mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [PATCH 20/28] ARM: at91: sama5d2: reuse stack set-up by first stage
Date: Wed,  1 Jul 2020 07:23:32 +0200	[thread overview]
Message-ID: <20200701052340.9462-21-a.fatoum@pengutronix.de> (raw)
In-Reply-To: <20200701052340.9462-1-a.fatoum@pengutronix.de>

Stack is always set up to end of SRAM before PBL, either by ROM code or
by first stage bootloader, be it at91bootstrap or barebox in a later
commit, so no need to change the stack pointer again.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
 arch/arm/boards/sama5d27-giantboard/lowlevel.c | 13 +++----------
 arch/arm/boards/sama5d27-som1/lowlevel.c       | 13 +++----------
 2 files changed, 6 insertions(+), 20 deletions(-)

diff --git a/arch/arm/boards/sama5d27-giantboard/lowlevel.c b/arch/arm/boards/sama5d27-giantboard/lowlevel.c
index e08217105bcc..4419e946f1a8 100644
--- a/arch/arm/boards/sama5d27-giantboard/lowlevel.c
+++ b/arch/arm/boards/sama5d27-giantboard/lowlevel.c
@@ -34,10 +34,12 @@ static void dbgu_init(void)
 
 extern char __dtb_z_at91_sama5d27_giantboard_start[];
 
-static noinline void giantboard_entry(void)
+ENTRY_FUNCTION(start_sama5d27_giantboard, r0, r1, r2)
 {
 	void *fdt;
 
+	arm_cpu_lowlevel_init();
+
 	if (IS_ENABLED(CONFIG_DEBUG_LL))
 		dbgu_init();
 
@@ -45,12 +47,3 @@ static noinline void giantboard_entry(void)
 
 	barebox_arm_entry(SAMA5_DDRCS, SZ_128M, fdt);
 }
-
-ENTRY_FUNCTION(start_sama5d27_giantboard, r0, r1, r2)
-{
-	arm_cpu_lowlevel_init();
-
-	arm_setup_stack(SAMA5D2_SRAM_BASE + SAMA5D2_SRAM_SIZE);
-
-	giantboard_entry();
-}
diff --git a/arch/arm/boards/sama5d27-som1/lowlevel.c b/arch/arm/boards/sama5d27-som1/lowlevel.c
index 2b39e5abc396..b7780ec8ae43 100644
--- a/arch/arm/boards/sama5d27-som1/lowlevel.c
+++ b/arch/arm/boards/sama5d27-som1/lowlevel.c
@@ -58,10 +58,12 @@ static void ek_dbgu_init(void)
 
 extern char __dtb_z_at91_sama5d27_som1_ek_start[];
 
-static noinline void som1_entry(void)
+ENTRY_FUNCTION(start_sama5d27_som1_ek, r0, r1, r2)
 {
 	void *fdt;
 
+	arm_cpu_lowlevel_init();
+
 	if (IS_ENABLED(CONFIG_DEBUG_LL))
 		ek_dbgu_init();
 
@@ -70,12 +72,3 @@ static noinline void som1_entry(void)
 	ek_turn_led(RGB_LED_GREEN);
 	barebox_arm_entry(SAMA5_DDRCS, SZ_128M, fdt);
 }
-
-ENTRY_FUNCTION(start_sama5d27_som1_ek, r0, r1, r2)
-{
-	arm_cpu_lowlevel_init();
-
-	arm_setup_stack(SAMA5D2_SRAM_BASE + SAMA5D2_SRAM_SIZE);
-
-	som1_entry();
-}
-- 
2.27.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2020-07-01  5:24 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-01  5:23 [PATCH 00/28] ARM: at91: add sama5d2 first stage support Ahmad Fatoum
2020-07-01  5:23 ` [PATCH 01/28] ARM: at91: remove <mach/hardware.h> include from assembly code Ahmad Fatoum
2020-07-01  5:23 ` [PATCH 02/28] ARM: at91: sama5d2: cast peripheral base addresses to __iomem pointers Ahmad Fatoum
2020-07-01  5:23 ` [PATCH 03/28] ARM: at91: import at91bootstrap's at91_ddrsdrc.h Ahmad Fatoum
2020-07-01  5:23 ` [PATCH 04/28] ARM: at91: migrate at91sam9_ddrsdr.h to use " Ahmad Fatoum
2020-07-01  5:23 ` [PATCH 05/28] ARM: at91: replace at91sam9_ddrsdr.h with " Ahmad Fatoum
2020-07-01  5:23 ` [PATCH 06/28] ARM: at91: import early_udelay from at91bootstrap Ahmad Fatoum
2020-07-01  5:23 ` [PATCH 07/28] ARM: at91: import low level DDRAMC initialization code " Ahmad Fatoum
2020-07-01  5:23 ` [PATCH 08/28] ARM: at91: watchdog: implement at91_wdt_disable Ahmad Fatoum
2020-07-01  5:23 ` [PATCH 09/28] watchdog: add support for at91sam9/sama5 watchdog Ahmad Fatoum
2020-07-01  5:23 ` [PATCH 10/28] ARM: at91: implement sama5d2 lowlevel init Ahmad Fatoum
2020-07-01  5:23 ` [PATCH 11/28] ARM: at91: sama5d2: add sama5d2 matrix configuration Ahmad Fatoum
2020-07-01  5:23 ` [PATCH 12/28] ARM: at91: add sama5d2 cache init Ahmad Fatoum
2020-07-01  5:23 ` [PATCH 13/28] ARM: at91: add necessary Advanced Interrupt Controller configuration Ahmad Fatoum
2020-07-01  5:23 ` [PATCH 14/28] ARM: at91: extend low level PMC driver for generic clk support Ahmad Fatoum
2020-07-01  5:23 ` [PATCH 15/28] pbl: add block I/O API Ahmad Fatoum
2020-07-01  5:23 ` [PATCH 16/28] fs: fat: extend for in-PBL support Ahmad Fatoum
2020-07-01  5:23 ` [PATCH 17/28] mci: extend atmel-sdhci driver to first stage use Ahmad Fatoum
2020-07-01  5:23 ` [PATCH 18/28] ARM: at91: add code for sama5 boot source detection Ahmad Fatoum
2020-07-01  5:23 ` [PATCH 19/28] ARM: at91: add helpers for chain-loading barebox from SD-card Ahmad Fatoum
2020-07-01  5:23 ` Ahmad Fatoum [this message]
2020-07-01  5:23 ` [PATCH 21/28] at91: debug_ll: remove duplicated IS_ENABLED(CONFIG_DEBUG_LL) condition Ahmad Fatoum
2020-07-01  5:23 ` [PATCH 22/28] ARM: at91: sama5d2: reduce UART setup boilerplate with new helpers Ahmad Fatoum
2020-07-01  5:23 ` [PATCH 23/28] ARM: at91: sama5d27-som1: add additional first stage entry point Ahmad Fatoum
2020-07-01  5:23 ` [PATCH 24/28] ARM: at91: sama5d2: read back memory size from DDRAM controller Ahmad Fatoum
2020-07-01  5:23 ` [PATCH 25/28] ARM: at91: sama5d2: populate $bootsource and $bootsource_instance Ahmad Fatoum
2020-07-01  5:23 ` [PATCH 26/28] ARM: at91: sama5d27-som1-ek: add barebox_update and multi environment support Ahmad Fatoum
2020-07-01  5:23 ` [PATCH 27/28] ARM: at91: sama5d27-giantboard: add additional first stage entry point Ahmad Fatoum
2020-07-01  5:23 ` [PATCH 28/28] ARM: at91: sama5d27-giantboard: add default environment/bbu Ahmad Fatoum
2020-07-01  9:10 [PATCH RESEND 00/28] ARM: at91: add sama5d2 first stage support Ahmad Fatoum
2020-07-01  9:11 ` [PATCH 20/28] ARM: at91: sama5d2: reuse stack set-up by first stage Ahmad Fatoum

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200701052340.9462-21-a.fatoum@pengutronix.de \
    --to=a.fatoum@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox