From: Marco Felsch <m.felsch@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 02/18] ARM: boards: mx6-sabrelite: [cosmetic] make use of IMX_GPIO_NR
Date: Mon, 28 Sep 2020 17:50:25 +0200 [thread overview]
Message-ID: <20200928155041.32649-3-m.felsch@pengutronix.de> (raw)
In-Reply-To: <20200928155041.32649-1-m.felsch@pengutronix.de>
Convert the global number to the more readable IMX_GPIO_NR() macro, no
functional changes.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
---
.../boards/freescale-mx6-sabrelite/board.c | 20 +++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boards/freescale-mx6-sabrelite/board.c b/arch/arm/boards/freescale-mx6-sabrelite/board.c
index f4f2994a51..020a44297a 100644
--- a/arch/arm/boards/freescale-mx6-sabrelite/board.c
+++ b/arch/arm/boards/freescale-mx6-sabrelite/board.c
@@ -70,37 +70,37 @@ static int ksz9021rn_phy_fixup(struct phy_device *dev)
static struct gpio fec_gpios[] = {
{
- .gpio = 87,
+ .gpio = IMX_GPIO_NR(3, 23),
.flags = GPIOF_OUT_INIT_LOW,
.label = "phy-rst",
}, {
- .gpio = 190,
+ .gpio = IMX_GPIO_NR(6, 30),
.flags = GPIOF_OUT_INIT_HIGH,
.label = "phy-addr2",
}, {
- .gpio = 23,
+ .gpio = IMX_GPIO_NR(1, 23),
.flags = GPIOF_OUT_INIT_LOW,
.label = "phy-led-mode",
}, {
/* MODE strap-in pins: advertise all capabilities */
- .gpio = 185,
+ .gpio = IMX_GPIO_NR(6, 25),
.flags = GPIOF_OUT_INIT_HIGH,
.label = "phy-adv1",
}, {
- .gpio = 187,
+ .gpio = IMX_GPIO_NR(6, 27),
.flags = GPIOF_OUT_INIT_HIGH,
.label = "phy-adv1",
}, {
- .gpio = 188,
+ .gpio = IMX_GPIO_NR(6, 28),
.flags = GPIOF_OUT_INIT_HIGH,
.label = "phy-adv1",
}, {
- .gpio = 189,
+ .gpio = IMX_GPIO_NR(6, 29),
.flags = GPIOF_OUT_INIT_HIGH,
.label = "phy-adv1",
}, {
/* Enable 125 MHz clock output */
- .gpio = 184,
+ .gpio = IMX_GPIO_NR(6, 24),
.flags = GPIOF_OUT_INIT_HIGH,
.label = "phy-125MHz",
},
@@ -139,9 +139,9 @@ fs_initcall(sabrelite_ksz9021rn_setup);
static void sabrelite_ehci_init(void)
{
/* hub reset */
- gpio_direction_output(204, 0);
+ gpio_direction_output(IMX_GPIO_NR(7, 12), 0);
udelay(2000);
- gpio_set_value(204, 1);
+ gpio_set_value(IMX_GPIO_NR(7, 12), 1);
}
static int sabrelite_devices_init(void)
--
2.20.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2020-09-28 15:51 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-28 15:50 [PATCH 00/18] Barebox Deep-Probe Marco Felsch
2020-09-28 15:50 ` [PATCH 01/18] video: ssd1307fb: fix VBAT supply id Marco Felsch
2020-09-28 15:58 ` Ahmad Fatoum
2020-09-28 15:50 ` Marco Felsch [this message]
2020-09-28 16:00 ` [PATCH 02/18] ARM: boards: mx6-sabrelite: [cosmetic] make use of IMX_GPIO_NR Ahmad Fatoum
2020-09-28 15:50 ` [PATCH 03/18] drivers: gpio: treewide: [cosmetic] use register_driver_macros Marco Felsch
2020-09-28 16:04 ` Ahmad Fatoum
2020-09-29 8:20 ` Sascha Hauer
2020-09-28 15:50 ` [PATCH 04/18] ARM: mx6-sabrelite: remove obsolete sabrelite_mem_init() Marco Felsch
2020-09-28 16:07 ` Ahmad Fatoum
2020-09-28 15:50 ` [PATCH 05/18] spi: core: don't ignore register_device failures Marco Felsch
2020-09-28 15:50 ` [PATCH 06/18] regulator: improve of_regulator_register error handling Marco Felsch
2020-09-28 15:50 ` [PATCH 07/18] regulator: test of_regulator_register input before accessing it Marco Felsch
2020-09-28 16:11 ` Ahmad Fatoum
2020-09-28 15:50 ` [PATCH 08/18] regulator: stpmic1: fix registering missed regulators Marco Felsch
2020-09-28 15:50 ` [PATCH 09/18] regulator: add device reference to regulator_dev Marco Felsch
2020-09-28 15:50 ` [PATCH 10/18] regulator: treewide: drop local device_d reference Marco Felsch
2020-09-28 15:50 ` [PATCH 11/18] of: platform: fix of_amba_device_create stub return value Marco Felsch
2020-09-28 15:50 ` [PATCH 12/18] of: base: move memory init from DT to initcall Marco Felsch
2020-09-28 15:50 ` [PATCH 13/18] of: base: move clock init from of_probe() to barebox_register_of() Marco Felsch
2020-09-28 15:50 ` [PATCH 14/18] initcall: add of_populate_initcall Marco Felsch
2020-09-28 15:50 ` [PATCH 15/18] common: add initial barebox deep-probe support Marco Felsch
2020-09-28 16:53 ` Ahmad Fatoum
2020-09-29 15:55 ` Marco Felsch
2020-09-28 15:50 ` [PATCH 16/18] ARM: i.MX: esdctl: add " Marco Felsch
2020-09-28 15:50 ` [PATCH 17/18] ARM: stm32mp: ddrctrl: " Marco Felsch
2020-09-28 15:50 ` [PATCH 18/18] ARM: boards: mx6-sabrelite: " Marco Felsch
2020-09-28 16:58 ` Ahmad Fatoum
2020-09-29 8:30 ` [PATCH 00/18] Barebox Deep-Probe Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200928155041.32649-3-m.felsch@pengutronix.de \
--to=m.felsch@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox