* [PATCH 1/2] ARM: boards: polyhex-debix: enable HAB support @ 2023-12-20 14:54 Marco Felsch 2023-12-20 14:54 ` [PATCH 2/2] ARM: boards: polyhex-debix: fix file mode for 8g-lpddr4-timing.c Marco Felsch 2023-12-20 15:44 ` [PATCH 1/2] ARM: boards: polyhex-debix: enable HAB support Ahmad Fatoum 0 siblings, 2 replies; 5+ messages in thread From: Marco Felsch @ 2023-12-20 14:54 UTC (permalink / raw) To: barebox From: Rouven Czerwinski <r.czerwinski@pengutronix.de> Include the gencsf header to enable the secure-boot images. Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de> --- arch/arm/boards/polyhex-debix/flash-header-polyhex-debix.imxcfg | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boards/polyhex-debix/flash-header-polyhex-debix.imxcfg b/arch/arm/boards/polyhex-debix/flash-header-polyhex-debix.imxcfg index 663bd102e9a2..d619995496ac 100644 --- a/arch/arm/boards/polyhex-debix/flash-header-polyhex-debix.imxcfg +++ b/arch/arm/boards/polyhex-debix/flash-header-polyhex-debix.imxcfg @@ -5,3 +5,4 @@ soc imx8mp loadaddr 0x920000 max_load_size 0x3f000 ivtofs 0x0 +#include <mach/imx/habv4-imx8-gencsf.h> -- 2.39.2 ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 2/2] ARM: boards: polyhex-debix: fix file mode for 8g-lpddr4-timing.c 2023-12-20 14:54 [PATCH 1/2] ARM: boards: polyhex-debix: enable HAB support Marco Felsch @ 2023-12-20 14:54 ` Marco Felsch 2023-12-20 15:44 ` [PATCH 1/2] ARM: boards: polyhex-debix: enable HAB support Ahmad Fatoum 1 sibling, 0 replies; 5+ messages in thread From: Marco Felsch @ 2023-12-20 14:54 UTC (permalink / raw) To: barebox Drop the execution mode from the file. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> --- arch/arm/boards/polyhex-debix/8g-lpddr4-timing.c | 0 1 file changed, 0 insertions(+), 0 deletions(-) mode change 100755 => 100644 arch/arm/boards/polyhex-debix/8g-lpddr4-timing.c diff --git a/arch/arm/boards/polyhex-debix/8g-lpddr4-timing.c b/arch/arm/boards/polyhex-debix/8g-lpddr4-timing.c old mode 100755 new mode 100644 -- 2.39.2 ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 1/2] ARM: boards: polyhex-debix: enable HAB support 2023-12-20 14:54 [PATCH 1/2] ARM: boards: polyhex-debix: enable HAB support Marco Felsch 2023-12-20 14:54 ` [PATCH 2/2] ARM: boards: polyhex-debix: fix file mode for 8g-lpddr4-timing.c Marco Felsch @ 2023-12-20 15:44 ` Ahmad Fatoum 2023-12-20 15:48 ` Marco Felsch 1 sibling, 1 reply; 5+ messages in thread From: Ahmad Fatoum @ 2023-12-20 15:44 UTC (permalink / raw) To: Marco Felsch, barebox Hello Marco, On 20.12.23 15:54, Marco Felsch wrote: > From: Rouven Czerwinski <r.czerwinski@pengutronix.de> > > Include the gencsf header to enable the secure-boot images. > > Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de> Any downside in just doing this for all i.MX8M boards? Thanks, Ahmad > --- > arch/arm/boards/polyhex-debix/flash-header-polyhex-debix.imxcfg | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/arch/arm/boards/polyhex-debix/flash-header-polyhex-debix.imxcfg b/arch/arm/boards/polyhex-debix/flash-header-polyhex-debix.imxcfg > index 663bd102e9a2..d619995496ac 100644 > --- a/arch/arm/boards/polyhex-debix/flash-header-polyhex-debix.imxcfg > +++ b/arch/arm/boards/polyhex-debix/flash-header-polyhex-debix.imxcfg > @@ -5,3 +5,4 @@ soc imx8mp > loadaddr 0x920000 > max_load_size 0x3f000 > ivtofs 0x0 > +#include <mach/imx/habv4-imx8-gencsf.h> -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 1/2] ARM: boards: polyhex-debix: enable HAB support 2023-12-20 15:44 ` [PATCH 1/2] ARM: boards: polyhex-debix: enable HAB support Ahmad Fatoum @ 2023-12-20 15:48 ` Marco Felsch 2023-12-20 16:00 ` Ahmad Fatoum 0 siblings, 1 reply; 5+ messages in thread From: Marco Felsch @ 2023-12-20 15:48 UTC (permalink / raw) To: Ahmad Fatoum; +Cc: barebox On 23-12-20, Ahmad Fatoum wrote: > Hello Marco, > > On 20.12.23 15:54, Marco Felsch wrote: > > From: Rouven Czerwinski <r.czerwinski@pengutronix.de> > > > > Include the gencsf header to enable the secure-boot images. > > > > Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de> > > Any downside in just doing this for all i.MX8M boards? Thought about this too. If HABV4 is not enabled this will have no impact. I didn't added the support for all boards since some custom boards may don't want this. What about adding it to all EVK boards? Regards, Marco > Thanks, > Ahmad > > > --- > > arch/arm/boards/polyhex-debix/flash-header-polyhex-debix.imxcfg | 1 + > > 1 file changed, 1 insertion(+) > > > > diff --git a/arch/arm/boards/polyhex-debix/flash-header-polyhex-debix.imxcfg b/arch/arm/boards/polyhex-debix/flash-header-polyhex-debix.imxcfg > > index 663bd102e9a2..d619995496ac 100644 > > --- a/arch/arm/boards/polyhex-debix/flash-header-polyhex-debix.imxcfg > > +++ b/arch/arm/boards/polyhex-debix/flash-header-polyhex-debix.imxcfg > > @@ -5,3 +5,4 @@ soc imx8mp > > loadaddr 0x920000 > > max_load_size 0x3f000 > > ivtofs 0x0 > > +#include <mach/imx/habv4-imx8-gencsf.h> > > -- > Pengutronix e.K. | | > Steuerwalder Str. 21 | http://www.pengutronix.de/ | > 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | > > ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 1/2] ARM: boards: polyhex-debix: enable HAB support 2023-12-20 15:48 ` Marco Felsch @ 2023-12-20 16:00 ` Ahmad Fatoum 0 siblings, 0 replies; 5+ messages in thread From: Ahmad Fatoum @ 2023-12-20 16:00 UTC (permalink / raw) To: Marco Felsch; +Cc: barebox Hello Marco, On 20.12.23 16:48, Marco Felsch wrote: > On 23-12-20, Ahmad Fatoum wrote: >> Hello Marco, >> >> On 20.12.23 15:54, Marco Felsch wrote: >>> From: Rouven Czerwinski <r.czerwinski@pengutronix.de> >>> >>> Include the gencsf header to enable the secure-boot images. >>> >>> Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de> >> >> Any downside in just doing this for all i.MX8M boards? > > Thought about this too. If HABV4 is not enabled this will have no > impact. I didn't added the support for all boards since some custom > boards may don't want this. What about adding it to all EVK boards? I don't see why some boards wouldn't want this. I say, let's enable it for all. Cheers, Ahmad > > Regards, > Marco > >> Thanks, >> Ahmad >> >>> --- >>> arch/arm/boards/polyhex-debix/flash-header-polyhex-debix.imxcfg | 1 + >>> 1 file changed, 1 insertion(+) >>> >>> diff --git a/arch/arm/boards/polyhex-debix/flash-header-polyhex-debix.imxcfg b/arch/arm/boards/polyhex-debix/flash-header-polyhex-debix.imxcfg >>> index 663bd102e9a2..d619995496ac 100644 >>> --- a/arch/arm/boards/polyhex-debix/flash-header-polyhex-debix.imxcfg >>> +++ b/arch/arm/boards/polyhex-debix/flash-header-polyhex-debix.imxcfg >>> @@ -5,3 +5,4 @@ soc imx8mp >>> loadaddr 0x920000 >>> max_load_size 0x3f000 >>> ivtofs 0x0 >>> +#include <mach/imx/habv4-imx8-gencsf.h> >> >> -- >> Pengutronix e.K. | | >> Steuerwalder Str. 21 | http://www.pengutronix.de/ | >> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | >> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | >> >> > -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2023-12-20 16:01 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2023-12-20 14:54 [PATCH 1/2] ARM: boards: polyhex-debix: enable HAB support Marco Felsch 2023-12-20 14:54 ` [PATCH 2/2] ARM: boards: polyhex-debix: fix file mode for 8g-lpddr4-timing.c Marco Felsch 2023-12-20 15:44 ` [PATCH 1/2] ARM: boards: polyhex-debix: enable HAB support Ahmad Fatoum 2023-12-20 15:48 ` Marco Felsch 2023-12-20 16:00 ` Ahmad Fatoum
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox