mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 2/8] ARM: Remove datamodul-edm-qmx6_defconfig
Date: Wed, 11 Sep 2019 10:07:25 +0200	[thread overview]
Message-ID: <20190911080731.23102-2-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20190911080731.23102-1-s.hauer@pengutronix.de>

The edm-qmx6 is covered by the imx_v7_defconfig, so remove the board
specific config.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/configs/datamodul-edm-qmx6_defconfig | 88 -------------------
 1 file changed, 88 deletions(-)
 delete mode 100644 arch/arm/configs/datamodul-edm-qmx6_defconfig

diff --git a/arch/arm/configs/datamodul-edm-qmx6_defconfig b/arch/arm/configs/datamodul-edm-qmx6_defconfig
deleted file mode 100644
index b828b38e0f..0000000000
--- a/arch/arm/configs/datamodul-edm-qmx6_defconfig
+++ /dev/null
@@ -1,88 +0,0 @@
-CONFIG_ARCH_IMX=y
-CONFIG_BAREBOX_MAX_IMAGE_SIZE=0x31000
-CONFIG_IMX_MULTI_BOARDS=y
-CONFIG_MACH_REALQ7=y
-CONFIG_IMX_IIM=y
-CONFIG_IMX_IIM_FUSE_BLOW=y
-CONFIG_THUMB2_BAREBOX=y
-CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
-CONFIG_ARM_UNWIND=y
-CONFIG_MMU=y
-CONFIG_MALLOC_SIZE=0x0
-CONFIG_MALLOC_TLSF=y
-CONFIG_RELOCATABLE=y
-CONFIG_HUSH_FANCY_PROMPT=y
-CONFIG_CMDLINE_EDITING=y
-CONFIG_AUTO_COMPLETE=y
-CONFIG_BOOTM_SHOW_TYPE=y
-CONFIG_BOOTM_VERBOSE=y
-CONFIG_BOOTM_INITRD=y
-CONFIG_BOOTM_OFTREE=y
-CONFIG_BOOTM_OFTREE_UIMAGE=y
-CONFIG_CONSOLE_ACTIVATE_NONE=y
-CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
-CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/datamodul-edm-qmx6/env"
-CONFIG_RESET_SOURCE=y
-CONFIG_LONGHELP=y
-CONFIG_CMD_IOMEM=y
-CONFIG_CMD_MEMINFO=y
-CONFIG_CMD_ARM_MMUINFO=y
-# CONFIG_CMD_BOOTU is not set
-CONFIG_CMD_GO=y
-CONFIG_CMD_RESET=y
-CONFIG_CMD_PARTITION=y
-CONFIG_CMD_EXPORT=y
-CONFIG_CMD_PRINTENV=y
-CONFIG_CMD_MAGICVAR=y
-CONFIG_CMD_MAGICVAR_HELP=y
-CONFIG_CMD_SAVEENV=y
-CONFIG_CMD_FILETYPE=y
-CONFIG_CMD_LN=y
-CONFIG_CMD_MD5SUM=y
-CONFIG_CMD_UNCOMPRESS=y
-CONFIG_CMD_MSLEEP=y
-CONFIG_CMD_SLEEP=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MIITOOL=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_TFTP=y
-CONFIG_CMD_ECHO_E=y
-CONFIG_CMD_EDIT=y
-CONFIG_CMD_READLINE=y
-CONFIG_CMD_TIMEOUT=y
-CONFIG_CMD_CRC=y
-CONFIG_CMD_CRC_CMP=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DETECT=y
-CONFIG_CMD_FLASH=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_WD=y
-CONFIG_CMD_BAREBOX_UPDATE=y
-CONFIG_CMD_OF_NODE=y
-CONFIG_CMD_OF_PROPERTY=y
-CONFIG_CMD_OFTREE=y
-CONFIG_CMD_TIME=y
-CONFIG_NET=y
-CONFIG_OFDEVICE=y
-CONFIG_OF_BAREBOX_DRIVERS=y
-CONFIG_DRIVER_NET_FEC_IMX=y
-CONFIG_DRIVER_SPI_IMX=y
-CONFIG_I2C=y
-CONFIG_I2C_IMX=y
-CONFIG_MTD=y
-CONFIG_MTD_M25P80=y
-CONFIG_DISK_AHCI=y
-CONFIG_DISK_AHCI_IMX=y
-CONFIG_MCI=y
-CONFIG_MCI_IMX_ESDHC=y
-CONFIG_MFD_STMPE=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_IMX=y
-CONFIG_GPIO_STMPE=y
-CONFIG_FS_TFTP=y
-CONFIG_FS_NFS=y
-CONFIG_FS_FAT=y
-CONFIG_FS_FAT_WRITE=y
-CONFIG_FS_FAT_LFN=y
-- 
2.23.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2019-09-11  8:07 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-11  8:07 [PATCH 1/8] ARM: Remove vincell_defconfig Sascha Hauer
2019-09-11  8:07 ` Sascha Hauer [this message]
2019-09-11  8:07 ` [PATCH 3/8] ARM: Remove tqma53_defconfig Sascha Hauer
2019-09-11  8:07 ` [PATCH 4/8] ARM: Remove tx53stk5_defconfig Sascha Hauer
2019-09-11  8:07 ` [PATCH 5/8] ARM: NETX: remove architecture Sascha Hauer
2019-09-11  8:07 ` [PATCH 6/8] serial: Remove NETX serial driver Sascha Hauer
2019-09-11  8:07 ` [PATCH 7/8] net: Remove NETX ethernet driver Sascha Hauer
2019-09-11  8:07 ` [PATCH 8/8] scripts: Remove NETX image tool Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190911080731.23102-2-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox