mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Marco Felsch <m.felsch@pengutronix.de>
To: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] usb: i.MX: improve regulator handling
Date: Wed, 21 Oct 2020 16:29:15 +0200	[thread overview]
Message-ID: <20201021142915.2wfefcrazkq42bgv@pengutronix.de> (raw)
In-Reply-To: <20201021054907.sunblqmijd4jl6zn@pengutronix.de>

On 20-10-21 07:49, Uwe Kleine-König wrote:
> On Tue, Oct 20, 2020 at 04:58:44PM +0200, Marco Felsch wrote:
> > On 20-10-20 16:28, Marco Felsch wrote:
> > > On 20-10-20 16:09, Sascha Hauer wrote:
> > > > On Tue, Oct 20, 2020 at 03:33:17PM +0200, Marco Felsch wrote:
> > > > > Hi Uwe,
> > > > > 
> > > > > On 20-10-20 13:15, Uwe Kleine-König wrote:
> > > > > > Instead of just ignoring errors related to regulator getting error out.
> > > > > > In case there is no regulator in the device tree, regulator_get() returns
> > > > > > the dummy regulator and not an error code, so the change is right for
> > > > > > this situation, too.
> > > > > > 
> > > > > > Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> > > > > > ---
> > > > > >  drivers/usb/imx/chipidea-imx.c | 7 +++++--
> > > > > >  1 file changed, 5 insertions(+), 2 deletions(-)
> > > > > > 
> > > > > > diff --git a/drivers/usb/imx/chipidea-imx.c b/drivers/usb/imx/chipidea-imx.c
> > > > > > index 786beede6d89..dd0e3c1a2a58 100644
> > > > > > --- a/drivers/usb/imx/chipidea-imx.c
> > > > > > +++ b/drivers/usb/imx/chipidea-imx.c
> > > > > > @@ -267,8 +267,11 @@ static int imx_chipidea_probe(struct device_d *dev)
> > > > > >  	}
> > > > > >  
> > > > > >  	ci->vbus = regulator_get(dev, "vbus");
> > > > > > -	if (IS_ERR(ci->vbus))
> > > > > > -		ci->vbus = NULL;
> > > > > > +	if (IS_ERR(ci->vbus)) {
> > > > > > +		ret = ERR_PTR(ci->vbus);
> > > > > > +		dev_err(dev, "Cannot get vbus regulator: %s\n", strerror(-ret));
> > > > > > +		return ret;
> > > > > 
> > > > > Returning the error here can cause problems with exisiting boards, e.g.
> > > > > if the regulator support is missing for the specified vbus regulator.
> > > > > This is often the case since we have very limited regulator support for
> > > > > now.
> > > > 
> > > > But when there is a regulator we also have to control it, right?
> > > 
> > > So you need to add each regulator driver or worst case you need to add
> > > PMIC drivers.
> 
> Right, as if you don't the hardware might be off and USB won't work
> without a useful error message.

Adding a warining seems valid to me but returning a error is wrong since
the mainline driver explicite says: "/* no vbus regulator is needed */".

> > > If I remember correctly, I added the same for mci which
> > > broke a lot of boards. Later you reverted those commit. Now Oleksij
> > > added the regulator support for the fec driver and people are starting 
> > > to remove the phy-supply handle from the barebox-dt's (commit 84cf5cfa9a
> > > ("ARM: dts: imx6qdl: pfla02: Remove fec phy-supply")). I'm not again
> 
> Looking at 84cf5cfa9a there is at least a comment missing about why this
> property is deleted. Something like
> 
> diff --git a/arch/arm/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/dts/imx6qdl-phytec-pfla02.dtsi
> index b83511cb011f..7a12e2a06be4 100644
> --- a/arch/arm/dts/imx6qdl-phytec-pfla02.dtsi
> +++ b/arch/arm/dts/imx6qdl-phytec-pfla02.dtsi
> @@ -84,6 +84,11 @@
>  };
>  
>  &fec {
> +	/*
> +	 * barebox doesn't have a driver for the PMIC providing the phy-supply
> +	 * (dlg,da9063). So remove the phy-supply property and rely on the
> +	 * PMIC's reset default which has this supply enabled.
> +	 */
>  	/delete-property/ phy-supply;
>  };
>  
> 
> > > this patch, just wanted to show the consequences of it.
> > 
> > Sorry I have to correct myself, pls check the linux driver:
> > 
> > static int ci_get_platdata(struct device *dev,
> > 			   struct ci_hdrc_platform_data *platdata)
> > {
> > 
> > ...
> > 
> > /* Get the vbus regulator */
> > platdata->reg_vbus = devm_regulator_get_optional(dev, "vbus");
> > if (PTR_ERR(platdata->reg_vbus) == -EPROBE_DEFER) {
> > 	return -EPROBE_DEFER;
> > } else if (PTR_ERR(platdata->reg_vbus) == -ENODEV) {
> > 	/* no vbus regulator is needed */
> > 	platdata->reg_vbus = NULL;
> > } else if (IS_ERR(platdata->reg_vbus)) {
> > 	dev_err(dev, "Getting regulator error: %ld\n",
> > 		PTR_ERR(platdata->reg_vbus));
> > 	return PTR_ERR(platdata->reg_vbus);
> > }
> 
> The difference between regulator_get and regulator_get_optional is that
> the former doesn't return -ENODEV but yields the dummy regulator
> instead. 

Nope, regulator_get returns dummy-regulators too and -ENODEV is returned
in case of regulator_get_optional() too, pls. check:

/* Internal regulator request function */
struct regulator *_regulator_get(struct device *dev, const char *id,
				 enum regulator_get_type get_type)
{
    ...
}

Regards,
  Marco

> (Yes, this is the inversed semantic compared with
> gpio_get_optional() and clk_get_optional().) So using
> devm_regulator_get_optional and ignoring -ENODEV is kind of strange.  So
> I think the above can be simplified to:
> 
> 	platdata->reg_vbus = devm_regulator_get(dev, "vbus");
> 	if (IS_ERR(platdata->reg_vbus))
> 		return dev_err_probe(dev, PTR_ERR(platdata->reg_vbus),
> 				     "Failed to get vbus regulator\n");
> 	
> 
> and then it is more obvious that my barebox patch does the same.
> 
> Am I missing something?
> 
> Best regards
> Uwe
> 
> -- 
> Pengutronix e.K.                           | Uwe Kleine-König            |
> Industrial Linux Solutions                 | https://www.pengutronix.de/ |



> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox


-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2020-10-21 14:29 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-20 11:15 Uwe Kleine-König
2020-10-20 13:33 ` Marco Felsch
2020-10-20 14:09   ` Sascha Hauer
2020-10-20 14:28     ` Marco Felsch
2020-10-20 14:58       ` Marco Felsch
2020-10-21  5:49         ` Uwe Kleine-König
2020-10-21  6:07           ` Sascha Hauer
2020-10-21 14:29           ` Marco Felsch [this message]
2020-10-21 15:28             ` Marco Felsch
2020-10-21 19:05               ` Uwe Kleine-König
2020-10-21 10:05 ` Sascha Hauer
2020-10-21 12:03   ` Uwe Kleine-König
2020-10-21 12:31     ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201021142915.2wfefcrazkq42bgv@pengutronix.de \
    --to=m.felsch@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=u.kleine-koenig@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox