From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1jg3tj-0002dX-OJ for barebox@lists.infradead.org; Tue, 02 Jun 2020 10:11:57 +0000 References: <00a601d638be$2f10f330$8d32d990$@mobius-embedded-systems.co.uk> <00e501d638c4$438feea0$caafcbe0$@mobius-embedded-systems.co.uk> From: Ahmad Fatoum Message-ID: Date: Tue, 2 Jun 2020 12:11:53 +0200 MIME-Version: 1.0 In-Reply-To: <00e501d638c4$438feea0$caafcbe0$@mobius-embedded-systems.co.uk> Content-Language: en-US List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: Mini UART support for Raspberry Pi CM3 ? To: "john@mobius-embedded-systems.co.uk" , barebox@lists.infradead.org On 6/2/20 11:57 AM, john@mobius-embedded-systems.co.uk wrote: > Hi Ahmad > > I have been using v2020.05 but I believe I had enabled all consoles so I'll > try setting it to none and see how that goes. This will only fix the use of UART0 as output. To use UART1, you'll need to set stdout-path = &uart1 like ab76f9d09d3b ("ARM: rpi: choose miniuart as stdout") does. Cheers Ahmad > > Thanks > > John > > -----Original Message----- > From: barebox On Behalf Of Ahmad > Fatoum > Sent: 02 June 2020 10:55 > To: john@mobius-embedded-systems.co.uk > ; barebox@lists.infradead.org > Subject: Re: Mini UART support for Raspberry Pi CM3 ? > > On 6/2/20 11:43 AM, Ahmad Fatoum wrote: >> On 6/2/20 11:14 AM, john@mobius-embedded-systems.co.uk wrote: >>> Hi >>> >>> I have been trying to get the mini UART (UART1) to work in Barebox on >>> the RPI Compute Module 3+. I already have the changes made in >>> config.txt and this works fine when I boot into the main Linux code. >>> However, in Barebox, the output always comes out on the main UART >>> (UART0) and that is wired to the Bluetooth module on my platform. I have > tried modifying the device >>> trees and cannot seem to get any output. I also ensured that I added > the >>> RPI CM3 output target as a config in rpi_defconfig. >>> >>> I've tried turning off the PL011 config option and also changing the >>> device tree to reference UART1 and set the chosen stdout-path to >>> point to this UART, but when I do this I just get a lack of any serial > output. >>> >>> I am also wanting to use the alternate pins (32 & 33) for UART1, so I >>> am thinking that something else needs to be changed. Has anyone >>> managed to get this to work? >> >> Which barebox version are you on? v2020.03.0 contains a series for >> mini UART support culminating in ab76f9d09d3b ("ARM: rpi: choose >> miniuart as stdout"), which sounds like something you will want to have. > > Oh, I see now that this is in since v2019.03.0. I assume you are already on > a newer version? > >> Also what's you "Console activation strategy"? (Kconfig symbols >> CONSOLE_ACTIVATE_.*) You'll want to have CONSOLE_ACTIVATE_NONE, so >> only the stdout-path from the device tree is activated by default. >> >> Cheers >> Ahmad >> >>> >>> Regards >>> >>> John >>> >>> >>> _______________________________________________ >>> barebox mailing list >>> barebox@lists.infradead.org >>> http://lists.infradead.org/mailman/listinfo/barebox >>> >> > -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox