81C)
> +#define DAINT_OUTEP_SHIFT 16
> +#define DAINT_OUTEP(_x) (1 << ((_x) + 16))
> +#define DAINT_INEP(_x) (1 << (_x))
> +
> +#define DTKNQR1 HSOTG_REG(0x820)
> +#define DTKNQR2 HSOTG_REG(0x824)
> +#define DTKNQR3 HSOTG_REG(0x830)
> +#define DTKNQR4 HSOTG_REG(0x834)
> +#define DIEPEMPMSK HSOTG_REG(0x834)
> +
> +#define DVBUSDIS HSOTG_REG(0x828)
> +#define DVBUSPULSE HSOTG_REG(0x82C)
> +
> +#define DIEPCTL0 HSOTG_REG(0x900)
> +#define DIEPCTL(_a) HSOTG_REG(0x900 + ((_a) * 0x20))
> +
> +#define DOEPCTL0 HSOTG_REG(0xB00)
> +#define DOEPCTL(_a) HSOTG_REG(0xB00 + ((_a) * 0x20))
> +
> +/* EP0 specialness:
> + * bits[29..28] - reserved (no SetD0PID, SetD1PID)
> + * bits[25..22] - should always be zero, this isn't a periodic endpoint
> + * bits[10..0] - MPS setting different for EP0
> + */
> +#define D0EPCTL_MPS_MASK (0x3 << 0)
> +#define D0EPCTL_MPS_SHIFT 0
> +#define D0EPCTL_MPS_64 0
> +#define D0EPCTL_MPS_32 1
> +#define D0EPCTL_MPS_16 2
> +#define D0EPCTL_MPS_8 3
> +
> +#define DXEPCTL_EPENA BIT(31)
> +#define DXEPCTL_EPDIS BIT(30)
> +#define DXEPCTL_SETD1PID BIT(29)
> +#define DXEPCTL_SETODDFR BIT(29)
> +#define DXEPCTL_SETD0PID BIT(28)
> +#define DXEPCTL_SETEVENFR BIT(28)
> +#define DXEPCTL_SNAK BIT(27)
> +#define DXEPCTL_CNAK BIT(26)
> +#define DXEPCTL_TXFNUM_MASK (0xf << 22)
> +#define DXEPCTL_TXFNUM_SHIFT 22
> +#define DXEPCTL_TXFNUM_LIMIT 0xf
> +#define DXEPCTL_TXFNUM(_x) ((_x) << 22)
> +#define DXEPCTL_STALL BIT(21)
> +#define DXEPCTL_SNP BIT(20)
> +#define DXEPCTL_EPTYPE_MASK (0x3 << 18)
> +#define DXEPCTL_EPTYPE_CONTROL (0x0 << 18)
> +#define DXEPCTL_EPTYPE_ISO (0x1 << 18)
> +#define DXEPCTL_EPTYPE_BULK (0x2 << 18)
> +#define DXEPCTL_EPTYPE_INTERRUPT (0x3 << 18)
> +
> +#define DXEPCTL_NAKSTS BIT(17)
> +#define DXEPCTL_DPID BIT(16)
> +#define DXEPCTL_EOFRNUM BIT(16)
> +#define DXEPCTL_USBACTEP BIT(15)
> +#define DXEPCTL_NEXTEP_MASK (0xf << 11)
> +#define DXEPCTL_NEXTEP_SHIFT 11
> +#define DXEPCTL_NEXTEP_LIMIT 0xf
> +#define DXEPCTL_NEXTEP(_x) ((_x) << 11)
> +#define DXEPCTL_MPS_MASK (0x7ff << 0)
> +#define DXEPCTL_MPS_SHIFT 0
> +#define DXEPCTL_MPS_LIMIT 0x7ff
> +#define DXEPCTL_MPS(_x) ((_x) << 0)
> +
> +#define DIEPINT(_a) HSOTG_REG(0x908 + ((_a) * 0x20))
> +#define DOEPINT(_a) HSOTG_REG(0xB08 + ((_a) * 0x20))
> +#define DXEPINT_SETUP_RCVD BIT(15)
> +#define DXEPINT_NYETINTRPT BIT(14)
> +#define DXEPINT_NAKINTRPT BIT(13)
> +#define DXEPINT_BBLEERRINTRPT BIT(12)
> +#define DXEPINT_PKTDRPSTS BIT(11)
> +#define DXEPINT_BNAINTR BIT(9)
> +#define DXEPINT_TXFIFOUNDRN BIT(8)
> +#define DXEPINT_OUTPKTERR BIT(8)
> +#define DXEPINT_TXFEMP BIT(7)
> +#define DXEPINT_INEPNAKEFF BIT(6)
> +#define DXEPINT_BACK2BACKSETUP BIT(6)
> +#define DXEPINT_INTKNEPMIS BIT(5)
> +#define DXEPINT_STSPHSERCVD BIT(5)
> +#define DXEPINT_INTKNTXFEMP BIT(4)
> +#define DXEPINT_OUTTKNEPDIS BIT(4)
> +#define DXEPINT_TIMEOUT BIT(3)
> +#define DXEPINT_SETUP BIT(3)
> +#define DXEPINT_AHBERR BIT(2)
> +#define DXEPINT_EPDISBLD BIT(1)
> +#define DXEPINT_XFERCOMPL BIT(0)
> +
> +#define DIEPTSIZ0 HSOTG_REG(0x910)
> +#define DIEPTSIZ0_PKTCNT_MASK (0x3 << 19)
> +#define DIEPTSIZ0_PKTCNT_SHIFT 19
> +#define DIEPTSIZ0_PKTCNT_LIMIT 0x3
> +#define DIEPTSIZ0_PKTCNT(_x) ((_x) << 19)
> +#define DIEPTSIZ0_XFERSIZE_MASK (0x7f << 0)
> +#define DIEPTSIZ0_XFERSIZE_SHIFT 0
> +#define DIEPTSIZ0_XFERSIZE_LIMIT 0x7f
> +#define DIEPTSIZ0_XFERSIZE(_x) ((_x) << 0)
> +
> +#define DOEPTSIZ0 HSOTG_REG(0xB10)
> +#define DOEPTSIZ0_SUPCNT_MASK (0x3 << 29)
> +#define DOEPTSIZ0_SUPCNT_SHIFT 29
> +#define DOEPTSIZ0_SUPCNT_LIMIT 0x3
> +#define DOEPTSIZ0_SUPCNT(_x) ((_x) << 29)
> +#define DOEPTSIZ0_PKTCNT BIT(19)
> +#define DOEPTSIZ0_XFERSIZE_MASK (0x7f << 0)
> +#define DOEPTSIZ0_XFERSIZE_SHIFT 0
> +
> +#define DIEPTSIZ(_a) HSOTG_REG(0x910 + ((_a) * 0x20))
> +#define DOEPTSIZ(_a) HSOTG_REG(0xB10 + ((_a) * 0x20))
> +#define DXEPTSIZ_MC_MASK (0x3 << 29)
> +#define DXEPTSIZ_MC_SHIFT 29
> +#define DXEPTSIZ_MC_LIMIT 0x3
> +#define DXEPTSIZ_MC(_x) ((_x) << 29)
> +#define DXEPTSIZ_PKTCNT_MASK (0x3ff << 19)
> +#define DXEPTSIZ_PKTCNT_SHIFT 19
> +#define DXEPTSIZ_PKTCNT_LIMIT 0x3ff
> +#define DXEPTSIZ_PKTCNT_GET(_v) (((_v) >> 19) & 0x3ff)
> +#define DXEPTSIZ_PKTCNT(_x) ((_x) << 19)
> +#define DXEPTSIZ_XFERSIZE_MASK (0x7ffff << 0)
> +#define DXEPTSIZ_XFERSIZE_SHIFT 0
> +#define DXEPTSIZ_XFERSIZE_LIMIT 0x7ffff
> +#define DXEPTSIZ_XFERSIZE_GET(_v) (((_v) >> 0) & 0x7ffff)
> +#define DXEPTSIZ_XFERSIZE(_x) ((_x) << 0)
> +
> +#define DIEPDMA(_a) HSOTG_REG(0x914 + ((_a) * 0x20))
> +#define DOEPDMA(_a) HSOTG_REG(0xB14 + ((_a) * 0x20))
> +
> +#define DTXFSTS(_a) HSOTG_REG(0x918 + ((_a) * 0x20))
> +
> +#define PCGCTL HSOTG_REG(0x0e00)
> +#define PCGCTL_IF_DEV_MODE BIT(31)
> +#define PCGCTL_P2HD_PRT_SPD_MASK (0x3 << 29)
> +#define PCGCTL_P2HD_PRT_SPD_SHIFT 29
> +#define PCGCTL_P2HD_DEV_ENUM_SPD_MASK (0x3 << 27)
> +#define PCGCTL_P2HD_DEV_ENUM_SPD_SHIFT 27
> +#define PCGCTL_MAC_DEV_ADDR_MASK (0x7f << 20)
> +#define PCGCTL_MAC_DEV_ADDR_SHIFT 20
> +#define PCGCTL_MAX_TERMSEL BIT(19)
> +#define PCGCTL_MAX_XCVRSELECT_MASK (0x3 << 17)
> +#define PCGCTL_MAX_XCVRSELECT_SHIFT 17
> +#define PCGCTL_PORT_POWER BIT(16)
> +#define PCGCTL_PRT_CLK_SEL_MASK (0x3 << 14)
> +#define PCGCTL_PRT_CLK_SEL_SHIFT 14
> +#define PCGCTL_ESS_REG_RESTORED BIT(13)
> +#define PCGCTL_EXTND_HIBER_SWITCH BIT(12)
> +#define PCGCTL_EXTND_HIBER_PWRCLMP BIT(11)
> +#define PCGCTL_ENBL_EXTND_HIBER BIT(10)
> +#define PCGCTL_RESTOREMODE BIT(9)
> +#define PCGCTL_RESETAFTSUSP BIT(8)
> +#define PCGCTL_DEEP_SLEEP BIT(7)
> +#define PCGCTL_PHY_IN_SLEEP BIT(6)
> +#define PCGCTL_ENBL_SLEEP_GATING BIT(5)
> +#define PCGCTL_RSTPDWNMODULE BIT(3)
> +#define PCGCTL_PWRCLMP BIT(2)
> +#define PCGCTL_GATEHCLK BIT(1)
> +#define PCGCTL_STOPPCLK BIT(0)
> +
> +#define PCGCCTL1 HSOTG_REG(0xe04)
> +#define PCGCCTL1_TIMER (0x3 << 1)
> +#define PCGCCTL1_GATEEN BIT(0)
> +
> +#define EPFIFO(_a) HSOTG_REG(0x1000 + ((_a) * 0x1000))
> +
> +/* Host Mode Registers */
> +
> +#define HCFG HSOTG_REG(0x0400)
> +#define HCFG_MODECHTIMEN BIT(31)
> +#define HCFG_PERSCHEDENA BIT(26)
> +#define HCFG_FRLISTEN_MASK (0x3 << 24)
> +#define HCFG_FRLISTEN_SHIFT 24
> +#define HCFG_FRLISTEN_8 (0 << 24)
> +#define FRLISTEN_8_SIZE 8
> +#define HCFG_FRLISTEN_16 BIT(24)
> +#define FRLISTEN_16_SIZE 16
> +#define HCFG_FRLISTEN_32 (2 << 24)
> +#define FRLISTEN_32_SIZE 32
> +#define HCFG_FRLISTEN_64 (3 << 24)
> +#define FRLISTEN_64_SIZE 64
> +#define HCFG_DESCDMA BIT(23)
> +#define HCFG_RESVALID_MASK (0xff << 8)
> +#define HCFG_RESVALID_SHIFT 8
> +#define HCFG_ENA32KHZ BIT(7)
> +#define HCFG_FSLSSUPP BIT(2)
> +#define HCFG_FSLSPCLKSEL_MASK (0x3 << 0)
> +#define HCFG_FSLSPCLKSEL_SHIFT 0
> +#define HCFG_FSLSPCLKSEL_30_60_MHZ 0
> +#define HCFG_FSLSPCLKSEL_48_MHZ 1
> +#define HCFG_FSLSPCLKSEL_6_MHZ 2
> +
> +#define HFIR HSOTG_REG(0x0404)
> +#define HFIR_FRINT_MASK (0xffff << 0)
> +#define HFIR_FRINT_SHIFT 0
> +#define HFIR_RLDCTRL BIT(16)
> +
> +#define HFNUM HSOTG_REG(0x0408)
> +#define HFNUM_FRREM_MASK (0xffff << 16)
> +#define HFNUM_FRREM_SHIFT 16
> +#define HFNUM_FRNUM_MASK (0xffff << 0)
> +#define HFNUM_FRNUM_SHIFT 0
> +#define HFNUM_MAX_FRNUM 0x3fff
> +
> +#define HPTXSTS HSOTG_REG(0x0410)
> +#define TXSTS_QTOP_ODD BIT(31)
> +#define TXSTS_QTOP_CHNEP_MASK (0xf << 27)
> +#define TXSTS_QTOP_CHNEP_SHIFT 27
> +#define TXSTS_QTOP_TOKEN_MASK (0x3 << 25)
> +#define TXSTS_QTOP_TOKEN_SHIFT 25
> +#define TXSTS_QTOP_TERMINATE BIT(24)
> +#define TXSTS_QSPCAVAIL_MASK (0xff << 16)
> +#define TXSTS_QSPCAVAIL_SHIFT 16
> +#define TXSTS_FSPCAVAIL_MASK (0xffff << 0)
> +#define TXSTS_FSPCAVAIL_SHIFT 0
> +
> +#define HAINT HSOTG_REG(0x0414)
> +#define HAINTMSK HSOTG_REG(0x0418)
> +#define HFLBADDR HSOTG_REG(0x041c)
> +
> +#define HPRT0 HSOTG_REG(0x0440)
> +#define HPRT0_SPD_MASK (0x3 << 17)
> +#define HPRT0_SPD_SHIFT 17
> +#define HPRT0_SPD_HIGH_SPEED 0
> +#define HPRT0_SPD_FULL_SPEED 1
> +#define HPRT0_SPD_LOW_SPEED 2
> +#define HPRT0_TSTCTL_MASK (0xf << 13)
> +#define HPRT0_TSTCTL_SHIFT 13
> +#define HPRT0_PWR BIT(12)
> +#define HPRT0_LNSTS_MASK (0x3 << 10)
> +#define HPRT0_LNSTS_SHIFT 10
> +#define HPRT0_RST BIT(8)
> +#define HPRT0_SUSP BIT(7)
> +#define HPRT0_RES BIT(6)
> +#define HPRT0_OVRCURRCHG BIT(5)
> +#define HPRT0_OVRCURRACT BIT(4)
> +#define HPRT0_ENACHG BIT(3)
> +#define HPRT0_ENA BIT(2)
> +#define HPRT0_CONNDET BIT(1)
> +#define HPRT0_CONNSTS BIT(0)
> +
> +#define HCCHAR(_ch) HSOTG_REG(0x0500 + 0x20 * (_ch))
> +#define HCCHAR_CHENA BIT(31)
> +#define HCCHAR_CHDIS BIT(30)
> +#define HCCHAR_ODDFRM BIT(29)
> +#define HCCHAR_DEVADDR_MASK (0x7f << 22)
> +#define HCCHAR_DEVADDR_SHIFT 22
> +#define HCCHAR_MULTICNT_MASK (0x3 << 20)
> +#define HCCHAR_MULTICNT_SHIFT 20
> +#define HCCHAR_EPTYPE_MASK (0x3 << 18)
> +#define HCCHAR_EPTYPE_SHIFT 18
> +#define HCCHAR_LSPDDEV BIT(17)
> +#define HCCHAR_EPDIR BIT(15)
> +#define HCCHAR_EPNUM_MASK (0xf << 11)
> +#define HCCHAR_EPNUM_SHIFT 11
> +#define HCCHAR_MPS_MASK (0x7ff << 0)
> +#define HCCHAR_MPS_SHIFT 0
> +
> +#define HCSPLT(_ch) HSOTG_REG(0x0504 + 0x20 * (_ch))
> +#define HCSPLT_SPLTENA BIT(31)
> +#define HCSPLT_COMPSPLT BIT(16)
> +#define HCSPLT_XACTPOS_MASK (0x3 << 14)
> +#define HCSPLT_XACTPOS_SHIFT 14
> +#define HCSPLT_XACTPOS_MID 0
> +#define HCSPLT_XACTPOS_END 1
> +#define HCSPLT_XACTPOS_BEGIN 2
> +#define HCSPLT_XACTPOS_ALL 3
> +#define HCSPLT_HUBADDR_MASK (0x7f << 7)
> +#define HCSPLT_HUBADDR_SHIFT 7
> +#define HCSPLT_PRTADDR_MASK (0x7f << 0)
> +#define HCSPLT_PRTADDR_SHIFT 0
> +
> +#define HCINT(_ch) HSOTG_REG(0x0508 + 0x20 * (_ch))
> +#define HCINTMSK(_ch) HSOTG_REG(0x050c + 0x20 * (_ch))
> +#define HCINTMSK_RESERVED14_31 (0x3ffff << 14)
> +#define HCINTMSK_FRM_LIST_ROLL BIT(13)
> +#define HCINTMSK_XCS_XACT BIT(12)
> +#define HCINTMSK_BNA BIT(11)
> +#define HCINTMSK_DATATGLERR BIT(10)
> +#define HCINTMSK_FRMOVRUN BIT(9)
> +#define HCINTMSK_BBLERR BIT(8)
> +#define HCINTMSK_XACTERR BIT(7)
> +#define HCINTMSK_NYET BIT(6)
> +#define HCINTMSK_ACK BIT(5)
> +#define HCINTMSK_NAK BIT(4)
> +#define HCINTMSK_STALL BIT(3)
> +#define HCINTMSK_AHBERR BIT(2)
> +#define HCINTMSK_CHHLTD BIT(1)
> +#define HCINTMSK_XFERCOMPL BIT(0)
> +
> +#define HCTSIZ(_ch) HSOTG_REG(0x0510 + 0x20 * (_ch))
> +#define TSIZ_DOPNG BIT(31)
> +#define TSIZ_SC_MC_PID_MASK (0x3 << 29)
> +#define TSIZ_SC_MC_PID_SHIFT 29
> +#define TSIZ_SC_MC_PID_DATA0 0
> +#define TSIZ_SC_MC_PID_DATA2 1
> +#define TSIZ_SC_MC_PID_DATA1 2
> +#define TSIZ_SC_MC_PID_MDATA 3
> +#define TSIZ_SC_MC_PID_SETUP 3
> +#define TSIZ_PKTCNT_MASK (0x3ff << 19)
> +#define TSIZ_PKTCNT_SHIFT 19
> +#define TSIZ_NTD_MASK (0xff << 8)
> +#define TSIZ_NTD_SHIFT 8
> +#define TSIZ_SCHINFO_MASK (0xff << 0)
> +#define TSIZ_SCHINFO_SHIFT 0
> +#define TSIZ_XFERSIZE_MASK (0x7ffff << 0)
> +#define TSIZ_XFERSIZE_SHIFT 0
> +
> +#define HCDMA(_ch) HSOTG_REG(0x0514 + 0x20 * (_ch))
> +
> +#define HCDMAB(_ch) HSOTG_REG(0x051c + 0x20 * (_ch))
> +
> +#define HCFIFO(_ch) HSOTG_REG(0x1000 + 0x1000 * (_ch))
> +
> +/**
> + * struct dwc2_dma_desc - DMA descriptor structure,
> + * used for both host and gadget modes
> + *
> + * @status: DMA descriptor status quadlet
> + * @buf: DMA descriptor data buffer pointer
> + *
> + * DMA Descriptor structure contains two quadlets:
> + * Status quadlet and Data buffer pointer.
> + */
> +struct dwc2_dma_desc {
> + u32 status;
> + u32 buf;
> +} __packed;
> +
> +/* Host Mode DMA descriptor status quadlet */
> +
> +#define HOST_DMA_A BIT(31)
> +#define HOST_DMA_STS_MASK (0x3 << 28)
> +#define HOST_DMA_STS_SHIFT 28
> +#define HOST_DMA_STS_PKTERR BIT(28)
> +#define HOST_DMA_EOL BIT(26)
> +#define HOST_DMA_IOC BIT(25)
> +#define HOST_DMA_SUP BIT(24)
> +#define HOST_DMA_ALT_QTD BIT(23)
> +#define HOST_DMA_QTD_OFFSET_MASK (0x3f << 17)
> +#define HOST_DMA_QTD_OFFSET_SHIFT 17
> +#define HOST_DMA_ISOC_NBYTES_MASK (0xfff << 0)
> +#define HOST_DMA_ISOC_NBYTES_SHIFT 0
> +#define HOST_DMA_NBYTES_MASK (0x1ffff << 0)
> +#define HOST_DMA_NBYTES_SHIFT 0
> +#define HOST_DMA_NBYTES_LIMIT 131071
> +
> +#define MAX_DMA_DESC_NUM_GENERIC 64
> +#define MAX_DMA_DESC_NUM_HS_ISOC 256
> +
> + /* DWC OTG HW Release versions */
> +#define DWC2_CORE_REV_2_71a 0x4f54271a
> +#define DWC2_CORE_REV_2_72a 0x4f54272a
> +#define DWC2_CORE_REV_2_80a 0x4f54280a
> +#define DWC2_CORE_REV_2_90a 0x4f54290a
> +#define DWC2_CORE_REV_2_91a 0x4f54291a
> +#define DWC2_CORE_REV_2_92a 0x4f54292a
> +#define DWC2_CORE_REV_2_94a 0x4f54294a
> +#define DWC2_CORE_REV_3_00a 0x4f54300a
> +#define DWC2_CORE_REV_3_10a 0x4f54310a
> +#define DWC2_CORE_REV_4_00a 0x4f54400a
> +#define DWC2_FS_IOT_REV_1_00a 0x5531100a
> +#define DWC2_HS_IOT_REV_1_00a 0x5532100a
> +
> + /* DWC OTG HW Core ID */
> +#define DWC2_OTG_ID 0x4f540000
> +#define DWC2_FS_IOT_ID 0x55310000
> +#define DWC2_HS_IOT_ID 0x55320000
> +
> +/* ==== u-boot ==== */
> +
> +/* Default driver configuration */
> +#define CONFIG_DWC2_MAX_CHANNELS DWC2_MAX_EPS_CHANNELS /* Max # of EPs */
> +#define CONFIG_DWC2_HOST_RX_FIFO_SIZE (516 + CONFIG_DWC2_MAX_CHANNELS)
> +#define CONFIG_DWC2_HOST_NPERIO_TX_FIFO_SIZE 0x100 /* nPeriodic TX FIFO */
> +#define CONFIG_DWC2_HOST_PERIO_TX_FIFO_SIZE 0x200 /* Periodic TX FIFO */
> +
> +#endif /* __DWC2_H__ */
> diff --git a/drivers/usb/dwc2/rhub.c b/drivers/usb/dwc2/rhub.c
> new file mode 100644
> index 000000000..01c938943
> --- /dev/null
> +++ b/drivers/usb/dwc2/rhub.c
> @@ -0,0 +1,419 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +#include "dwc2.h"
> +
> +static struct descriptor {
> + struct usb_hub_descriptor hub;
> + struct usb_device_descriptor device;
> + struct usb_config_descriptor config;
> + struct usb_interface_descriptor interface;
> + struct usb_endpoint_descriptor endpoint;
> +} __attribute__ ((packed)) descriptor = {
> + .hub = {
> + .bLength = USB_DT_HUB_NONVAR_SIZE +
> + ((USB_MAXCHILDREN + 1 + 7) / 8),
> + .bDescriptorType = USB_DT_HUB,
> + .bNbrPorts = 1,
> + .wHubCharacteristics = 0,
> + .bPwrOn2PwrGood = 0,
> + .bHubContrCurrent = 0,
> + .u.hs.DeviceRemovable = {0xff},
> + .u.hs.PortPwrCtrlMask = {}
> + },
> + .device = {
> + .bLength = USB_DT_DEVICE_SIZE,
> + .bDescriptorType = USB_DT_DEVICE,
> + .bcdUSB = __constant_cpu_to_le16(2), /* v2.0 */
> + .bDeviceClass = USB_CLASS_HUB,
> + .bDeviceSubClass = 0,
> + .bDeviceProtocol = USB_HUB_PR_HS_NO_TT,
> + .bMaxPacketSize0 = 64,
> + .idVendor = 0x0000,
> + .idProduct = 0x0000,
> + .bcdDevice = 0x0000,
> + .iManufacturer = 1,
> + .iProduct = 2,
> + .iSerialNumber = 0,
> + .bNumConfigurations = 1
> + },
> + .config = {
> + .bLength = USB_DT_CONFIG_SIZE,
> + .bDescriptorType = USB_DT_CONFIG,
> + .wTotalLength = __constant_cpu_to_le16(
> + USB_DT_CONFIG_SIZE +
> + USB_DT_INTERFACE_SIZE +
> + USB_DT_ENDPOINT_SIZE),
> + .bNumInterfaces = 1,
> + .bConfigurationValue = 1,
> + .iConfiguration = 0,
> + .bmAttributes = USB_CONFIG_ATT_SELFPOWER,
> + .bMaxPower = 0
> + },
> + .interface = {
> + .bLength = USB_DT_INTERFACE_SIZE,
> + .bDescriptorType = USB_DT_INTERFACE,
> + .bInterfaceNumber = 0,
> + .bAlternateSetting = 0,
> + .bNumEndpoints = 1,
> + .bInterfaceClass = USB_CLASS_HUB,
> + .bInterfaceSubClass = 0,
> + .bInterfaceProtocol = 0,
> + .iInterface = 0
> + },
> + .endpoint = {
> + .bLength = USB_DT_ENDPOINT_SIZE,
> + .bDescriptorType = USB_DT_ENDPOINT,
> + .bEndpointAddress = 1 | USB_DIR_IN, /* 0x81 */
> + .bmAttributes = USB_ENDPOINT_XFER_INT,
> + .wMaxPacketSize = __constant_cpu_to_le16(
> + (USB_MAXCHILDREN + 1 + 7) / 8),
> + .bInterval = 255
> + },
> +};
> +
> +static char *language_string = "\x09\x04";
> +static char *vendor_string = "u-boot";
> +static char *product_string = "DWC2 root hub";
> +
> +/*
> + * DWC2 to USB API interface
> + */
> +static int dwc2_submit_rh_msg_in_status(struct dwc2 *dwc2,
> + struct usb_device *dev, void *buffer,
> + int txlen, struct devrequest *cmd)
> +{
> + struct usb_port_status *portsts;
> + uint32_t hprt0 = 0;
> + uint32_t port_status = 0;
> + uint32_t port_change = 0;
> + int len = 0;
> + int speed;
> +
> + switch (cmd->requesttype & (USB_TYPE_MASK | USB_RECIP_MASK)) {
> + case USB_TYPE_STANDARD | USB_RECIP_DEVICE:
> + *(uint16_t *)buffer = cpu_to_le16(1);
> + len = 2;
> + break;
> + case USB_TYPE_STANDARD | USB_RECIP_INTERFACE:
> + case USB_TYPE_STANDARD | USB_RECIP_ENDPOINT:
> + *(uint16_t *)buffer = cpu_to_le16(0);
> + len = 2;
> + break;
> + case USB_RT_HUB: /* USB_TYPE_CLASS | USB_RECIP_DEVICE */
> + *(uint32_t *)buffer = cpu_to_le32(0);
> + len = 4;
> + break;
> + case USB_RT_PORT: /* USB_TYPE_CLASS | USB_RECIP_OTHER */
> + hprt0 = dwc2_readl(dwc2, HPRT0);
> +
> + if (hprt0 & HPRT0_CONNSTS)
> + port_status |= USB_PORT_STAT_CONNECTION;
> + if (hprt0 & HPRT0_ENA)
> + port_status |= USB_PORT_STAT_ENABLE;
> + if (hprt0 & HPRT0_SUSP)
> + port_status |= USB_PORT_STAT_SUSPEND;
> + if (hprt0 & HPRT0_OVRCURRACT)
> + port_status |= USB_PORT_STAT_OVERCURRENT;
> + if (hprt0 & HPRT0_RST)
> + port_status |= USB_PORT_STAT_RESET;
> + if (hprt0 & HPRT0_PWR)
> + port_status |= USB_PORT_STAT_POWER;
> +
> + speed = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT;
> + if (speed == HPRT0_SPD_HIGH_SPEED)
> + port_status |= USB_PORT_STAT_HIGH_SPEED;
> + else if (speed == HPRT0_SPD_LOW_SPEED)
> + port_status |= USB_PORT_STAT_LOW_SPEED;
> +
> + if (hprt0 & HPRT0_ENACHG)
> + port_change |= USB_PORT_STAT_C_ENABLE;
> + if (hprt0 & HPRT0_CONNDET)
> + port_change |= USB_PORT_STAT_C_CONNECTION;
> + if (hprt0 & HPRT0_OVRCURRCHG)
> + port_change |= USB_PORT_STAT_C_OVERCURRENT;
> +
> + portsts = buffer;
> + portsts->wPortStatus = cpu_to_le16(port_status);
> + portsts->wPortChange = cpu_to_le16(port_change);
> + len = sizeof(*portsts);
> +
> + break;
> + default:
> + goto unknown;
> + }
> +
> + dev->act_len = min(len, txlen);
> + dev->status = 0;
> +
> + return 0;
> +
> +unknown:
> + dev->act_len = 0;
> + dev->status = USB_ST_STALLED;
> +
> + return -1;
> +}
> +
> +static void strtodesc(char *dest, char *src, size_t n)
> +{
> + unsigned int i;
> +
> + dest[0] = n;
> + dest[1] = 0x3;
> + for (i = 2; i < n && *src != '\0'; i += 2) {
> + dest[i] = *(src++);
> + dest[i + 1] = 0;
> + }
> +}
> +
> +/* Direction: In ; Request: Descriptor */
> +static int dwc2_submit_rh_msg_in_descriptor(struct usb_device *dev,
> + void *buffer, int txlen,
> + struct devrequest *cmd)
> +{
> + int len = 0;
> + char *src;
> + uint16_t wValue = le16_to_cpu(cmd->value);
> + uint16_t wLength = le16_to_cpu(cmd->length);
> +
> + switch (cmd->requesttype & (USB_TYPE_MASK | USB_RECIP_MASK)) {
> + case USB_TYPE_STANDARD | USB_RECIP_DEVICE:
> + switch (wValue >> 8) {
> + case USB_DT_DEVICE:
> + debug("USB_DT_DEVICE request\n");
> + len = min3(txlen, (int)descriptor.device.bLength, (int)wLength);
> + memcpy(buffer, &descriptor.device, len);
> + break;
> + case USB_DT_CONFIG:
> + debug("USB_DT_CONFIG config\n");
> + len = min3(txlen, (int)descriptor.config.wTotalLength, (int)wLength);
> + memcpy(buffer, &descriptor.config, len);
> + break;
> + case USB_DT_STRING:
> + debug("USB_DT_STRING: %#x\n", wValue);
> + switch (wValue & 0xff) {
> + case 0: /* Language */
> + src = language_string;
> + len = strlen(src) + 2;
> + ((char *)buffer)[0] = len;
> + ((char *)buffer)[1] = 0x03;
> + memcpy(buffer + 2, src, strlen(src));
> + break;
> + case 1: /* Vendor */
> + src = vendor_string;
> + len = 2 * strlen(src) + 2;
> + strtodesc(buffer, src, len);
> + break;
> + case 2: /* Product */
> + src = product_string;
> + len = 2 * strlen(src) + 2;
> + strtodesc(buffer, src, len);
> + break;
> + default:
> + debug("%s(): unknown string index 0x%x\n", __func__, wValue & 0xff);
> + goto unknown;
> + }
> + len = min3(txlen, len, (int)wLength);
> + break;
> + default:
> + debug("%s(): unknown requesttype: 0x%x\n", __func__,
> + cmd->requesttype & (USB_TYPE_MASK | USB_RECIP_MASK));
> + goto unknown;
> + }
> + break;
> +
> + case USB_RT_HUB: /* USB_TYPE_CLASS | USB_RECIP_DEVICE */
> + debug("USB_RT_HUB\n");
> +
> + len = min3(txlen, (int)descriptor.hub.bLength, (int)wLength);
> + memcpy(buffer, &descriptor.hub, len);
> + break;
> + default:
> + goto unknown;
> + }
> +
> + dev->act_len = len;
> + dev->status = 0;
> +
> + return 0;
> +
> +unknown:
> + dev->act_len = 0;
> + dev->status = USB_ST_STALLED;
> +
> + return -1;
> +}
> +
> +/* Direction: In ; Request: Configuration */
> +static int dwc2_submit_rh_msg_in_configuration(struct usb_device *dev,
> + void *buffer, int txlen,
> + struct devrequest *cmd)
> +{
> + int len = 0;
> +
> + switch (cmd->requesttype & (USB_TYPE_MASK | USB_RECIP_MASK)) {
> + case USB_TYPE_STANDARD | USB_RECIP_DEVICE:
> + *(uint8_t *)buffer = 0x01;
> + len = min(txlen, 1);
> + break;
> + default:
> + goto unknown;
> + }
> +
> + dev->act_len = len;
> + dev->status = 0;
> +
> + return 0;
> +
> +unknown:
> + dev->act_len = 0;
> + dev->status = USB_ST_STALLED;
> +
> + return -1;
> +}
> +
> +/* Direction: In */
> +static int dwc2_submit_rh_msg_in(struct dwc2 *dwc2,
> + struct usb_device *dev, void *buffer,
> + int txlen, struct devrequest *cmd)
> +{
> + switch (cmd->request) {
> + case USB_REQ_GET_STATUS:
> + return dwc2_submit_rh_msg_in_status(dwc2, dev, buffer,
> + txlen, cmd);
> + case USB_REQ_GET_DESCRIPTOR:
> + return dwc2_submit_rh_msg_in_descriptor(dev, buffer,
> + txlen, cmd);
> + case USB_REQ_GET_CONFIGURATION:
> + return dwc2_submit_rh_msg_in_configuration(dev, buffer,
> + txlen, cmd);
> + default:
> + dev->act_len = 0;
> + dev->status = USB_ST_STALLED;
> +
> + return -1;
> + }
> +}
> +
> +/* Direction: Out */
> +static int dwc2_submit_rh_msg_out(struct dwc2 *dwc2,
> + struct usb_device *dev,
> + void *buffer, int txlen,
> + struct devrequest *cmd)
> +{
> + uint16_t wValue = le16_to_cpu(cmd->value);
> + uint32_t hprt0;
> +
> + switch (cmd->requesttype & (USB_TYPE_MASK | USB_RECIP_MASK)) {
> + case USB_TYPE_STANDARD | USB_RECIP_DEVICE:
> + switch (cmd->request) {
> + case USB_REQ_SET_ADDRESS:
> + dwc2_dbg(dwc2, "set root hub addr %d\n", wValue);
> + dwc2->root_hub_devnum = wValue;
> + break;
> + case USB_REQ_SET_CONFIGURATION:
> + break;
> + default:
> + goto unknown;
> + }
> + break;
> + case USB_TYPE_STANDARD | USB_RECIP_ENDPOINT:
> + case USB_RT_HUB: /* USB_TYPE_CLASS | USB_RECIP_DEVICE */
> + switch (cmd->request) {
> + case USB_REQ_CLEAR_FEATURE:
> + break;
> + }
> + break;
> + case USB_RT_PORT: /* USB_TYPE_CLASS | USB_RECIP_OTHER */
> + switch (cmd->request) {
> + case USB_REQ_CLEAR_FEATURE:
> + hprt0 = dwc2_readl(dwc2, HPRT0);
> + hprt0 &= ~(HPRT0_ENA | HPRT0_CONNDET
> + | HPRT0_ENACHG | HPRT0_OVRCURRCHG);
> + switch (wValue) {
> + case USB_PORT_FEAT_ENABLE:
> + hprt0 |= HPRT0_ENA;
> + break;
> + case USB_PORT_FEAT_SUSPEND:
> + break;
> + case USB_PORT_FEAT_POWER:
> + break;
> + case USB_PORT_FEAT_C_CONNECTION:
> + hprt0 |= HPRT0_CONNDET;
> + break;
> + case USB_PORT_FEAT_C_ENABLE:
> + hprt0 |= HPRT0_ENACHG;
> + break;
> + case USB_PORT_FEAT_C_OVER_CURRENT:
> + hprt0 |= HPRT0_OVRCURRCHG;
> + break;
> + default:
> + dwc2_dbg(dwc2, "unknown feature 0x%x\n", wValue);
> + goto unknown;
> + }
> + dwc2_writel(dwc2, hprt0, HPRT0);
> + break;
> + case USB_REQ_SET_FEATURE:
> + hprt0 = dwc2_readl(dwc2, HPRT0);
> + hprt0 &= ~(HPRT0_ENA | HPRT0_CONNDET
> + | HPRT0_ENACHG | HPRT0_OVRCURRCHG);
> + switch (wValue) {
> + case USB_PORT_FEAT_SUSPEND:
> + break;
> + case USB_PORT_FEAT_RESET:
> + hprt0 |= HPRT0_RST;
> + dwc2_writel(dwc2, hprt0, HPRT0);
> +
> + mdelay(60);
> +
> + hprt0 = dwc2_readl(dwc2, HPRT0);
> + hprt0 &= ~HPRT0_RST;
> + dwc2_writel(dwc2, hprt0, HPRT0);
> + break;
> + case USB_PORT_FEAT_POWER:
> + break;
> + case USB_PORT_FEAT_ENABLE:
> + /* Set by the core after a reset */
> + break;
> + default:
> + dwc2_dbg(dwc2, "unknown feature 0x%x\n", wValue);
> + goto unknown;
> + }
> + break;
> + default: goto unknown;
> + }
> + break;
> + default:
> + goto unknown;
> + }
> +
> + dev->act_len = 0;
> + dev->status = 0;
> +
> + return 0;
> +
> +unknown:
> + dev->act_len = 0;
> + dev->status = USB_ST_STALLED;
> + return -1;
> +}
> +
> +int
> +dwc2_submit_rh_msg(struct dwc2 *dwc2, struct usb_device *dev,
> + unsigned long pipe, void *buffer, int txlen,
> + struct devrequest *cmd)
> +{
> + int stat = 0;
> +
> + if (usb_pipeint(pipe)) {
> + dwc2_err(dwc2, "Root-Hub submit IRQ: NOT implemented\n");
> + return 0;
> + }
> +
> + if (cmd->requesttype & USB_DIR_IN)
> + stat = dwc2_submit_rh_msg_in(dwc2, dev, buffer, txlen, cmd);
> + else
> + stat = dwc2_submit_rh_msg_out(dwc2, dev, buffer, txlen, cmd);
> +
> + mdelay(1);
> + return stat;
> +}
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2020-07-22 6:36 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-21 12:05 [PATCH v3 00/14] usb: dwc2: Add host and gadget driver Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 01/14] Revert "usb: Add dwc2 host driver" Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 02/14] usb: dwc2: Add host controller driver Jules Maselbas
2020-07-22 6:36 ` Ahmad Fatoum [this message]
2020-07-22 9:12 ` Jules Maselbas
2020-07-22 9:18 ` Ahmad Fatoum
2020-07-22 9:21 ` Jules Maselbas
2020-08-10 20:26 ` Sascha Hauer
2020-07-21 12:05 ` [PATCH v3 03/14] usb: dwc2: host: Read dr_mode from device tree Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 04/14] usb: dwc2: Rework roothub interface Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 05/14] usb: dwc2: Rework timeout Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 06/14] usb: dwc2: host: Handle dma mapping errors Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 07/14] usb: dwc2: host: Dynamic fifo size support from Linux Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 08/14] usb: dwc2: host: Fix toggle reset Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 09/14] usb: dwc2: host: Rewrite dwc2_hc_init Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 10/14] usb: dwc2: Add function to flush tx fifo Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 11/14] usb: dwc2: Add structure for gadget driver Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 12/14] usb: dwc2: Add " Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 13/14] usb: dwc2: Use register_otg_device Jules Maselbas
2020-07-21 12:06 ` [PATCH v3 14/14] usb: dwc2: Add ulpi phy function Jules Maselbas
2020-08-10 20:34 ` Sascha Hauer
2020-08-11 9:31 ` Jules Maselbas
2020-08-10 20:23 ` [PATCH v3 00/14] usb: dwc2: Add host and gadget driver Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c6c0ba75-68dc-6977-2c5f-77eabe36a63d@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=jmaselbas@kalray.eu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox