From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: Marco Felsch <m.felsch@pengutronix.de>, barebox@lists.infradead.org
Subject: Re: [PATCH] pmdomain: imx8mp-blk-ctrl: fix adb handshake handling
Date: Wed, 3 Apr 2024 18:03:51 +0200 [thread overview]
Message-ID: <ef88c9c8-3c00-408c-a6a0-fb5199282218@pengutronix.de> (raw)
In-Reply-To: <20240403153151.2859387-1-m.felsch@pengutronix.de>
Hello Marco,
On 03.04.24 17:31, Marco Felsch wrote:
> Fix powering the DWC3 USB subsystem which is part of the HSIO BLKCTRL.
> Currently we enable the USB clocks and the USB module clock within the
> HSIO BLKCTRL. The later get stuck during the first call of
> imx8mp_blk_ctrl_power_on() since the parent GPCv2 device is not powered
> yet.
>
> Fix this by porting the Linux imx8mp_blk_ctrl::power_nb notifier_block
> logic. The Linux driver enable/disable the USB module to propagate the
> ADB handshake instead of powering it permanently. The logic is executed
> after the parent GPCv2 power domain is powered so we can access the HSIO
> BLKCTRL registers.
>
> Fixes: 5cb41f0b62dc ("pmdomain: imx: add i.MX8MP HSIO blk-ctrl driver")
> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Given that we currently never disable power domains, this looks ok:
Acked-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Thanks for the fix. This should go into master.
Cheers,
Ahmad
> ---
> drivers/pmdomain/imx/imx8mp-blk-ctrl.c | 28 ++++++++++++++++++++------
> 1 file changed, 22 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/pmdomain/imx/imx8mp-blk-ctrl.c b/drivers/pmdomain/imx/imx8mp-blk-ctrl.c
> index 38de9d88a139..b71a4a793761 100644
> --- a/drivers/pmdomain/imx/imx8mp-blk-ctrl.c
> +++ b/drivers/pmdomain/imx/imx8mp-blk-ctrl.c
> @@ -192,20 +192,34 @@ static void imx8mp_hsio_blk_ctrl_power_off(struct imx8mp_blk_ctrl *bc,
> }
> }
>
> -static int imx8mp_hsio_enable_usb_clk(struct imx8mp_blk_ctrl *bc)
> +static int imx8mp_hsio_propagate_adb_handshake(struct imx8mp_blk_ctrl *bc)
> {
> int ret;
> struct clk_bulk_data *usb_clk = bc->domains[IMX8MP_HSIOBLK_PD_USB].clks;
> int num_clks = bc->domains[IMX8MP_HSIOBLK_PD_USB].data->num_clks;
> + static int once;
>
> + if (once)
> + return 0;
> +
> + /*
> + * enable USB clock for a moment for the power-on ADB handshake
> + * to proceed
> + */
> ret = clk_bulk_prepare_enable(num_clks, usb_clk);
> if (ret)
> return ret;
>
> regmap_set_bits(bc->regmap, GPR_REG0, USB_CLOCK_MODULE_EN);
>
> - return 0;
> + udelay(5);
> +
> + regmap_clear_bits(bc->regmap, GPR_REG0, USB_CLOCK_MODULE_EN);
> + clk_bulk_disable_unprepare(num_clks, usb_clk);
>
> + once++;
> +
> + return 0;
> }
>
> static const struct imx8mp_blk_ctrl_domain_data imx8mp_hsio_domain_data[] = {
> @@ -251,10 +265,6 @@ static int imx8mp_blk_ctrl_power_on(struct generic_pm_domain *genpd)
> struct imx8mp_blk_ctrl *bc = domain->bc;
> int ret;
>
> - ret = imx8mp_hsio_enable_usb_clk(bc);
> - if (ret)
> - return ret;
> -
> /* make sure bus domain is awake */
> ret = pm_runtime_resume_and_get_genpd(bc->bus_power_dev);
> if (ret < 0) {
> @@ -262,6 +272,12 @@ static int imx8mp_blk_ctrl_power_on(struct generic_pm_domain *genpd)
> return ret;
> }
>
> + ret = imx8mp_hsio_propagate_adb_handshake(bc);
> + if (ret) {
> + dev_err(bc->dev, "failed to propagate adb handshake\n");
> + goto bus_put;
> + }
> +
> /* enable upstream clocks */
> ret = clk_bulk_prepare_enable(data->num_clks, domain->clks);
> if (ret) {
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2024-04-03 16:04 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-03 15:31 Marco Felsch
2024-04-03 16:03 ` Ahmad Fatoum [this message]
2024-04-04 13:41 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ef88c9c8-3c00-408c-a6a0-fb5199282218@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=m.felsch@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox