mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH v2] mci: add new MCI_BROKEN_CD option for testing
@ 2022-07-25 11:58 Ahmad Fatoum
  2022-08-08 13:40 ` Sascha Hauer
  0 siblings, 1 reply; 5+ messages in thread
From: Ahmad Fatoum @ 2022-07-25 11:58 UTC (permalink / raw)
  To: barebox; +Cc: Ahmad Fatoum

In remote labs co-located with other hardware, we've observed card
detect levers of different boards to sporadically fail to detect
the card, e.g. because the cable on the usbsdmux was yanked around
by accident. When this happens, barebox usually boots up normally as
the card detect is ignored and then Linux waits indefinitely for
the card-detect to turn active. Add a new config option that can be
enabled to avoid these issues altogether.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
v1 -> v2:
  - use early exit instead of if-else
  - don't fail mci_card_probe if of_register_fixup fails
---
 drivers/mci/Kconfig    | 15 +++++++++++++++
 drivers/mci/mci-core.c | 36 ++++++++++++++++++++++++++++++++----
 2 files changed, 47 insertions(+), 4 deletions(-)

diff --git a/drivers/mci/Kconfig b/drivers/mci/Kconfig
index 21d53c0c3f0b..651e59259790 100644
--- a/drivers/mci/Kconfig
+++ b/drivers/mci/Kconfig
@@ -56,6 +56,21 @@ config MCI_MMC_GPP_PARTITIONS
 	  Note: by default, 'MMC' devices have no 'general purpose partitions',
 	  it requires a special one-time configuration step to enable them.
 
+config MCI_BROKEN_CD
+	bool "ignore card-detect pin on boot and in OS"
+	help
+	  Say 'y' here to have barebox unconditionally ignore the
+	  card-detect pin for its own operation and manipulate the
+	  kernel DT, so all detected MCI cards are polled instead
+	  of expecting the card detect lever to behave correctly.
+	  If you need more fine grained control use of_property
+	  in an init script:
+
+	    of_property -fd mmc0 cd-gpios
+	    of_property -fs mmc0 broken-cd
+
+	  If unsure, say 'n' here.
+
 comment "--- MCI host drivers ---"
 
 config MCI_DW
diff --git a/drivers/mci/mci-core.c b/drivers/mci/mci-core.c
index 82e2f82f5377..4db2253c3a80 100644
--- a/drivers/mci/mci-core.c
+++ b/drivers/mci/mci-core.c
@@ -1727,6 +1727,27 @@ static int mci_register_partition(struct mci_part *part)
 	return 0;
 }
 
+static int of_broken_cd_fixup(struct device_node *root, void *ctx)
+{
+	struct device_d *hw_dev = ctx;
+	struct device_node *np;
+	char *name;
+
+	name = of_get_reproducible_name(hw_dev->device_node);
+	np = of_find_node_by_reproducible_name(root, name);
+	free(name);
+	if (!np) {
+		dev_warn(hw_dev, "Cannot find nodepath %s, cannot fixup\n",
+			 hw_dev->device_node->full_name);
+		return -EINVAL;
+	}
+
+	of_property_write_bool(np, "cd-gpios", false);
+	of_property_write_bool(np, "broken-cd", true);
+
+	return 0;
+}
+
 /**
  * Probe an MCI card at the given host interface
  * @param mci MCI device instance
@@ -1737,10 +1758,13 @@ static int mci_card_probe(struct mci *mci)
 	struct mci_host *host = mci->host;
 	int i, rc, disknum, ret;
 
-	if (host->card_present && !host->card_present(host) &&
-	    !host->non_removable) {
-		dev_err(&mci->dev, "no card inserted\n");
-		return -ENODEV;
+	if (host->card_present && !host->card_present(host) && !host->non_removable) {
+		if (!IS_ENABLED(CONFIG_MCI_BROKEN_CD)) {
+			dev_err(&mci->dev, "no card inserted\n");
+			return -ENODEV;
+		}
+
+		dev_info(&mci->dev, "no card inserted (ignoring)\n");
 	}
 
 	ret = regulator_enable(host->supply);
@@ -1818,6 +1842,10 @@ static int mci_card_probe(struct mci *mci)
 		}
 	}
 
+	if (IS_ENABLED(CONFIG_MCI_BROKEN_CD) && !host->no_sd &&
+	    dev_of_node(host->hw_dev))
+		of_register_fixup(of_broken_cd_fixup, host->hw_dev);
+
 	dev_dbg(&mci->dev, "SD Card successfully added\n");
 
 on_error:
-- 
2.30.2




^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2022-09-07  8:55 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-07-25 11:58 [PATCH v2] mci: add new MCI_BROKEN_CD option for testing Ahmad Fatoum
2022-08-08 13:40 ` Sascha Hauer
2022-08-08 13:43   ` Ahmad Fatoum
2022-08-08 13:55     ` Sascha Hauer
2022-09-07  8:37       ` Ahmad Fatoum

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox