From mboxrd@z Thu Jan 1 00:00:00 1970 Delivery-date: Tue, 13 Jun 2023 14:52:28 +0200 Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by lore.white.stw.pengutronix.de with esmtps (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.94.2) (envelope-from ) id 1q93Vd-005DHU-Ih for lore@lore.pengutronix.de; Tue, 13 Jun 2023 14:52:28 +0200 Received: from bombadil.infradead.org ([2607:7c80:54:3::133]) by metis.ext.pengutronix.de with esmtps (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1q93Va-0000DX-RQ for lore@pengutronix.de; Tue, 13 Jun 2023 14:52:27 +0200 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender:List-Subscribe:List-Help :List-Post:List-Archive:List-Unsubscribe:List-Id:Content-Transfer-Encoding: Content-Type:In-Reply-To:From:References:To:Subject:MIME-Version:Date: Message-ID:Reply-To:Cc:Content-ID:Content-Description:Resent-Date:Resent-From :Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=C4A5FVh8GIe6Hnapq8irz0wm9qHbThc1NRlmGuccR2I=; b=waHnuHGzJgqsvA29CeBJ7mqwwU 1KOoWyRUWU18ycs5/rAVIRHOr3viiJi6JBN01I8+X1SdLVldzNnw8K/7b4pRh97ya3XbRG0wbDLhy 4S0nOiRdFKK+XT8kg62Yq4v4AfX+gNaCHuOs0A7yETF5LJRcZQtNBMGXXa6ztwRKrcm8l5W+PbHjD F3BHFufmWVS09Fbt7mMCPp8nBwFqLt95hy1UMXC7X7OwW/OuvciqJlcoAVFTeZ62FWt8yOG79f0a3 0X1GGHROeJF1zMctJlo/yK6VVpMEa4KqHm5BwZoOFGm5PawiEk1A/YDqP+WnQHMnHzmqQyeY0F1mV xiviwlWA==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.96 #2 (Red Hat Linux)) id 1q93UD-0085v2-2x; Tue, 13 Jun 2023 12:51:01 +0000 Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.96 #2 (Red Hat Linux)) id 1q93U9-0085sr-3A for barebox@lists.infradead.org; Tue, 13 Jun 2023 12:51:00 +0000 Received: from ptz.office.stw.pengutronix.de ([2a0a:edc0:0:900:1d::77] helo=[127.0.0.1]) by metis.ext.pengutronix.de with esmtp (Exim 4.92) (envelope-from ) id 1q93U3-0008Vs-9t; Tue, 13 Jun 2023 14:50:51 +0200 Message-ID: Date: Tue, 13 Jun 2023 14:50:50 +0200 MIME-Version: 1.0 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101 Thunderbird/102.11.2 Content-Language: en-US To: Lior Weintraub , Ahmad Fatoum , "barebox@lists.infradead.org" References: <3340583d-12cd-1a52-4c9c-d237c58bfca7@pengutronix.de> <98480243-c1b7-a2bb-9267-2126797f52bd@pengutronix.de> <381bd0cc-26b3-ad2e-1857-436932549934@pengutronix.de> <15f8d795-f486-1914-9eba-e5a315bf2083@pengutronix.de> From: Ahmad Fatoum In-Reply-To: Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20230613_055058_198553_9C65CC43 X-CRM114-Status: GOOD ( 35.43 ) X-BeenThere: barebox@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "barebox" X-SA-Exim-Connect-IP: 2607:7c80:54:3::133 X-SA-Exim-Mail-From: barebox-bounces+lore=pengutronix.de@lists.infradead.org X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on metis.ext.pengutronix.de X-Spam-Level: X-Spam-Status: No, score=-4.9 required=4.0 tests=AWL,BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,HEADER_FROM_DIFFERENT_DOMAINS, MAILING_LIST_MULTI,NICE_REPLY_A,RCVD_IN_DNSWL_MED,SPF_HELO_NONE, SPF_NONE,T_SCC_BODY_TEXT_LINE autolearn=unavailable autolearn_force=no version=3.4.2 Subject: Re: [PATCH v2] Porting barebox to a new SoC X-SA-Exim-Version: 4.2.1 (built Wed, 08 May 2019 21:11:16 +0000) X-SA-Exim-Scanned: Yes (on metis.ext.pengutronix.de) On 13.06.23 14:39, Lior Weintraub wrote: > Hi Ahmad, > > As usual, your comments are spot on :-) > > After fixing the DT, devinfo command shows correct flash node: > `-- 20000000.flash@0.of > `-- mtdrom0 > `-- 0x00000000-0x0fffffff ( 256 MiB): /dev/mtdrom0 > `-- mtdrom0.kernel > `-- 0x00000000-0x00ff7fff ( 16 MiB): /dev/mtdrom0.kernel > `-- mtdrom0.oftree > `-- 0x00000000-0x00007fff ( 32 KiB): /dev/mtdrom0.oftree > `-- mtdrom0.rootfs > `-- 0x00000000-0x007fffff ( 8 MiB): /dev/mtdrom0.rootfs > > As can be seen above, we chose to map this "flash" node on DRAM address 0x20000000 (offset 512MB). > The BL1 code correctly copy the 3 artifacts into those location (verified the content via "md -l -s /dev/mtdrom0.kernel"). > Running "drvinfo" shows: > mtdram > 20000000.flash@0.of > > Now when I try to run "bootm -o /dev/mtdrom0.oftree -r /dev/mtdrom0.rootfs /dev/mtdrom0.kernel" I am getting this error: > > barebox:/ bootm -o /dev/mtdrom0.oftree -r /dev/mtdrom0.rootfs /dev/mtdrom0.kernel > getopt: optindex: 1 nonopts: 0 optind: 1 > getopt: optindex: 1 nonopts: 0 optind: 3 > getopt: optindex: 1 nonopts: 0 optind: 5 > mtdrom0.kernel: read ofs: 0x00000000 count: 0x00001000 > > Loading ARM aarch64 Linux image '/dev/mtdrom0.kernel' > header 00000000: 4d 5a 40 fa 3f 1a 23 14 00 00 00 00 00 00 00 00 MZ@.?.#......... > header 00000010: 00 00 b3 00 00 00 00 00 0a 00 00 00 00 00 00 00 ................ > header 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ > header 00000030: 00 00 00 00 00 00 00 00 41 52 4d 64 40 00 00 00 ........ARMd@... > header 00000040: 50 45 00 00 64 aa 02 00 00 00 00 00 00 00 00 00 PE..d........... > booti: Kernel to be loaded to 8000000+b30000 Kernel image is relocatable and ARM64 header in hexdump says that load offset is zero. Yet, barebox wants to load your image to 8000000, which is already reserved. What's the output of the iomem command before and after the failed boot attempt? > __request_region ok: 0x08000000:0x0801ffff flags=0x200 > mtdrom0.kernel: read ofs: 0x00000000 count: 0x00020000 > __request_region ok: 0x08000000:0x0803ffff flags=0x200 > mtdrom0.kernel: read ofs: 0x00020000 count: 0x00020000 > . > . > mtdrom0.kernel: read ofs: 0x00fe0000 count: 0x00018000 > __request_region ok: 0x08000000:0x08ff7fff flags=0x200 > mtdrom0.rootfs: read ofs: 0x00000000 count: 0x00000800 > __request_region: 0x08b30000:0x08b4ffff (image) conflicts with 0x08000000:0x08ff7fff (image) > unable to request SDRAM 0x08b30000-0x08b4ffff > handler failed with: Out of memory Just to be sure: You don't set global.bootm.image.loadaddr, right? Cheers, Ahmad > > Appreciate your advice, > Cheers, > Lior. > > >> -----Original Message----- >> From: Ahmad Fatoum >> Sent: Monday, June 12, 2023 6:08 PM >> To: Lior Weintraub ; Ahmad Fatoum ; >> barebox@lists.infradead.org >> Subject: Re: [PATCH v2] Porting barebox to a new SoC >> >> CAUTION: External Sender >> >> Hi, >> >> On 12.06.23 16:59, Lior Weintraub wrote: >>> Hello Ahmad, >>> >>> Just for simple simulations we make the ROM size 192MB so it can include all >> needed artifacts. >> >> I am not convinced that this is much of a simplification over having >> your Qemu machine provide cfi-flash. >> >>> When we get this simple system to work we will move the relevant parts to >> BL2. >> >> Ok. >> >>> DRAM is also simulated now as SRAM so we are not worried about >> initializations. >>> >>> So if I understand correctly, we can decide that address 0x10000000 will be >> reserved for "flash" and add the following node: >>> flash@0 { >> >> flash@10000000, but that's just for informational purposes. >> >>> compatible = "mtd-rom"; >>> probe-type = "map_rom"; >>> reg = <0x10000000 0x10000000>; >>> bank-width = <4>; >>> device-width = <1>; >>> >>> #address-cells = <1>; >>> #size-cells = <1>; >>> kernel@0 { >>> label = "kernel"; >>> reg = <0x0 0x01000000>; >>> }; >>> rootfs@1000000 { >>> label = "rootfs"; >>> reg = <0x01000000 0x00800000>; >>> }; >>> }; >>> >>> When I use this node on our DT I see the following devinfo: >>> barebox:/ devinfo >>> `-- global >>> `-- nv >>> `-- platform >>> `-- machine >>> `-- psci.of >>> `-- 1000000010000000.flash@0.of >> >> As you can see the address is wrong. That's because you have >> #address-cells = <2>; >> #size-cells = <2>; >> >> Yet, you wrote reg as if it was <1>/<1>. Change it to >> >> reg = <0x0 0x10000000 0x0 0x10000000>; >> >> Remember all device tree integers are 32-bit big endian. >> >>> `-- soc.of >>> `-- c000000000.sram@c000000000.of >>> `-- soc:pmu.of >>> `-- soc:timer.of >>> `-- e000000000.interrupt-controller@E000000000.of >>> `-- mem0 >>> `-- 0x00000000-0x0fffffff ( 256 MiB): /dev/ram0 >>> `-- mem1 >>> `-- 0x00000000-0xffffffffffffffff ( 0 Bytes): /dev/mem >>> `-- amba >>> `-- d000307000.serial@d000307000.of >>> `-- cs0 >>> `-- 0x00000000-0xffffffffffffffff ( 0 Bytes): /dev/cs0 >>> `-- spi >>> `-- fs >>> `-- ramfs0 >>> `-- devfs0 >>> `-- pstore0 >>> >>> Not sure how to proceed from here... >> >> Type drvinfo command to see what drivers are bound to what devices. >> If you see no driver bound to your flash device, then maybe you need >> to enable the correct driver, that would be CONFIG_MTD_MTDRAM (which >> handles both read-only and read-write memory mapped MTD). >> >> Cheers, >> Ahmad >> >>> Cheers, >>> Lior. >>> >>>> -----Original Message----- >>>> From: Ahmad Fatoum >>>> Sent: Monday, June 12, 2023 3:29 PM >>>> To: Lior Weintraub ; Ahmad Fatoum ; >>>> barebox@lists.infradead.org >>>> Subject: Re: [PATCH v2] Porting barebox to a new SoC >>>> >>>> CAUTION: External Sender >>>> >>>> Hello Lior, >>>> >>>> On 12.06.23 11:27, Lior Weintraub wrote: >>>>> Hi Ahmad, >>>>> >>>>> Regarding the rootfs and Linux run question: >>>>> Our board doesn't include eMMC\SD card. >>>>> We only have our NOR Flash to store the binaries and our BL1 code will >> make >>>> sure to copy those blobs into DRAM. >>>> >>>> How could BL1 copy artifacts in DRAM when BL2 first needs to set up >> DRAM? >>>> >>>>> The use of QEMU needs to be as simple as possible so no hidden virtio >>>> drivers and such because we would like to simulate the real HW flow. >>>> >>>> cfi-flash is just memory-mapped flash, which is the next simplest thing >>>> after BL1 copies stuff into (limited-to-4M) on-chip SRAM. >>>> >>>>> Our DTS file now includes the GIC, timer and arm,psci-1.0. >>>>> We have an initial build of Linux kernel Image (using buildroot) and a >>>> rootfs.cpio.xz. >>>>> I assume we can somehow reserve a portion of the DRAM to store those >>>> binaries and let barebox boot this Linux. >>>> >>>> You can make this work, but this is not how your actual system will >>>> look like and trying to make this work is harder than it needs to be. >>>> >>>> Just add a cfi-flash that corresponds to the Linux/rootfs flash in >>>> your actual system, then boot with bootm (type help bootm for info >>>> on how to use it). You don't need to hardcode the load addresses, >>>> barebox will determine them automatically. >>>> >>>>> Can you please advise how to make it work? >>>> >>>> For completion's sake, if you have 64M of RAM that's preloaded with >>>> boot images: >>>> >>>> - Remove the 64M from the barebox /memory node. You can use a >> different >>>> DT for kernel, but if you have memory that barebox shouldn't override, >>>> you need to tell it that. >>>> >>>> - Add a mtd-rom node that describes these 64M that you have. You can >>>> add partitions for the region used for kernel and oftree >>>> >>>> - boot with bootm -o /dev/mtdrom0.oftree -r /dev/mtdrom0.initrd \ >>>> /dev/mtdrom0.kernel >>>> >>>> That's admittedly cumbersome, but necessary, so barebox knows what >>>> memory >>>> it may use for itself and what memory may be used for boot. >>>> >>>> Correct solution is to use cfi-flash or similar. >>>> >>>> Cheers, >>>> Ahmad >>>> -- >>>> Pengutronix e.K. | | >>>> Steuerwalder Str. 21 | http://www.pengutronix.de/ | >>>> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | >>>> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | >>> >> >> -- >> Pengutronix e.K. | | >> Steuerwalder Str. 21 | http://www.pengutronix.de/ | >> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | >> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | > -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |