mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: Roland Hieber <rhi@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v2 02/16] ARM: at91: import at91bootstrap's at91_ddrsdrc.h
Date: Tue, 26 Feb 2019 10:04:26 +0100	[thread overview]
Message-ID: <fb8ebfa4-f57f-26ba-75b6-0b4db5c98da6@pengutronix.de> (raw)
In-Reply-To: <20190222133321.qloawb77lpajixcd@pengutronix.de>

Hello,

On 22/2/19 14:33, Roland Hieber wrote:
> On Tue, Feb 19, 2019 at 06:21:36PM +0100, Ahmad Fatoum wrote:
>> Instead of adding missing definitions to the existing at91sam9_ddrsdr.h
>> and adapting the incoming DDRAM initialization code from at91bootstrap,
>> just replace the lightly used existing header with this one.
>>
>> For easier comprehension, the replacement is done in three steps:
>> Here the header is imported.
> 
> Could you please add a note where it is imported from?

will add the full URL in v3.

> 
>  - Roland
> 
>>
>> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
>> ---
>>  .../arm/mach-at91/include/mach/at91_ddrsdrc.h | 288 ++++++++++++++++++
>>  1 file changed, 288 insertions(+)
>>  create mode 100644 arch/arm/mach-at91/include/mach/at91_ddrsdrc.h
>>
>> diff --git a/arch/arm/mach-at91/include/mach/at91_ddrsdrc.h b/arch/arm/mach-at91/include/mach/at91_ddrsdrc.h
>> new file mode 100644
>> index 000000000000..57d0d8f489c4
>> --- /dev/null
>> +++ b/arch/arm/mach-at91/include/mach/at91_ddrsdrc.h
>> @@ -0,0 +1,288 @@
>> +// SPDX-License-Identifier: BSD-1-Clause
>> +/*
>> + * Copyright (c) 2006, Atmel Corporation
>> + */
>> +#ifndef __AT91_DDRSDRC_H__
>> +#define __AT91_DDRSDRC_H__
>> +
>> +/**** Register offset in AT91S_HDDRSDRC2 structure ***/
>> +#define AT91C_HDDRSDRC2_MR		0x00	/* Mode Register */
>> +#define AT91C_HDDRSDRC2_RTR		0x04	/* Refresh Timer Register */
>> +#define AT91C_HDDRSDRC2_CR		0x08	/* Configuration Register */
>> +#define AT91C_HDDRSDRC2_T0PR		0x0C	/* Timing Parameter 0 Register */
>> +#define AT91C_HDDRSDRC2_T1PR		0x10	/* Timing Parameter 1 Register */
>> +#define AT91C_HDDRSDRC2_T2PR		0x14	/* Timing Parameter 2 Register */
>> +#define AT91C_HDDRSDRC2_T3PR		0x18	/* Timing Parameter 3 Register */
>> +#define AT91C_HDDRSDRC2_LPR		0x1C	/* Low-power Register */
>> +#define AT91C_HDDRSDRC2_MDR		0x20	/* Memory Device Register */
>> +#define AT91C_HDDRSDRC2_DLL		0x24	/* DLL Information Register */
>> +#define AT91C_HDDRSDRC2_HS		0x2C	/* High Speed Register */
>> +
>> +/* below items defined for sama5d3x */
>> +#define	AT91C_MPDDRC_LPDDR2_HS		0x24	/* MPDDRC LPDDR2 High Speed Register */
>> +#define	AT91C_MPDDRC_LPDDR2_LPR		0x28	/* MPDDRC LPDDR2 Low-power Register */
>> +#define	AT91C_MPDDRC_LPDDR2_CAL_MR4	0x2C	/* MPDDRC LPDDR2 Calibration and MR4 Register */
>> +#define	AT91C_MPDDRC_LPDDR2_TIM_CAL	0x30	/* MPDDRC LPDDR2 Timing Calibration Register */
>> +#define	AT91C_MPDDRC_IO_CALIBR		0x34	/* MPDDRC IO Calibration */
>> +#define	AT91C_MPDDRC_OCMS		0x38	/* MPDDRC OCMS Register */
>> +#define	AT91C_MPDDRC_OCMS_KEY1		0x3C	/* MPDDRC OCMS KEY1 Register */
>> +#define	AT91C_MPDDRC_OCMS_KEY2		0x40	/* MPDDRC OCMS KEY2 Register */
>> +/* 0x54 ~ 0x70 Reserved */
>> +#define	AT91C_MPDDRC_DLL_MOR		0x74	/* MPDDRC DLL Master Offset Register */
>> +#define	AT91C_MPDDRC_DLL_SOR		0x78	/* MPDDRC DLL Slave Offset Register */
>> +#define	AT91C_MPDDRC_DLL_MSR		0x7C	/* MPDDRC DLL Master Status Register */
>> +#define	AT91C_MPDDRC_DLL_S0SR		0x80	/* MPDDRC DLL Slave 0 Status Register */
>> +#define	AT91C_MPDDRC_DLL_S1SR		0x84	/* MPDDRC DLL Slave 1 Status Register */
>> +
>> +#define AT91C_MPDDRC_RD_DATA_PATH	0x5C	/* MPDDRC Read Data Path */
>> +
>> +/* 0x94 ~ 0xE0 Reserved */
>> +#define AT91C_HDDRSDRC2_WPCR		0xE4	/* Write Protect Mode Register */
>> +#define AT91C_HDDRSDRC2_WPSR		0xE8	/* Write Protect Status Register */
>> +
>> +/* -------- HDDRSDRC2_MR : (HDDRSDRC2 Offset: 0x0) Mode Register --------*/
>> +#define AT91C_DDRC2_MODE	(0x7UL << 0)
>> +#define 	AT91C_DDRC2_MODE_NORMAL_CMD		(0x0UL)
>> +#define 	AT91C_DDRC2_MODE_NOP_CMD		(0x1UL)
>> +#define 	AT91C_DDRC2_MODE_PRCGALL_CMD		(0x2UL)
>> +#define 	AT91C_DDRC2_MODE_LMR_CMD		(0x3UL)
>> +#define 	AT91C_DDRC2_MODE_RFSH_CMD		(0x4UL)
>> +#define 	AT91C_DDRC2_MODE_EXT_LMR_CMD		(0x5UL)
>> +#define 	AT91C_DDRC2_MODE_DEEP_CMD		(0x6UL)
>> +#define		AT91C_DDRC2_MODE_LPDDR2_CMD		(0x7UL)
>> +#define AT91C_DDRC2_MRS(value)	(value << 8)
>> +
>> +/* -------- HDDRSDRC2_RTR : (HDDRSDRC2 Offset: 0x4) Refresh Timer Register -------- */
>> +#define AT91C_DDRC2_COUNT	(0xFFFUL << 0)
>> +
>> +/* -------- HDDRSDRC2_CR : (HDDRSDRC2 Offset: 0x8) Configuration Register --------*/
>> +#define AT91C_DDRC2_NC		(0x3UL <<  0)
>> +#define 	AT91C_DDRC2_NC_DDR9_SDR8	(0x0UL)
>> +#define 	AT91C_DDRC2_NC_DDR10_SDR9	(0x1UL)
>> +#define 	AT91C_DDRC2_NC_DDR11_SDR10	(0x2UL)
>> +#define 	AT91C_DDRC2_NC_DDR12_SDR11	(0x3UL)
>> +#define AT91C_DDRC2_NR		(0x3UL << 2)
>> +#define 	AT91C_DDRC2_NR_11		(0x0UL << 2)
>> +#define 	AT91C_DDRC2_NR_12		(0x1UL << 2)
>> +#define 	AT91C_DDRC2_NR_13		(0x2UL << 2)
>> +#define 	AT91C_DDRC2_NR_14		(0x3UL << 2)
>> +#define AT91C_DDRC2_CAS		(0x7UL << 4)
>> +#define 	AT91C_DDRC2_CAS_2		(0x2UL << 4)
>> +#define 	AT91C_DDRC2_CAS_3		(0x3UL << 4)
>> +#define 	AT91C_DDRC2_CAS_4		(0x4UL << 4)
>> +#define 	AT91C_DDRC2_CAS_5		(0x5UL << 4)
>> +#define 	AT91C_DDRC2_CAS_6		(0x6UL << 4)
>> +#define AT91C_DDRC2_RESET_DLL		(0x1UL << 7)
>> +#define 	AT91C_DDRC2_DISABLE_RESET_DLL	(0x0UL << 7)
>> +#define 	AT91C_DDRC2_ENABLE_RESET_DLL	(0x1UL << 7)
>> +#define AT91C_DDRC2_DIC_DS	(0x1UL << 8)
>> +#define		AT91C_DDRC2_NORMAL_STRENGTH_RZQ6	(0x0UL << 8)
>> +#define		AT91C_DDRC2_WEAK_STRENGTH_RZQ7		(0x1UL << 8)
>> +#define AT91C_DDRC2_DLL	(0x1UL << 9)
>> +#define 	AT91C_DDRC2_ENABLE_DLL		(0x0UL << 9)
>> +#define 	AT91C_DDRC2_DISABLE_DLL		(0x1UL << 9)
>> +#define AT91C_DDRC2_ZQ		(0x03 << 10)
>> +#define		AT91C_DDRC2_ZQ_INIT		(0x0 << 10)
>> +#define		AT91C_DDRC2_ZQ_LONG		(0x1 << 10)
>> +#define		AT91C_DDRC2_ZQ_SHORT		(0x2 << 10)
>> +#define		AT91C_DDRC2_ZQ_RESET		(0x3 << 10)
>> +#define AT91C_DDRC2_OCD		(0x7UL << 12)
>> +#define 	AT91C_DDRC2_OCD_EXIT		(0x0UL << 12)
>> +#define 	AT91C_DDRC2_OCD_DEFAULT		(0x7UL << 12)
>> +#define AT91C_DDRC2_EBISHARE	(0x1UL << 16)
>> +#define AT91C_DDRC2_DQMS	(0x1UL << 16)
>> +#define		AT91C_DDRC2_DQMS_NOT_SHARED	(0x0UL << 16)
>> +#define		AT91C_DDRC2_DQMS_SHARED		(0x1UL << 16)
>> +#define AT91C_DDRC2_ENRDM	(0x1UL << 17)
>> +#define 	AT91C_DDRC2_ENRDM_DISABLE	(0x0UL << 17)
>> +#define 	AT91C_DDRC2_ENRDM_ENABLE	(0x1UL << 17)
>> +#define AT91C_DDRC2_ACTBST	(0x1UL << 18)
>> +#define AT91C_DDRC2_NB_BANKS	(0x1UL << 20)
>> +#define 	AT91C_DDRC2_NB_BANKS_4		(0x0UL << 20)
>> +#define 	AT91C_DDRC2_NB_BANKS_8		(0x1UL << 20)
>> +#define AT91C_DDRC2_NDQS	(0x1UL << 21)	/* Not DQS(sama5d3x only) */
>> +#define 	AT91C_DDRC2_NDQS_ENABLED	(0x0UL << 21)
>> +#define 	AT91C_DDRC2_NDQS_DISABLED	(0x1UL << 21)
>> +#define AT91C_DDRC2_DECOD	(0x1UL << 22)
>> +#define 	AT91C_DDRC2_DECOD_SEQUENTIAL	(0x0UL << 22)
>> +#define 	AT91C_DDRC2_DECOD_INTERLEAVED	(0x1UL << 22)
>> +#define AT91C_DDRC2_UNAL	(0x1UL << 23)	/* Support Unaligned Access(sama5d3x only) */
>> +#define 	AT91C_DDRC2_UNAL_UNSUPPORTED		(0x0UL << 23)
>> +#define 	AT91C_DDRC2_UNAL_SUPPORTED		(0x1UL << 23)
>> +
>> +/* -------- HDDRSDRC2_T0PR : (HDDRSDRC2 Offset: 0xc) Timing0 Register --------*/
>> +#define AT91C_DDRC2_TRAS	(0xFUL <<  0)
>> +#define		AT91C_DDRC2_TRAS_(x)		(x & 0x0f)
>> +#define	AT91C_DDRC2_TRCD	(0xFUL <<  4)
>> +#define		AT91C_DDRC2_TRCD_(x)		((x & 0x0f) << 4)
>> +#define	AT91C_DDRC2_TWR		(0xFUL << 8)
>> +#define		AT91C_DDRC2_TWR_(x)		((x & 0x0f) << 8)
>> +#define	AT91C_DDRC2_TRC		(0xFUL << 12)
>> +#define		AT91C_DDRC2_TRC_(x)		((x & 0x0f) << 12)
>> +#define	AT91C_DDRC2_TRP		(0xFUL << 16)
>> +#define		AT91C_DDRC2_TRP_(x)		((x & 0x0f) << 16)
>> +#define	AT91C_DDRC2_TRRD	(0xFUL << 20)
>> +#define		AT91C_DDRC2_TRRD_(x)		((x & 0x0f) << 20)
>> +#define	AT91C_DDRC2_TWTR	(0xFUL << 24)
>> +#define		AT91C_DDRC2_TWTR_(x)		((x & 0x0f) << 24)
>> +#define	AT91C_DDRC2_TMRD	(0xFUL << 28)
>> +#define		AT91C_DDRC2_TMRD_(x)		((x & 0x0f) << 28)
>> +
>> +/* -------- HDDRSDRC2_T1PR : (HDDRSDRC2 Offset: 0x10) Timing1 Register -------- */
>> +#define	AT91C_DDRC2_TRFC	(0x7FUL <<  0)
>> +#define		AT91C_DDRC2_TRFC_(x)		(x & 0x7f)
>> +#define	AT91C_DDRC2_TXSNR	(0xFFUL << 8)
>> +#define		AT91C_DDRC2_TXSNR_(x)		((x & 0xff) << 8)
>> +#define AT91C_DDRC2_TXSRD	(0xFFUL << 16)
>> +#define		AT91C_DDRC2_TXSRD_(x)		((x & 0xff) << 16)
>> +#define	AT91C_DDRC2_TXP		(0xFUL << 24)
>> +#define		AT91C_DDRC2_TXP_(x)		((x & 0x0f) << 24)
>> +
>> +/* -------- HDDRSDRC2_T2PR : (HDDRSDRC2 Offset: 0x14) Timing2 Register --------*/
>> +#define	AT91C_DDRC2_TXARD	(0xFUL << 0)
>> +#define		AT91C_DDRC2_TXARD_(x)		(x & 0x0f)
>> +#define	AT91C_DDRC2_TXARDS	(0xFUL << 4)
>> +#define		AT91C_DDRC2_TXARDS_(x)		((x & 0x0f) << 4)
>> +#define	AT91C_DDRC2_TRPA	(0xFUL << 8)
>> +#define		AT91C_DDRC2_TRPA_(x)		((x & 0x0f) << 8)
>> +#define	AT91C_DDRC2_TRT		(0xFUL << 12)
>> +#define		AT91C_DDRC2_TRTP_(x)		((x & 0x0f) << 12)
>> +#define	AT91C_DDRC2_TFA		(0xFUL << 16)
>> +#define		AT91C_DDRC2_TFAW_(x)		((x & 0x0f) << 16)
>> +
>> +/* -------- HDDRSDRC2_LPR : (HDDRSDRC2 Offset: 0x1c) --------*/
>> +#define AT91C_DDRC2_LPCB	(0x3UL << 0)
>> +#define 	AT91C_DDRC2_LPCB_DISABLED	(0x0UL)
>> +#define 	AT91C_DDRC2_LPCB_SELFREFRESH	(0x1UL)
>> +#define 	AT91C_DDRC2_LPCB_POWERDOWN	(0x2UL)
>> +#define 	AT91C_DDRC2_LPCB_DEEP_PWD	(0x3UL)
>> +#define AT91C_DDRC2_CLK_FR	(0x1UL << 2)
>> +#define AT91C_DDRC2_PASR	(0x7UL << 4)
>> +#define		AT91C_DDRC2_PASR_(x)		((x & 0x7) << 4)
>> +#define AT91C_DDRC2_DS		(0x7UL << 8)
>> +#define		AT91C_DDRC2_DS_(x)		((x & 0x7) << 8)
>> +#define AT91C_DDRC2_TIMEOUT	(0x3UL << 12)
>> +#define 	AT91C_DDRC2_TIMEOUT_0		(0x0UL << 12)
>> +#define 	AT91C_DDRC2_TIMEOUT_64		(0x1UL << 12)
>> +#define 	AT91C_DDRC2_TIMEOUT_128		(0x2UL << 12)
>> +#define 	AT91C_DDRC2_TIMEOUT_Reserved	(0x3UL << 12)
>> +#define AT91C_DDRC2_ADPE	(0x1UL << 16)
>> +#define 	AT91C_DDRC2_ADPE_FAST		(0x0UL << 16)
>> +#define 	AT91C_DDRC2_ADPE_SLOW		(0x1UL << 16)
>> +#define AT91C_DDRC2_UPD_MR	(0x3UL << 20)
>> +#define		AT91C_DDRC2_UPD_MR_NO_UPDATE		(0x0UL << 20)
>> +#define		AT91C_DDRC2_UPD_MR_SHARED_BUS		(0x1UL << 20)
>> +#define		AT91C_DDRC2_UPD_MR_NO_SHARED_BUS	(0x2UL << 20)
>> +#define AT91C_DDRC2_SELF_DONE	(0x1UL << 25)
>> +
>> +/* -------- HDDRSDRC2_MDR : (HDDRSDRC2 Offset: 0x20) Memory Device Register -------- */
>> +#define AT91C_DDRC2_MD		(0x7UL << 0)
>> +#define 	AT91C_DDRC2_MD_SDR_SDRAM	(0x0UL)
>> +#define 	AT91C_DDRC2_MD_LP_SDR_SDRAM	(0x1UL)
>> +#define 	AT91C_DDRC2_MD_DDR_SDRAM	(0x2UL)
>> +#define 	AT91C_DDRC2_MD_LP_DDR_SDRAM	(0x3UL)
>> +#define 	AT91C_DDRC2_MD_DDR3_SDRAM	(0x4UL)
>> +#define 	AT91C_DDRC2_MD_LPDDR3_SDRAM	(0x5UL)
>> +#define 	AT91C_DDRC2_MD_DDR2_SDRAM	(0x6UL)
>> +#define		AT91C_DDRC2_MD_LPDDR2_SDRAM	(0x7UL)
>> +#define AT91C_DDRC2_DBW		(0x1UL << 4)
>> +#define 	AT91C_DDRC2_DBW_32_BITS		(0x0UL << 4)
>> +#define 	AT91C_DDRC2_DBW_16_BITS		(0x1UL << 4)
>> +
>> +/* -------- HDDRSDRC2_DLL : (HDDRSDRC2 Offset: 0x24) DLL Information Register --------*/
>> +#define AT91C_DDRC2_MDINC	(0x1UL << 0)
>> +#define AT91C_DDRC2_MDDEC	(0x1UL << 1)
>> +#define AT91C_DDRC2_MDOVF	(0x1UL << 2)
>> +#define AT91C_DDRC2_MDVAL	(0xFFUL << 8)
>> +
>> +/* ------- MPDDRC_LPDDR2_LPR (offset: 0x28) */
>> +#define AT91C_LPDDRC2_BK_MASK_PASR(value)	(value << 0)
>> +#define AT91C_LPDDRC2_SEG_MASK(value)		(value << 8)
>> +#define AT91C_LPDDRC2_DS(value)			(value << 24)
>> +
>> +/* -------- HDDRSDRC2_HS : (HDDRSDRC2 Offset: 0x2c) High Speed Register --------*/
>> +#define AT91C_DDRC2_NO_ANT	(0x1UL << 2)
>> +
>> +/* -------- MPDDRC_LPDDR2_CAL_MR4: (MPDDRC Offset: 0x2c) Calibration and MR4 Register --------*/
>> +#define AT91C_DDRC2_COUNT_CAL_MASK	(0xFFFFUL)
>> +#define AT91C_DDRC2_COUNT_CAL(value)	(((value) & AT91C_DDRC2_COUNT_CAL_MASK) << 0)
>> +
>> +/* -------- MPDDRC_LPDDR2_TIM_CAL : (MPDDRC Offset: 0x30) */
>> +#define AT91C_DDRC2_ZQCS(value)	(value << 0)
>> +
>> +/* -------- MPDDRC_IO_CALIBR : (MPDDRC Offset: 0x34) IO Calibration --------*/
>> +#define AT91C_MPDDRC_RDIV	(0x7UL << 0)
>> +#define 	AT91C_MPDDRC_RDIV_LPDDR2_RZQ_34		(0x1UL << 0)
>> +#define 	AT91C_MPDDRC_RDIV_LPDDR2_RZQ_48		(0x3UL << 0)
>> +#define 	AT91C_MPDDRC_RDIV_LPDDR2_RZQ_60		(0x4UL << 0)
>> +#define 	AT91C_MPDDRC_RDIV_LPDDR2_RZQ_120	(0x7UL << 0)
>> +
>> +#define 	AT91C_MPDDRC_RDIV_DDR2_RZQ_33_3		(0x2UL << 0)
>> +#define 	AT91C_MPDDRC_RDIV_DDR2_RZQ_50		(0x4UL << 0)
>> +#define		AT91C_MPDDRC_RDIV_DDR2_RZQ_66_7		(0x6UL << 0)
>> +#define 	AT91C_MPDDRC_RDIV_DDR2_RZQ_100		(0x7UL << 0)
>> +
>> +#define		AT91C_MPDDRC_RDIV_LPDDR3_RZQ_38		(0x02UL << 0)
>> +#define		AT91C_MPDDRC_RDIV_LPDDR3_RZQ_46		(0x03UL << 0)
>> +#define		AT91C_MPDDRC_RDIV_LPDDR3_RZQ_57		(0x04UL << 0)
>> +#define		AT91C_MPDDRC_RDIV_LPDDR3_RZQ_77		(0x06UL << 0)
>> +#define		AT91C_MPDDRC_RDIV_LPDDR3_RZQ_115	(0x07UL << 0)
>> +
>> +#define	AT91C_MPDDRC_ENABLE_CALIB	(0x01 << 4)
>> +#define		AT91C_MPDDRC_DISABLE_CALIB		(0x00 << 4)
>> +#define		AT91C_MPDDRC_EN_CALIB		(0x01 << 4)
>> +
>> +#define	AT91C_MPDDRC_TZQIO	(0x7FUL << 8)
>> +#define	AT91C_MPDDRC_TZQIO_(x)		((x) << 8)
>> +#define		AT91C_MPDDRC_TZQIO_0	(0x0UL << 8)
>> +#define		AT91C_MPDDRC_TZQIO_1	(0x1UL << 8)
>> +#define		AT91C_MPDDRC_TZQIO_3	(0x3UL << 8)
>> +#define		AT91C_MPDDRC_TZQIO_4	(0x4UL << 8)
>> +#define		AT91C_MPDDRC_TZQIO_5	(0x5UL << 8)
>> +#define		AT91C_MPDDRC_TZQIO_31	(0x1FUL << 8)
>> +
>> +#define	AT91C_MPDDRC_CALCODEP	(0xFUL << 16)
>> +#define		AT91C_MPDDRC_CALCODEP_(x)	((x) << 16)
>> +
>> +#define	AT91C_MPDDRC_CALCODEN	(0xFUL << 20)
>> +#define		AT91C_MPDDRC_CALCODEN_(x)	((x) << 20)
>> +
>> +/* ---- MPDDRC_RD_DATA_PATH : (MPDDRC Offset: 0x5c) MPDDRC Read Data Path */
>> +#define AT91_MPDDRC_SHIFT_SAMPLING	(0x03 << 0)
>> +#define		AT91C_MPDDRC_RD_DATA_PATH_NO_SHIFT	(0x00 << 0)
>> +#define		AT91C_MPDDRC_RD_DATA_PATH_ONE_CYCLES	(0x01 << 0)
>> +#define		AT91C_MPDDRC_RD_DATA_PATH_TWO_CYCLES	(0x02 << 0)
>> +#define		AT91C_MPDDRC_RD_DATA_PATH_THREE_CYCLES	(0x03 << 0)
>> +
>> +/* -------- MPDDRC_DLL_MOR : (MPDDRC Offset: 0x74) DLL Master Offset Register --------*/
>> +#define AT91C_MPDDRC_MOFF(value)	(value << 0)
>> +#define 	AT91C_MPDDRC_MOFF_1	(0x1UL << 0)
>> +#define 	AT91C_MPDDRC_MOFF_7	(0x7UL << 0)
>> +#define AT91C_MPDDRC_CLK90OFF(value)		(value << 8)
>> +#define 	AT91C_MPDDRC_CLK90OFF_1		(0x1UL << 8)
>> +#define 	AT91C_MPDDRC_CLK90OFF_31	(0x1FUL << 8)
>> +#define AT91C_MPDDRC_SELOFF	(0x1UL << 16)
>> +#define 	AT91C_MPDDRC_SELOFF_DISABLED	(0x0UL << 16)
>> +#define 	AT91C_MPDDRC_SELOFF_ENABLED	(0x1UL << 16)
>> +#define AT91C_MPDDRC_KEY	(0xC5UL << 24)
>> +
>> +/* -------- MPDDRC_DLL_SOR : (MPDDRC Offset: 0x78) DLL Slave Offset Register --------*/
>> +#define AT91C_MPDDRC_S0OFF_1	(0x1UL << 0)
>> +#define AT91C_MPDDRC_S1OFF_1	(0x1UL << 8)
>> +#define AT91C_MPDDRC_S2OFF_1	(0x1UL << 16)
>> +#define AT91C_MPDDRC_S3OFF_1	(0x1UL << 24)
>> +
>> +#define AT91C_MPDDRC_S0OFF(value)	(value << 0)
>> +#define AT91C_MPDDRC_S1OFF(value)	(value << 8)
>> +#define AT91C_MPDDRC_S2OFF(value)	(value << 16)
>> +#define AT91C_MPDDRC_S3OFF(value)	(value << 24)
>> +
>> +/* -------- HDDRSDRC2_WPCR : (HDDRSDRC2 Offset: 0xe4) Write Protect Control Register --------*/
>> +#define AT91C_DDRC2_WPEN	(0x1UL << 0)
>> +#define AT91C_DDRC2_WPKEY	(0xFFFFFFUL << 8)
>> +
>> +/* -------- HDDRSDRC2_WPSR : (HDDRSDRC2 Offset: 0xe8) Write Protect Status Register --------*/
>> +#define AT91C_DDRC2_WPVS	(0x1UL << 0)
>> +#define AT91C_DDRC2_WPSRC	(0xFFFFUL << 8)
>> +
>> +#endif /* __AT91_DDRSDRC_H__ */
>> -- 
>> 2.20.1
>>
>>
>> _______________________________________________
>> barebox mailing list
>> barebox@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/barebox
>>
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2019-02-26  9:04 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-19 17:21 [PATCH v2 00/16] ARM: at91: microchip-kz9477-evb: support first stage boot Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 01/16] LICENSES: add BSD-1-Clause license Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 02/16] ARM: at91: import at91bootstrap's at91_ddrsdrc.h Ahmad Fatoum
2019-02-22 13:33   ` Roland Hieber
2019-02-26  9:04     ` Ahmad Fatoum [this message]
2019-02-19 17:21 ` [PATCH v2 03/16] ARM: at91: migrate at91sam9_ddrsdr.h to use " Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 04/16] ARM: at91: replace at91sam9_ddrsdr.h with " Ahmad Fatoum
2019-02-20  9:07   ` Sascha Hauer
2019-02-19 17:21 ` [PATCH v2 05/16] ARM: at91: watchdog: implement at91_wdt_disable Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 06/16] ARM: at91: import lowlevel clock initialization from at91bootstrap Ahmad Fatoum
2019-02-20  9:11   ` Sascha Hauer
2019-02-19 17:21 ` [PATCH v2 07/16] ARM: at91: import early_udelay " Ahmad Fatoum
2019-02-20  9:20   ` Sascha Hauer
2019-02-20  9:23     ` Sascha Hauer
2019-02-19 17:21 ` [PATCH v2 08/16] ARM: at91: import low level DDRAMC initialization code " Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 09/16] ARM: at91: import lowlevel dbgu UART init " Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 10/16] images: at91: differentiate between first and second stage images Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 11/16] ARM: at91: sama5: specify 0x10000 as first stage max size Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 12/16] ARM: at91: microchip-ksz9477-evb: use compressed DTB Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 13/16] ARM: dts: microchip-ksz9477-evb: add dummy first stage device tree Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 14/16] ARM: at91: microchip-ksz9477-evb: implement first stage Ahmad Fatoum
2019-02-22 13:45   ` Roland Hieber
2019-02-26  9:05     ` Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 15/16] ARM: at91: microchip-ksz9477: provide board code fallback Ahmad Fatoum
2019-02-20  9:27   ` Sascha Hauer
2019-02-19 17:21 ` [PATCH v2 16/16] doc: microchip-ksz9477-evb: add documentation Ahmad Fatoum
2019-02-24 12:42 ` [PATCH v2 00/16] ARM: at91: microchip-kz9477-evb: support first stage boot Sam Ravnborg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=fb8ebfa4-f57f-26ba-75b6-0b4db5c98da6@pengutronix.de \
    --to=a.fatoum@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=rhi@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox