From: Lucas Stach <l.stach@pengutronix.de>
To: Ahmad Fatoum <a.fatoum@pengutronix.de>, barebox@lists.infradead.org
Subject: Re: [PATCH 4/5] ARM: i.MX8MP: don't reparent GIC from BootROM default
Date: Mon, 22 Apr 2024 10:52:17 +0200 [thread overview]
Message-ID: <e1768e0703f688b5e99bab72eee95bdc58c7cb9c.camel@pengutronix.de> (raw)
In-Reply-To: <20240419061331.2592739-5-a.fatoum@pengutronix.de>
Am Freitag, dem 19.04.2024 um 08:13 +0200 schrieb Ahmad Fatoum:
> On i.MX8MP, GIC can run at up to 400 MHz in nominal drive mode and up
> to 500 MHz in overdrive mode. We currently configure unconditionally
> to 100 MHz on i.MX8MP.
>
> The BootROM default is running it on 400 MHz, which works well for us on
> the i.MX8MP, so skip the GIC configuration on the i.MX8MP.
>
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> ---
> arch/arm/mach-imx/imx8m.c | 16 +++++++++-------
> 1 file changed, 9 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arm/mach-imx/imx8m.c b/arch/arm/mach-imx/imx8m.c
> index 56330cef500c..0966f7fdf076 100644
> --- a/arch/arm/mach-imx/imx8m.c
> +++ b/arch/arm/mach-imx/imx8m.c
> @@ -100,13 +100,6 @@ static void __imx8m_early_clock_init(int cpu_type)
> INTPLL_DIV20_CLKE_MASK;
> writel(val, ana + IMX8MM_CCM_ANALOG_SYS_PLL2_GEN_CTRL);
>
> - /* config GIC to sys_pll2_100m */
> - imx8m_ccgr_clock_disable(IMX8M_CCM_CCGR_GIC);
> - imx8m_clock_set_target_val(IMX8M_GIC_CLK_ROOT,
> - IMX8M_CCM_TARGET_ROOTn_ENABLE |
> - IMX8M_CCM_TARGET_ROOTn_MUX(3));
> - imx8m_ccgr_clock_enable(IMX8M_CCM_CCGR_GIC);
> -
> if (cpu_type == IMX_CPU_IMX8MN || cpu_type == IMX_CPU_IMX8MP)
> pll3_freq = 600000000UL;
> else
> @@ -118,11 +111,20 @@ static void __imx8m_early_clock_init(int cpu_type)
>
> if (cpu_type == IMX_CPU_IMX8MP) {
> /* 8MP ROM already set NOC to 800Mhz, only need to configure NOC_IO clk to 600Mhz */
> + /* 8MP ROM already set GIC to 400Mhz, system_pll1_800m with div = 2 */
This comment change looks odd. Now it doesn't explain anymore what's
done here and why, but rather explains why the else path isn't executed
on the 8MP.
> imx8m_clock_set_target_val(IMX8M_NOC_IO_CLK_ROOT,
> IMX8M_CCM_TARGET_ROOTn_ENABLE |
> IMX8M_CCM_TARGET_ROOTn_MUX(2));
> + } else {
Maybe move this into a separate condition != IMX_CPU_IMX8MP and move
the comment above here? Leaving the comment about NOC_IO clocks
untouched?
> + /* config GIC to sys_pll2_100m */
> + imx8m_ccgr_clock_disable(IMX8M_CCM_CCGR_GIC);
> + imx8m_clock_set_target_val(IMX8M_GIC_CLK_ROOT,
> + IMX8M_CCM_TARGET_ROOTn_ENABLE |
> + IMX8M_CCM_TARGET_ROOTn_MUX(3));
> + imx8m_ccgr_clock_enable(IMX8M_CCM_CCGR_GIC);
> }
>
> +
> clrsetbits_le32(ccm + IMX8M_CCM_TARGET_ROOTn(IMX8M_ARM_A53_CLK_ROOT),
> IMX8M_CCM_TARGET_ROOTn_MUX(7),
> IMX8M_CCM_TARGET_ROOTn_MUX(2));
next prev parent reply other threads:[~2024-04-22 10:00 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-19 6:13 [PATCH 0/5] ARM: i.MX8MP: add nominal drive mode support Ahmad Fatoum
2024-04-19 6:13 ` [PATCH 1/5] ARM: i.MX8M: pass cpu_type parameter to __imx8m_early_clock_init Ahmad Fatoum
2024-04-19 6:13 ` [PATCH 2/5] ARM: i.MX8MP: configure PLL3 as 600MHz Ahmad Fatoum
2024-04-19 6:13 ` [PATCH 3/5] ARM: i.MX8MP: configure PLL3 as noc_io parent Ahmad Fatoum
2024-04-19 6:13 ` [PATCH 4/5] ARM: i.MX8MP: don't reparent GIC from BootROM default Ahmad Fatoum
2024-04-22 8:52 ` Lucas Stach [this message]
2024-04-19 6:13 ` [PATCH 5/5] ARM: dts: i.MX8MP: Add optional nominal drive mode DTSI Ahmad Fatoum
2024-04-22 8:54 ` Lucas Stach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e1768e0703f688b5e99bab72eee95bdc58c7cb9c.camel@pengutronix.de \
--to=l.stach@pengutronix.de \
--cc=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox