[PATCH] Added documentation for the Zynq 7000

[PATCH] Added documentation for the Zynq 7000

[Johannes Roith]

Added documentation and build instructions for the Zynq 7000 and the
Avnet Zedboard.

Signed-off-by: Johannes Roith <johannes@gnu-linux.rocks>
---
 Documentation/boards/zynq.rst | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)
 create mode 100644 Documentation/boards/zynq.rst

diff --git a/Documentation/boards/zynq.rst b/Documentation/boards/zynq.rst
new file mode 100644
index 0000000000..b7aaf3892c
--- /dev/null
+++ b/Documentation/boards/zynq.rst
@@ -0,0 +1,25 @@
+Xilinx Zynq 7000
+================
+
+Barebox has support for the Xilinx Zynq 7000.
+
+Image creation
+--------------
+
+The Zynq defconfig supports the Avnet ZedBoard. Use it to build the Barebox image::
+
+   make ARCH=arm zynq_defconfig
+   make ARCH=arm
+
+Create a FAT partition as the first partition of the SD card and copy the
+produced image ``images/barebox-avnet-zedboard.img`` into this partition.
+Rename the image to ``BOOT.bin`` which is the name the Primary Bootloader of the
+Zynq 7000 expects for the next stage.
+
+Bitstream loading
+-----------------
+
+The Zynq 7000 features an ARM Cortex-A9 processor (Processing System, PS)
+alongside a Programmable Logic (PL) component that functions as an FPGA. Barebox
+provides support for loading a bitstream into the PL through its firmware
+interface.
-- 
2.34.1

Re: [PATCH] Added documentation for the Zynq 7000

[Ahmad Fatoum]

On 04.07.25 21:26, Johannes Roith wrote:
> Added documentation and build instructions for the Zynq 7000 and the
> Avnet Zedboard.
> 
> Signed-off-by: Johannes Roith <johannes@gnu-linux.rocks>

Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>

Thank you!
Ahmad

> ---
>  Documentation/boards/zynq.rst | 25 +++++++++++++++++++++++++
>  1 file changed, 25 insertions(+)
>  create mode 100644 Documentation/boards/zynq.rst
> 
> diff --git a/Documentation/boards/zynq.rst b/Documentation/boards/zynq.rst
> new file mode 100644
> index 0000000000..b7aaf3892c
> --- /dev/null
> +++ b/Documentation/boards/zynq.rst
> @@ -0,0 +1,25 @@
> +Xilinx Zynq 7000
> +================
> +
> +Barebox has support for the Xilinx Zynq 7000.
> +
> +Image creation
> +--------------
> +
> +The Zynq defconfig supports the Avnet ZedBoard. Use it to build the Barebox image::
> +
> +   make ARCH=arm zynq_defconfig
> +   make ARCH=arm
> +
> +Create a FAT partition as the first partition of the SD card and copy the
> +produced image ``images/barebox-avnet-zedboard.img`` into this partition.
> +Rename the image to ``BOOT.bin`` which is the name the Primary Bootloader of the
> +Zynq 7000 expects for the next stage.
> +
> +Bitstream loading
> +-----------------
> +
> +The Zynq 7000 features an ARM Cortex-A9 processor (Processing System, PS)
> +alongside a Programmable Logic (PL) component that functions as an FPGA. Barebox
> +provides support for loading a bitstream into the PL through its firmware
> +interface.


-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |