From: Roland Hieber <rhi@pengutronix.de>
To: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: oss-tools@pengutronix.de
Subject: Re: [OSS-Tools] [PATCH 2/8] libdt: factor out u64 sysattr parsing into helper
Date: Fri, 2 Jun 2023 15:30:26 +0200 [thread overview]
Message-ID: <20230602133026.okgaevnudnliu54c@pengutronix.de> (raw)
In-Reply-To: <20230602131613.n3iluklnm5onp5br@pengutronix.de>
On Fri, Jun 02, 2023 at 03:16:13PM +0200, Roland Hieber wrote:
> On Wed, May 31, 2023 at 05:22:47PM +0200, Ahmad Fatoum wrote:
> > We will need to parse two more sysattrs in a follow-up patch, so factor
> > this out for reuse. While at it switch to 64-bit strtoull: This may
> > be more useful for future users and unlike atol doesn't invoke undefined
> > behavior when parsing fails.
> >
> > Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> > ---
> > src/libdt.c | 42 +++++++++++++++++++++++++++++++++++-------
> > 1 file changed, 35 insertions(+), 7 deletions(-)
> >
> > diff --git a/src/libdt.c b/src/libdt.c
> > index 2c994c647ac9..580b0b0ba769 100644
> > --- a/src/libdt.c
> > +++ b/src/libdt.c
> > @@ -2179,6 +2179,33 @@ static struct udev_device *device_find_mtd_partition(struct udev_device *dev,
> > return NULL;
> > }
> >
> > +/*
>
> Use /** here so API doc generators could potentially pick it up (even
> if we don't build API docs right now, but all other functions are
> documented the same way).
OK disregard that, not all functions have /** comments */ above them, so
this is a separate issue.
- Roland
> > + * udev_device_parse_sysattr_u64 - parse sysattr value as unsigned 64-bit integer
> > + * @dev: the udev_device to extract the attribute from
> > + * @attr: name of the attribute to lookup
> > + * @outvalue: returns the value parsed out of the attribute
> > + *
> > + * returns 0 for success or negative error value on failure.
> > + */
> > +static int udev_device_parse_sysattr_u64(struct udev_device *dev, const char *attr,
> > + u64 *outvalue)
> > +{
> > + char *endptr;
> > + u64 value;
> > + const char *str;
> > +
> > + str = udev_device_get_sysattr_value(dev, attr);
> > + if (!str)
> > + return -EINVAL;
> > +
> > + value = strtoull(str, &endptr, 0);
> > + if (!*str || *endptr)
> > + return -EINVAL;
> > +
> > + *outvalue = value;
> > + return 0;
> > +}
> > +
> > /*
> > * device_find_block_device - extract device path from udev block device
> > *
> > @@ -2305,24 +2332,25 @@ static int udev_device_is_eeprom(struct udev_device *dev)
> > * udev_parse_mtd - get information from a mtd udev_device
> > * @dev: the udev_device to extract information from
> > * @devpath: returns the devicepath under which the mtd device is accessible
> > - * @size: returns the size of the mtd device
> > + * @outsize: returns the size of the mtd device
> > *
> > * returns 0 for success or negative error value on failure. *devpath
> > * will be valid on success and must be freed after usage.
> > */
> > -static int udev_parse_mtd(struct udev_device *dev, char **devpath, size_t *size)
> > +static int udev_parse_mtd(struct udev_device *dev, char **devpath, size_t *outsize)
> > {
> > - const char *sizestr;
> > const char *outpath;
> > + u64 size;
> > + int ret;
> >
> > if (!udev_device_is_mtd(dev))
> > return -EINVAL;
> >
> > - sizestr = udev_device_get_sysattr_value(dev, "size");
> > - if (!sizestr)
> > - return -EINVAL;
> > + ret = udev_device_parse_sysattr_u64(dev, "size", &size);
> > + if (ret)
> > + return ret;
> >
> > - *size = atol(sizestr);
> > + *outsize = size;
> >
> > outpath = udev_device_get_devnode(dev);
> > if (!outpath)
> > --
> > 2.39.2
> >
> >
> >
>
> --
> Roland Hieber, Pengutronix e.K. | r.hieber@pengutronix.de |
> Steuerwalder Str. 21 | https://www.pengutronix.de/ |
> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
>
>
--
Roland Hieber, Pengutronix e.K. | r.hieber@pengutronix.de |
Steuerwalder Str. 21 | https://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2023-06-02 13:30 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-31 15:22 [OSS-Tools] [PATCH 0/8] state: allow lookup of barebox state partition by Type GUID Ahmad Fatoum
2023-05-31 15:22 ` [OSS-Tools] [PATCH 1/8] state: backend: direct: open block device in read-only mode if possible Ahmad Fatoum
2023-05-31 15:22 ` [OSS-Tools] [PATCH 2/8] libdt: factor out u64 sysattr parsing into helper Ahmad Fatoum
2023-06-02 13:16 ` Roland Hieber
2023-06-02 13:30 ` Roland Hieber [this message]
2023-05-31 15:22 ` [OSS-Tools] [PATCH 3/8] libdt: drop broken if-branch Ahmad Fatoum
2023-06-07 9:02 ` Uwe Kleine-König
2023-05-31 15:22 ` [OSS-Tools] [PATCH 4/8] libdt: factor out __of_cdev_find helper Ahmad Fatoum
2023-05-31 15:22 ` [OSS-Tools] [PATCH 5/8] libdt: use block device partition instead of parent if found Ahmad Fatoum
2023-06-05 8:37 ` Roland Hieber
2023-05-31 15:22 ` [OSS-Tools] [PATCH 6/8] state: align with barebox use of of_cdev_find Ahmad Fatoum
2023-05-31 15:22 ` [OSS-Tools] [PATCH 7/8] libdt: use of_find_device_by_uuid for partuuid lookup Ahmad Fatoum
2023-05-31 15:22 ` [OSS-Tools] [PATCH 8/8] state: allow lookup of barebox state partition by Type GUID Ahmad Fatoum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230602133026.okgaevnudnliu54c@pengutronix.de \
--to=rhi@pengutronix.de \
--cc=a.fatoum@pengutronix.de \
--cc=oss-tools@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox