mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [PATCH 1/2] README: update to reflect current state
Date: Mon, 14 Sep 2020 22:03:08 +0200	[thread overview]
Message-ID: <20200914200309.32513-1-a.fatoum@pengutronix.de> (raw)

The bulk of the README has stayed unchanged for the last ten years or
so. Polish it up up a bit.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
 README | 40 ++++++++++++++++++++--------------------
 1 file changed, 20 insertions(+), 20 deletions(-)

diff --git a/README b/README
index d8077d21b618..c4c8abbb4b62 100644
--- a/README
+++ b/README
@@ -18,33 +18,34 @@ Features
 
 - The environment is not a variable store anymore, but a file store. It has
   currently some limitations, of course. The environment is not a real
-  read/write filesystem, it is more like a tar archive, or even more like
-  an ar archive, because it cannot handle directories. The saveenv command
-  saves the files under a certain directory (by default /env) in persistent
-  storage (by default /dev/env0). There is a counterpart called loadenv, too.
+  read/write filesystem, but more like a tar archive.
+  The saveenv command saves the files under a certain directory (by default
+  /env) in persistent storage (by default /dev/env0). There is a counterpart
+  called loadenv, too.
 
 - filesystem support
   The loader starts up with mounting a ramdisk on /. Then a devfs is mounted
   on /dev allowing the user (or shell commands) to access devices. Apart from
-  these two filesystems there is currently one filesystem ported: cramfs. One
-  can mount it with the usual mount command.
+  these two filesystems there are a number of different filesystems ported:
+  ext4, efi, efivarfs, ext4, fat, jffs2, NFS, pstore, squashfs, ubifs,
+  u-boot variable FS among others.
 
 - device/driver model
   Devices are no longer described by defines in the config file. Instead
-  there are devices which can be registered in the board .c file or
-  dynamically allocated. Drivers will match upon the devices automatically.
+  devices are registered as they are discovered (e.g. through OpenFirmware
+  device tree traversal or EFI handles) or by board code.
+  Drivers will match upon the devices automatically.
 
 - clocksource support
   Timekeeping has been simplified by the use of the Linux clocksource API.
-  Only one function is needed for a new board, no [gs]et_timer[masked]() or
-  reset_timer[masked]() functions.
+  no [gs]et_timer[masked]() or reset_timer[masked]() functions.
 
 - Kconfig and Kernel build system
   Only targets which are really needed get recompiled. Parallel builds are
   no problem anymore. This also removes the need for many many ifdefs in
   the code.
 
-- simulation target
+- ARCH=sandbox simulation target
   barebox can be compiled to run under Linux. While this is rather useless
   in real world this is a great debugging and development aid. New features
   can be easily developed and tested on long train journeys and started
@@ -53,7 +54,7 @@ Features
   devices under barebox to emulate storage devices.
 
 - device parameter support
-  Each device can have a unlimited number of parameters. They can be accessed
+  Each device can have an unlimited number of parameters. They can be accessed
   on the command line with <devid>.<param>="...", for example
   'eth0.ip=192.168.0.7' or 'echo $eth0.ip'
 
@@ -83,7 +84,7 @@ For the examples below, we use the User Mode barebox implementation, which
 is a port of barebox to the Linux userspace. This makes it possible to
 test drive the code without having real hardware. So for this test
 scenario, ARCH=sandbox is the valid architecture selection. This currently
-only works on ia32 hosts and partly on x86-64.
+works on at least IA32 hosts and x86-64 hosts.
 
 Selection of the architecture and the cross compiler can be done by using
 the environment variables ARCH and CROSS_COMPILE.
@@ -137,7 +138,7 @@ loaded the example environment barebox will show you a menu asking for
 your settings.
 
 If you have started barebox as root you will find a new tap device on your
-host which you can configure using ifconfig. Once you configured bareboxs
+host which you can configure using ifconfig. Once you configured barebox'
 network settings accordingly you can do a ping or tftpboot.
 
 If you have mapped a cramfs image try mounting it with
@@ -157,16 +158,15 @@ Directory Layout
 
 Most of the directory layout is based upon the Linux Kernel:
 
-arch/*/               -> contains architecture specific parts
-arch/*/mach-*/        -> SoC specific code
+arch/*                -> contains architecture specific parts
+arch/*/include        -> architecture specific includes
+arch/*/mach-*         -> SoC specific code
+arch/*/mach-*/include -> SoC specific includes
 
 drivers/serial        -> drivers
 drivers/net
 drivers/...
 
-include/asm-*         -> architecture specific includes
-include/asm-*/arch-*  -> SoC specific includes
-
 fs/                   -> filesystem support and filesystem drivers
 
 lib/                  -> generic library functions (getopt, readline and the
@@ -188,7 +188,7 @@ Documentation/        -> Sphinx generated documentation. Call "make docs" to
 Release Strategy
 ----------------
 
-Barebox is developed with git. From time to time, tarball releases are
+Barebox is developed with git. On a monthly schedule, tarball releases are
 branched from the repository and released on the project web site. Here
 are the release rules:
 
-- 
2.28.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

             reply	other threads:[~2020-09-14 20:03 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-14 20:03 Ahmad Fatoum [this message]
2020-09-14 20:03 ` [PATCH 2/2] README: use lower-case barebox spelling Ahmad Fatoum
2020-09-15 12:48 ` [PATCH 1/2] README: update to reflect current state Sascha Hauer
2020-10-10 13:34 ` Roland Hieber

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200914200309.32513-1-a.fatoum@pengutronix.de \
    --to=a.fatoum@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox