mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
To: barebox@lists.infradead.org
Cc: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Subject: [PATCH 10/13] tftp: do not use 'priv->block' for RRQ
Date: Mon, 18 Jul 2022 14:22:25 +0200	[thread overview]
Message-ID: <1b67079ff4323b61c0f5fbccd13123a6dd0edd5a.1658144543.git.enrico.scholz@sigma-chemnitz.de> (raw)
In-Reply-To: <cover.1658144543.git.enrico.scholz@sigma-chemnitz.de>

attribute is not used outside tftp_recv() for RRQ.

Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
---
 fs/tftp.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/fs/tftp.c b/fs/tftp.c
index 7f836d36b7df..f85136f03e22 100644
--- a/fs/tftp.c
+++ b/fs/tftp.c
@@ -298,6 +298,7 @@ static void tftp_recv(struct file_priv *priv,
 			uint8_t *pkt, unsigned len, uint16_t uh_sport)
 {
 	uint16_t opcode;
+	uint16_t block;
 
 	/* according to RFC1350 minimal tftp packet length is 4 bytes */
 	if (len < 4)
@@ -349,7 +350,6 @@ static void tftp_recv(struct file_priv *priv,
 		} else {
 			/* send ACK */
 			priv->state = STATE_OACK;
-			priv->block = 0;
 			priv->last_block = 0;
 			tftp_send(priv);
 		}
@@ -357,7 +357,7 @@ static void tftp_recv(struct file_priv *priv,
 		break;
 	case TFTP_DATA:
 		len -= 2;
-		priv->block = ntohs(*(uint16_t *)pkt);
+		block = ntohs(*(uint16_t *)pkt);
 
 		if (priv->state == STATE_RRQ || priv->state == STATE_OACK) {
 			/* first block received */
@@ -365,21 +365,21 @@ static void tftp_recv(struct file_priv *priv,
 			priv->tftp_con->udp->uh_dport = uh_sport;
 			priv->last_block = 0;
 
-			if (priv->block != 1) {	/* Assertion */
+			if (block != 1) {	/* Assertion */
 				pr_err("error: First block is not block 1 (%d)\n",
-					priv->block);
+					block);
 				priv->err = -EINVAL;
 				priv->state = STATE_DONE;
 				break;
 			}
 		}
 
-		if (priv->block != (uint16_t)(priv->last_block + 1)) {
+		if (block != (uint16_t)(priv->last_block + 1)) {
 			break;
 		}
 
 		tftp_timer_reset(priv);
-		tftp_put_data(priv, priv->block, pkt + 2, len);
+		tftp_put_data(priv, block, pkt + 2, len);
 
 		break;
 
-- 
2.36.1




  parent reply	other threads:[~2022-07-18 12:26 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-07-18 12:22 [PATCH 00/13] add "windowsize" (RFC 7440) support for tftp Enrico Scholz
2022-07-18 12:22 ` [PATCH 01/13] progress: add close_progress() to display some statistics Enrico Scholz
2022-07-18 12:22 ` [PATCH 02/13] libfile:copy_file: show statistics in verbose mode Enrico Scholz
2022-07-18 12:22 ` [PATCH 03/13] tftp: minor refactoring of RRQ/WRQ packet generation code Enrico Scholz
2022-07-18 12:22 ` [PATCH 04/13] tftp: replace hardcoded blksize by global constant Enrico Scholz
2022-07-18 12:22 ` [PATCH 05/13] tftp: record whether tftp file is opened for lookup operation only Enrico Scholz
2022-07-18 12:22 ` [PATCH 06/13] tftp: reduce block size on lookup requests Enrico Scholz
2022-07-18 12:22 ` [PATCH 07/13] tftp: refactor data processing Enrico Scholz
2022-07-18 12:22 ` [PATCH 08/13] tftp: detect out-of-memory situations Enrico Scholz
2022-07-18 12:22 ` [PATCH 09/13] tftp: implement 'windowsize' (RFC 7440) support Enrico Scholz
2022-07-31 11:36   ` [PATCH v2 " Enrico Scholz
2022-08-09  8:49     ` Sascha Hauer
2022-08-09  9:28       ` Enrico Scholz
2022-08-09  9:52         ` Sascha Hauer
2022-07-18 12:22 ` Enrico Scholz [this message]
2022-07-18 12:22 ` [PATCH 11/13] tftp: reorder tftp packets Enrico Scholz
2022-08-09  8:58   ` Sascha Hauer
2022-07-18 12:22 ` [PATCH 12/13] tftp: allow to change tftp port Enrico Scholz
2022-08-09  8:12   ` Sascha Hauer
2022-07-18 12:22 ` [PATCH 13/13] tftp: add sanity check for OACK response Enrico Scholz
2022-07-31 11:36   ` [PATCH v2 " Enrico Scholz
2022-08-09  9:02 ` [PATCH 00/13] add "windowsize" (RFC 7440) support for tftp Sascha Hauer
2022-08-09  9:35   ` Enrico Scholz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1b67079ff4323b61c0f5fbccd13123a6dd0edd5a.1658144543.git.enrico.scholz@sigma-chemnitz.de \
    --to=enrico.scholz@sigma-chemnitz.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox