From: Roland Hieber <rhi@pengutronix.de>
To: Marco Felsch <m.felsch@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v2 3/3] fs: add linux_rootarg 'root=mmcblkXpN' support
Date: Sun, 9 May 2021 15:32:31 +0200 [thread overview]
Message-ID: <20210509133230.lcqn7bgitmr5axcg@pengutronix.de> (raw)
In-Reply-To: <20210506162616.11593-3-m.felsch@pengutronix.de>
On Thu, May 06, 2021 at 06:26:16PM +0200, Marco Felsch wrote:
> Since commit fa2d0aa96941 ("mmc: core: Allow setting slot index via
> device tree alias") the linux kernel supports stable mmc device names.
> Barebox has stable names since years so now we can connect both which
> allows us to pass 'root=mmcblkXpN' as argument for the cmdline. Note: it
> is crucial that the kernel device tree and the barebox device tree uses
> the same mmc aliases.
>
> This patch adds the support to store the above cmdline as linux_rootarg
> if enabled. The partuuid is now used as fallback since it is not as
> unique as the mmcblkXpN scheme. It is added as build option since the
> system integrator needs to check if the used kernel contains the above
> commit.
>
> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> ---
> v2:
> - improved Kconfig deps
> - improved Kconfig help message
> - minimal get_linux_mmcblkdev() simplifications
>
> common/Kconfig | 21 +++++++++++++++++++++
> fs/fs.c | 42 ++++++++++++++++++++++++++++++++++++++----
> 2 files changed, 59 insertions(+), 4 deletions(-)
>
> diff --git a/common/Kconfig b/common/Kconfig
> index 6b3c1701be..5815ea06f0 100644
> --- a/common/Kconfig
> +++ b/common/Kconfig
> @@ -700,6 +700,27 @@ config FLEXIBLE_BOOTARGS
> to replace parts of the bootargs string without reconstructing it
> completely.
>
> +config MMCBLKDEV_ROOTARG
> + bool
> + prompt "Support 'root=mmcblkXpN' cmdline appending"
> + depends on FLEXIBLE_BOOTARGS
> + depends on MCI
> + depends on OFTREE
> + help
> + Enable this option to append 'root=mmcblkXpN' to the cmdline instead
> + of 'root=PARTUUID=XYZ'. Don't enale this option if your used linux
> + kernel don't contain commit [1]. The first linux kernel release
Nit: s/enale/enable/; s/don't/doesn't/ (can probably fixed during git-am).
- Roland
> + containing that commit is v5.10-rc1.
> +
> + The appending only happen if barebox 'linux.bootargs.bootm.appendroot'
> + variable is set or the used blspec entry contains 'linux-appendroot'.
> +
> + Note: It is crucial that the kernel device tree and the barebox device
> + tree uses the same mmc aliases.
> +
> + [1] fa2d0aa96941 ("mmc: core: Allow setting slot index via device tree
> + alias")
> +
> config BAREBOX_UPDATE
> bool "In-system barebox update infrastructure"
>
> diff --git a/fs/fs.c b/fs/fs.c
> index 881dc2fca0..91feee03e6 100644
> --- a/fs/fs.c
> +++ b/fs/fs.c
> @@ -2831,6 +2831,33 @@ out:
> }
> EXPORT_SYMBOL(chdir);
>
> +static char *get_linux_mmcblkdev(struct fs_device_d *fsdev)
> +{
> + struct cdev *cdevm, *cdev;
> + int id, partnum;
> +
> + cdevm = fsdev->cdev->master;
> + id = of_alias_get_id(cdevm->device_node, "mmc");
> + if (id < 0)
> + return NULL;
> +
> + partnum = 1; /* linux partitions are 1 based */
> + list_for_each_entry(cdev, &cdevm->partitions, partition_entry) {
> +
> + /*
> + * Partname is not guaranteed but this partition cdev is listed
> + * in the partitions list so we need to count it instead of
> + * skipping it.
> + */
> + if (cdev->partname &&
> + !strcmp(cdev->partname, fsdev->cdev->partname))
> + return basprintf("root=/dev/mmcblk%dp%d", id, partnum);
> + partnum++;
> + }
> +
> + return NULL;
> +}
> +
> /*
> * Mount a device to a directory.
> * We do this by registering a new device on which the filesystem
> @@ -2919,11 +2946,18 @@ int mount(const char *device, const char *fsname, const char *pathname,
>
> fsdev->vfsmount.mnt_root = fsdev->sb.s_root;
>
> - if (!fsdev->linux_rootarg && fsdev->cdev && fsdev->cdev->partuuid[0] != 0) {
> - char *str = basprintf("root=PARTUUID=%s",
> - fsdev->cdev->partuuid);
> + if (!fsdev->linux_rootarg && fsdev->cdev) {
> + char *str = NULL;
> +
> + if (IS_ENABLED(CONFIG_MMCBLKDEV_ROOTARG) &&
> + cdev_is_mci_main_part_dev(fsdev->cdev->master))
> + str = get_linux_mmcblkdev(fsdev);
> +
> + if (!str && fsdev->cdev->partuuid[0] != 0)
> + str = basprintf("root=PARTUUID=%s", fsdev->cdev->partuuid);
>
> - fsdev_set_linux_rootarg(fsdev, str);
> + if (str)
> + fsdev_set_linux_rootarg(fsdev, str);
> }
>
> path_put(&path);
> --
> 2.29.2
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Roland Hieber, Pengutronix e.K. | r.hieber@pengutronix.de |
Steuerwalder Str. 21 | https://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2021-05-09 13:34 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-06 16:26 [PATCH v2 1/3] driver: add flag to check if cdev is an mci device Marco Felsch
2021-05-06 16:26 ` [PATCH v2 2/3] mci: mci-core: set the DEVFS_IS_MCI_MAIN_PART_DEV flag Marco Felsch
2021-05-06 16:26 ` [PATCH v2 3/3] fs: add linux_rootarg 'root=mmcblkXpN' support Marco Felsch
2021-05-09 13:32 ` Roland Hieber [this message]
2021-05-10 10:26 ` Marco Felsch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210509133230.lcqn7bgitmr5axcg@pengutronix.de \
--to=rhi@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=m.felsch@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox