mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: Marco Felsch <m.felsch@pengutronix.de>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	BAREBOX <barebox@lists.infradead.org>
Subject: Re: [PATCH 05/23] ARM: i.MX8M: cosmetic cleanup
Date: Wed, 14 Jan 2026 13:04:44 +0100	[thread overview]
Message-ID: <e4fad2fe-3378-4c22-8afc-97d89b7330b7@pengutronix.de> (raw)
In-Reply-To: <20251110-v2025-09-0-topic-optee-of-handling-v1-5-8f0625ac5471@pengutronix.de>



On 11/10/25 9:34 PM, Marco Felsch wrote:
> Rename the local imx8m_atf_start_bl31() to imx8m_tfa_start_bl31() since
> the official naming is Trusted-Firmware A (TF-A) and not ARM Trusted
> Firmware which was the former name.
> 
> While on it rename the parameters to make it clear what firmware
> component is passed and align the function documentation with the
> reality.
> 
> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>

Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>

I split out this patch in a series that I just sent.

Cheers,
Ahmad

> ---
>  arch/arm/mach-imx/atf.c | 27 +++++++++++++--------------
>  1 file changed, 13 insertions(+), 14 deletions(-)
> 
> diff --git a/arch/arm/mach-imx/atf.c b/arch/arm/mach-imx/atf.c
> index 42ab9e9a23e433c50a1df1739d0163049174e6a6..dd861f1ad87c98c8baffa2986aeef40eacedc88c 100644
> --- a/arch/arm/mach-imx/atf.c
> +++ b/arch/arm/mach-imx/atf.c
> @@ -19,11 +19,11 @@
>  #include <mach/imx/xload.h>
>  
>  /**
> - * imx8m_atf_load_bl31 - Load ATF BL31 blob and transfer control to it
> + * imx8m_tfa_start_bl31 - Load TF-A BL31 blob and transfer control to it
>   *
> - * @fw:		Pointer to the BL31 blob
> - * @fw_size:	Size of the BL31 blob
> - * @atf_dest:	Place where the BL31 is copied to and executed
> + * @tfa:	Pointer to the BL31 blob
> + * @tfa_size:	Size of the BL31 blob
> + * @tfa_dest:	Place where the BL31 is copied to and executed
>   *
>   * This function:
>   *
> @@ -37,12 +37,12 @@
>   *     3. Transfers control to BL31
>   */
>  
> -static __noreturn void imx8m_atf_start_bl31(const void *fw, size_t fw_size, void *atf_dest)
> +static __noreturn void imx8m_tfa_start_bl31(const void *tfa_bin, size_t tfa_size, void *tfa_dest)
>  {
> -	void __noreturn (*bl31)(void) = atf_dest;
> +	void __noreturn (*bl31)(void) = tfa_dest;
>  	int ret;
>  
> -	BUG_ON(fw_size > MX8M_ATF_BL31_SIZE_LIMIT);
> +	BUG_ON(tfa_size > MX8M_ATF_BL31_SIZE_LIMIT);
>  
>  	if (IS_ENABLED(CONFIG_FSL_CAAM_RNG_PBL_INIT)) {
>  		ret = imx_early_caam_init(MX8M_CAAM_BASE_ADDR);
> @@ -52,10 +52,10 @@ static __noreturn void imx8m_atf_start_bl31(const void *fw, size_t fw_size, void
>  			pr_debug("CAAM early init successful\n");
>  	}
>  
> -	memcpy(bl31, fw, fw_size);
> +	memcpy(bl31, tfa_bin, tfa_size);
>  
>  	asm volatile("msr sp_el2, %0" : :
> -		     "r" (atf_dest - 16) :
> +		     "r" (tfa_dest - 16) :
>  		     "cc");
>  	bl31();
>  	__builtin_unreachable();
> @@ -176,7 +176,7 @@ __noreturn void __imx8mm_load_and_start_image_via_tfa(void *fdt, void *bl33)
>  		get_builtin_firmware(imx8mm_bl31_bin, &bl31, &bl31_size);
>  	}
>  
> -	imx8m_atf_start_bl31(bl31, bl31_size, (void *)MX8MM_ATF_BL31_BASE_ADDR);
> +	imx8m_tfa_start_bl31(bl31, bl31_size, (void *)MX8MM_ATF_BL31_BASE_ADDR);
>  }
>  
>  void imx8mp_load_bl33(void *bl33)
> @@ -250,10 +250,9 @@ __noreturn void __imx8mp_load_and_start_image_via_tfa(void *fdt, void *bl33)
>  		get_builtin_firmware(imx8mp_bl31_bin, &bl31, &bl31_size);
>  	}
>  
> -	imx8m_atf_start_bl31(bl31, bl31_size, (void *)MX8MP_ATF_BL31_BASE_ADDR);
> +	imx8m_tfa_start_bl31(bl31, bl31_size, (void *)MX8MP_ATF_BL31_BASE_ADDR);
>  }
>  
> -
>  void imx8mn_load_bl33(void *bl33)
>  {
>  	enum bootsource src;
> @@ -325,7 +324,7 @@ __noreturn void __imx8mn_load_and_start_image_via_tfa(void *fdt, void *bl33)
>  		get_builtin_firmware(imx8mn_bl31_bin, &bl31, &bl31_size);
>  	}
>  
> -	imx8m_atf_start_bl31(bl31, bl31_size, (void *)MX8MN_ATF_BL31_BASE_ADDR);
> +	imx8m_tfa_start_bl31(bl31, bl31_size, (void *)MX8MN_ATF_BL31_BASE_ADDR);
>  }
>  
>  void imx8mq_load_bl33(void *bl33)
> @@ -393,7 +392,7 @@ __noreturn void __imx8mq_load_and_start_image_via_tfa(void *fdt, void *bl33)
>  		get_builtin_firmware(imx8mq_bl31_bin, &bl31, &bl31_size);
>  	}
>  
> -	imx8m_atf_start_bl31(bl31, bl31_size, (void *)MX8MQ_ATF_BL31_BASE_ADDR);
> +	imx8m_tfa_start_bl31(bl31, bl31_size, (void *)MX8MQ_ATF_BL31_BASE_ADDR);
>  }
>  
>  void __noreturn imx93_load_and_start_image_via_tfa(void)
> 

-- 
Pengutronix e.K.                  |                             |
Steuerwalder Str. 21              | http://www.pengutronix.de/  |
31137 Hildesheim, Germany         | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686  | Fax:   +49-5121-206917-5555 |




  reply	other threads:[~2026-01-14 12:05 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-11-10 20:34 [PATCH 00/23] Improve OP-TEE handling Marco Felsch
2025-11-10 20:34 ` [PATCH 01/23] pbl: compressed-dtb: add missing includes Marco Felsch
2026-01-14 12:03   ` Ahmad Fatoum
2025-11-10 20:34 ` [PATCH 02/23] pbl: fdt: fix fdt_fixup_mem error handling Marco Felsch
2026-01-14 12:04   ` Ahmad Fatoum
2025-11-10 20:34 ` [PATCH 03/23] ARM: atf: add missing includes in atf_common.h Marco Felsch
2026-01-14 12:04   ` Ahmad Fatoum
2025-11-10 20:34 ` [PATCH 04/23] ARM: i.MX8M: add support to pass DT via imx8m{m,n,q,p}_load_and_start_image_via_tfa() Marco Felsch
2026-01-14 12:14   ` Ahmad Fatoum
2025-11-10 20:34 ` [PATCH 05/23] ARM: i.MX8M: cosmetic cleanup Marco Felsch
2026-01-14 12:04   ` Ahmad Fatoum [this message]
2025-11-10 20:34 ` [PATCH 06/23] ARM: i.MX8M: move BL32 setup into imx8m_tfa_start_bl31() Marco Felsch
2026-01-14 12:21   ` Ahmad Fatoum
2025-11-10 20:34 ` [PATCH 07/23] ARM: i.MX8M: imx8m_tfa_start_bl31() add support for bl33 and fdt Marco Felsch
2026-01-14 12:25   ` Ahmad Fatoum
2025-11-10 20:34 ` [PATCH 08/23] pbl: decomp: add pbl_dtbz_uncompress helper Marco Felsch
2026-01-14 12:28   ` Ahmad Fatoum
2025-11-10 20:34 ` [PATCH 09/23] pbl: fdt: add pbl_load_fdt helper Marco Felsch
2025-11-10 20:34 ` [PATCH 10/23] ARM: i.MX: scratch: add FDT support Marco Felsch
2025-11-11 14:14   ` Sascha Hauer
2025-11-11 14:30     ` Ahmad Fatoum
2025-11-11 15:06       ` Marco Felsch
2025-11-10 20:34 ` [PATCH 11/23] ARM: i.MX8M: esdctl: drop ddrc base from imx8m_ddrc_sdram_size Marco Felsch
2025-11-10 20:34 ` [PATCH 12/23] ARM: i.MX8M: esdctl: export imx8m_ddrc_sdram_size() Marco Felsch
2025-11-10 20:34 ` [PATCH 13/23] ARM: i.MX8M: add support to pass BL3x bl_params Marco Felsch
2025-11-10 20:34 ` [PATCH 14/23] ARM: i.MX: scratch: add OP-TEE FDTO support Marco Felsch
2025-11-10 20:34 ` [PATCH 15/23] pbl: string: add strncmp Marco Felsch
2026-01-14 12:05   ` Ahmad Fatoum
2025-11-10 20:34 ` [PATCH 16/23] pbl: fdt: add fdt_copy_node helper Marco Felsch
2025-11-10 20:34 ` [PATCH 17/23] handoff-data: Add BL32_DT_OVL entry Marco Felsch
2025-11-10 20:34 ` [PATCH 18/23] security: optee: add optee_extract_fdto helper Marco Felsch
2025-11-10 20:34 ` [PATCH 19/23] security: optee: add helpers to apply OP-TEE FDTO Marco Felsch
2025-11-10 20:35 ` [PATCH 20/23] ARM: i.MX8M: Add support to extract OP-TEE provided informations Marco Felsch
2025-11-17  9:15   ` Sascha Hauer
2025-11-10 20:35 ` [PATCH 21/23] of: base: register optional OP-TEE overlay Marco Felsch
2025-11-10 20:35 ` [PATCH 22/23] pbl: add support to disable/remove the /secure-chosen/stdout-path Marco Felsch
2026-01-14 13:17   ` Ahmad Fatoum
2025-11-10 20:35 ` [PATCH 23/23] ARM: i.MX8M: remove /secure-chosen/stdout-path if requested Marco Felsch

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e4fad2fe-3378-4c22-8afc-97d89b7330b7@pengutronix.de \
    --to=a.fatoum@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=m.felsch@pengutronix.de \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox