From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: Sascha Hauer <s.hauer@pengutronix.de>,
BAREBOX <barebox@lists.infradead.org>
Cc: "Claude Sonnet 4.5" <noreply@anthropic.com>
Subject: Re: [PATCH v2 06/21] riscv: implement elf_apply_relocations() for ELF relocation support
Date: Tue, 6 Jan 2026 14:11:29 +0100 [thread overview]
Message-ID: <cccb2c24-8e2c-4f5b-9a73-351ad327ae59@pengutronix.de> (raw)
In-Reply-To: <20260106-pbl-load-elf-v2-6-487bc760f045@pengutronix.de>
On 1/6/26 1:53 PM, Sascha Hauer wrote:
> Add architecture-specific ELF relocation support for RISC-V,
> enabling dynamic relocation of position-independent ELF binaries.
> The implemetation reuses the existing relocate_image().
>
> 🤖 Generated with [Claude Code](https://claude.com/claude-code)
>
> Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With below point addressed:
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> ---
> arch/riscv/lib/reloc.c | 55 ++++++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 55 insertions(+)
>
> diff --git a/arch/riscv/lib/reloc.c b/arch/riscv/lib/reloc.c
> index 18b13a7013cff4032c12b999470f265dbda13c51..9a5004cf5b762b39bb98f7f0ab112c204185b33a 100644
> --- a/arch/riscv/lib/reloc.c
> +++ b/arch/riscv/lib/reloc.c
> @@ -75,3 +75,58 @@ void relocate_to_current_adr(void)
>
> sync_caches_for_execution();
> }
> +
> +#if __riscv_xlen == 64
> +
> +/*
> + * Apply RISC-V 64-bit ELF relocations
> + */
> +int elf_apply_relocations(struct elf_image *elf, const void *dyn_seg)
> +{
> + Elf64_Rela *rela;
If you drop this and use only rel_ptr, this can be made a single
function for both platforms.
Cheers,
Ahmad
> + void *rel_ptr;
> + u64 relasz;
> + phys_addr_t base = (phys_addr_t)elf->reloc_offset;
> + int ret;
> +
> + ret = elf_parse_dynamic_section_rela(elf, dyn_seg, &rel_ptr, &relasz);
> + if (ret)
> + return ret;
> +
> + rela = (Elf64_Rela *)rel_ptr;
> +
> + relocate_image(base, rela, (void *)rela + relasz, NULL, NULL);
> +
> + return 0;
> +}
> +
> +#else /* 32-bit RISC-V */
> +
> +/*
> + * Apply RISC-V 32-bit ELF relocations
> + */
> +int elf_apply_relocations(struct elf_image *elf, const void *dyn_seg)
> +{
> + Elf32_Rela *rela;
> + void *rel_ptr;
> + u64 relasz;
> + phys_addr_t base = (phys_addr_t)elf->reloc_offset;
> + int ret;
> +
> + if (elf->class != ELFCLASS32) {
> + pr_err("Wrong ELF class for RISC-V 32 relocation\n");
> + return -EINVAL;
> + }
> +
> + ret = elf_parse_dynamic_section_rela(elf, dyn_seg, &rel_ptr, &relasz);
> + if (ret)
> + return ret;
> +
> + rela = (Elf32_Rela *)rel_ptr;
> +
> + relocate_image(base, rela, (void *)rela + relasz, NULL, NULL);
> +
> + return 0;
> +}
> +
> +#endif
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2026-01-06 13:12 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-06 12:53 [PATCH v2 00/21] PBL: Add PBL ELF loading support with dynamic relocations Sascha Hauer
2026-01-06 12:53 ` [PATCH v2 01/21] elf: only accept images matching the native ELF_CLASS Sascha Hauer
2026-01-06 12:58 ` Ahmad Fatoum
2026-01-06 12:53 ` [PATCH v2 02/21] elf: build for PBL as well Sascha Hauer
2026-01-06 13:26 ` Ahmad Fatoum
2026-01-06 12:53 ` [PATCH v2 03/21] elf: add dynamic relocation support Sascha Hauer
2026-01-06 13:51 ` Ahmad Fatoum
2026-01-06 12:53 ` [PATCH v2 04/21] ARM: implement elf_apply_relocations() for ELF " Sascha Hauer
2026-01-06 13:07 ` Ahmad Fatoum
2026-01-06 14:25 ` Ahmad Fatoum
2026-01-06 12:53 ` [PATCH v2 05/21] riscv: define generic relocate_image Sascha Hauer
2026-01-06 13:10 ` Ahmad Fatoum
2026-01-06 13:11 ` Sascha Hauer
2026-01-06 12:53 ` [PATCH v2 06/21] riscv: implement elf_apply_relocations() for ELF relocation support Sascha Hauer
2026-01-06 13:11 ` Ahmad Fatoum [this message]
2026-01-06 12:53 ` [PATCH v2 07/21] elf: implement elf_load_inplace() Sascha Hauer
2026-01-06 13:53 ` Ahmad Fatoum
2026-01-06 12:53 ` [PATCH v2 08/21] elf: create elf_open_binary_into() Sascha Hauer
2026-01-06 13:55 ` Ahmad Fatoum
2026-01-06 12:53 ` [PATCH v2 09/21] Makefile: add barebox.elf build target Sascha Hauer
2026-01-06 13:13 ` Ahmad Fatoum
2026-01-06 12:53 ` [PATCH v2 10/21] PBL: allow to link ELF image into PBL Sascha Hauer
2026-01-06 13:18 ` Ahmad Fatoum
2026-01-06 12:53 ` [PATCH v2 11/21] mmu: add MAP_CACHED_RO mapping type Sascha Hauer
2026-01-06 13:14 ` Ahmad Fatoum
2026-01-06 12:53 ` [PATCH v2 12/21] mmu: introduce pbl_remap_range() Sascha Hauer
2026-01-06 13:15 ` Ahmad Fatoum
2026-01-06 12:53 ` [PATCH v2 13/21] ARM: use relative jumps in exception table Sascha Hauer
2026-01-06 13:57 ` Ahmad Fatoum
2026-01-06 12:53 ` [PATCH v2 14/21] ARM: exceptions: make in-binary exception table const Sascha Hauer
2026-01-06 14:00 ` Ahmad Fatoum
2026-01-06 12:53 ` [PATCH v2 15/21] ARM: linker script: create separate PT_LOAD segments for text, rodata, and data Sascha Hauer
2026-01-06 14:05 ` Ahmad Fatoum
2026-01-06 12:53 ` [PATCH v2 16/21] ARM: link ELF image into PBL Sascha Hauer
2026-01-06 14:06 ` Ahmad Fatoum
2026-01-06 12:53 ` [PATCH v2 17/21] ARM: PBL: setup MMU with proper permissions from ELF segments Sascha Hauer
2026-01-06 14:10 ` Ahmad Fatoum
2026-01-06 12:53 ` [PATCH v2 18/21] riscv: link ELF image into PBL Sascha Hauer
2026-01-06 14:11 ` Ahmad Fatoum
2026-01-06 12:53 ` [PATCH v2 19/21] riscv: linker script: create separate PT_LOAD segments for text, rodata, and data Sascha Hauer
2026-01-06 14:12 ` Ahmad Fatoum
2026-01-08 15:25 ` Sascha Hauer
2026-01-06 12:53 ` [PATCH v2 20/21] riscv: Allwinner D1: Drop M-Mode Sascha Hauer
2026-01-06 13:11 ` Ahmad Fatoum
2026-01-06 12:53 ` [PATCH v2 21/21] riscv: add ELF segment-based memory protection with MMU Sascha Hauer
2026-01-06 14:20 ` Ahmad Fatoum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cccb2c24-8e2c-4f5b-9a73-351ad327ae59@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=noreply@anthropic.com \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox