From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: Roland Hieber <rhi@pengutronix.de>
Cc: oss-tools@pengutronix.de
Subject: Re: [OSS-Tools] [PATCH 0/5] Add meson support and first test suite
Date: Mon, 12 Jun 2023 13:57:05 +0200 [thread overview]
Message-ID: <6a34a643-d76a-bfed-1fbf-38f56fb77352@pengutronix.de> (raw)
In-Reply-To: <20230605101741.nv7pmd2xzdfjfj4i@pengutronix.de>
On 05.06.23 12:17, Roland Hieber wrote:
> On Wed, May 31, 2023 at 05:31:20PM +0200, Ahmad Fatoum wrote:
>> The barebox,state binding is quite complex and we have a lot of udev
>> parsing code that can only be exercised by manually running
>> barebox-state on the target. Make development less error prone, by
>> adding tests for the block device bindings. EEPROM and MTD can
>> follow later.
>>
>> Tests are executed by meson as a runner. Patches to teach autotools
>> to do the same are welcome, although I think we should follow RAUC's
>> steps and eventually deprecate autotools once meson is on par.
>
> Yes.
>
>> The obvious wart is that we build with -fvisibility=hidden on autotools,
>> but with meson the same visibility option results in linker errors.
>>
>> I have no idea why yet, but that should only make meson-built
>> libdt-utils a bit slower without functional change.
>>
>> Ahmad Fatoum (5):
>> Add meson as build system
>> state: add option to lock device node
>> meson: add simple integration test
>> libdt: add CONFIG_TEST_LOOPBACK
>> test: add barebox-state loop block device tests
>
> For all:
> Tested-by: Roland Hieber <rhi@pengutronix.de>
Thanks. Applied to next.
>
>>
>> .gitignore | 2 +
>> README | 21 +
>> check-news.sh | 82 ++
>> configure.ac | 11 +
>> meson.build | 163 ++++
>> meson_options.txt | 25 +
>> src/barebox-state.c | 30 +-
>> src/barebox-state/state.c | 4 +
>> src/barebox-state/state.h | 21 +
>> src/dt/dt.h | 1 -
>> src/libdt.c | 50 +-
>> test/01-fixed-partition-no-gpt.dts | 34 +
>> ...2-fixed-partition-before-gpt-partition.dts | 34 +
>> test/03-fixed-partition-is-gpt-partition.dts | 34 +
>> test/04-gpt-partition-by-partuuid.dts | 31 +
>> test/05-gpt-partition-by-typeuuid.dts | 23 +
>> test/06-fixed-partition-by-diskuuid.dts | 33 +
>> test/07-raw-disk-fail.dts | 18 +
>> test/08-gpt-disk-no-typeuuid-fail.dts | 18 +
>> ...-partition-overlaps-two-gpt-partitions.dts | 34 +
>> ...-overlaps-two-gpt-partitions-partially.dts | 34 +
>> ...-fixed-partition-part-of-gpt-partition.dts | 34 +
>> test/barebox-state.dtsi | 53 ++
>> test/barebox-state.t | 229 +++++
>> test/crc32.c | 18 +
>> test/gpt-no-typeuuid.config | 33 +
>> test/gpt.config | 35 +
>> test/meson.build | 36 +
>> test/raw.config | 24 +
>> test/sharness.sh | 857 ++++++++++++++++++
>> version-gen | 3 +
>> version.h.in | 3 +
>> 32 files changed, 2012 insertions(+), 16 deletions(-)
>> create mode 100755 check-news.sh
>> create mode 100644 meson.build
>> create mode 100644 meson_options.txt
>> create mode 100644 test/01-fixed-partition-no-gpt.dts
>> create mode 100644 test/02-fixed-partition-before-gpt-partition.dts
>> create mode 100644 test/03-fixed-partition-is-gpt-partition.dts
>> create mode 100644 test/04-gpt-partition-by-partuuid.dts
>> create mode 100644 test/05-gpt-partition-by-typeuuid.dts
>> create mode 100644 test/06-fixed-partition-by-diskuuid.dts
>> create mode 100644 test/07-raw-disk-fail.dts
>> create mode 100644 test/08-gpt-disk-no-typeuuid-fail.dts
>> create mode 100644 test/31-fixed-partition-overlaps-two-gpt-partitions.dts
>> create mode 100644 test/32-fixed-partition-overlaps-two-gpt-partitions-partially.dts
>> create mode 100644 test/33-fixed-partition-part-of-gpt-partition.dts
>> create mode 100644 test/barebox-state.dtsi
>> create mode 100755 test/barebox-state.t
>> create mode 100644 test/crc32.c
>> create mode 100644 test/gpt-no-typeuuid.config
>> create mode 100644 test/gpt.config
>> create mode 100644 test/meson.build
>> create mode 100644 test/raw.config
>> create mode 100755 test/sharness.sh
>> create mode 100755 version-gen
>> create mode 100644 version.h.in
>>
>> --
>> 2.39.2
>>
>>
>>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
prev parent reply other threads:[~2023-06-12 11:57 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-31 15:31 Ahmad Fatoum
2023-05-31 15:31 ` [OSS-Tools] [PATCH 1/5] Add meson as build system Ahmad Fatoum
2023-05-31 15:31 ` [OSS-Tools] [PATCH 2/5] state: add option to lock device node Ahmad Fatoum
2023-05-31 15:31 ` [OSS-Tools] [PATCH 3/5] meson: add simple integration test Ahmad Fatoum
2023-05-31 15:31 ` [OSS-Tools] [PATCH 4/5] libdt: add CONFIG_TEST_LOOPBACK Ahmad Fatoum
2023-06-12 11:56 ` Ahmad Fatoum
2023-05-31 15:31 ` [OSS-Tools] [PATCH 5/5] test: add barebox-state loop block device tests Ahmad Fatoum
2023-06-05 10:17 ` [OSS-Tools] [PATCH 0/5] Add meson support and first test suite Roland Hieber
2023-06-12 11:57 ` Ahmad Fatoum [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6a34a643-d76a-bfed-1fbf-38f56fb77352@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=oss-tools@pengutronix.de \
--cc=rhi@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox