mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Steffen Trumtrar <s.trumtrar@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH v4 10/10] firmware: add support for compressed images
Date: Wed, 16 Jun 2021 08:32:46 +0200	[thread overview]
Message-ID: <20210616063246.14900-10-s.trumtrar@pengutronix.de> (raw)
In-Reply-To: <20210616063246.14900-1-s.trumtrar@pengutronix.de>

At least bitstreams for FPGAs can consist of a lot of zeros depending on
device utilization. These bitstreams can be compressed very effectively.

Let the firmware code accept these images and decompress them before
handing it to the firmware-manager in question.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>

---

v3->v4: fix printf warning %s -> %d
v2->v3 - better error handling
       - fix free'ing and close'ing
       - remove O_CREAT for devicefd. Destination is always a device
         that shall be written with a firmware (FPGA etc). If it doesn't
         exist, creating it is useless.
---
 common/firmware.c | 52 +++++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 48 insertions(+), 4 deletions(-)

diff --git a/common/firmware.c b/common/firmware.c
index 58509d5da615..1d34090f0100 100644
--- a/common/firmware.c
+++ b/common/firmware.c
@@ -14,6 +14,8 @@
 #include <linux/list.h>
 #include <linux/stat.h>
 #include <linux/err.h>
+#include <uncompress.h>
+#include <filetype.h>
 
 #define BUFSIZ 4096
 
@@ -211,12 +213,54 @@ int firmwaremgr_register(struct firmware_handler *fh)
  */
 int firmwaremgr_load_file(struct firmware_mgr *mgr, const char *firmware)
 {
-	int ret;
-	char *name = basprintf("/dev/%s", mgr->handler->id);
+	char *dst;
+	enum filetype type;
+	int ret = 0;
+	int firmwarefd = 0;
+	int devicefd = 0;
+
+	if (!firmware)
+		return -EINVAL;
+
+	if (!mgr->handler->id) {
+		pr_err("id not defined for handler\n");
+		return -ENODEV;
+	}
+
+	dst = basprintf("/dev/%s", mgr->handler->id);
+
+	type = file_name_detect_type(firmware);
+
+	if (type == filetype_unknown) {
+		ret = copy_file(firmware, dst, 0);
+	} else {
+		firmwarefd = open(firmware, O_RDONLY);
+		if (firmwarefd < 0) {
+			printf("could not open %d: %s\n", firmwarefd,
+			       errno_str());
+			ret = firmwarefd;
+			goto out;
+		}
 
-	ret = copy_file(firmware, name, 0);
+		devicefd = open(dst, O_WRONLY);
+
+		if (devicefd < 0) {
+			printf("could not open %s: %s\n", dst, errno_str());
+			ret = devicefd;
+			goto out;
+		}
+
+		ret = uncompress_fd_to_fd(firmwarefd, devicefd,
+					  uncompress_err_stdout);
+	}
+
+out:
+	free(dst);
 
-	free(name);
+	if (firmwarefd > 0)
+		close(firmwarefd);
+	if (devicefd > 0)
+		close(devicefd);
 
 	return ret;
 }
-- 
2.29.2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


      parent reply	other threads:[~2021-06-16  6:34 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-16  6:32 [PATCH v4 01/10] reset: add of_reset_control_get to header Steffen Trumtrar
2021-06-16  6:32 ` [PATCH v4 02/10] drivers: add fpga bridge framework Steffen Trumtrar
2021-06-16  6:32 ` [PATCH v4 03/10] drivers: fpga: add socfpga bridges Steffen Trumtrar
2021-06-16  6:32 ` [PATCH v4 04/10] firmware: socfpga: change function prefixes Steffen Trumtrar
2021-06-16  6:32 ` [PATCH v4 05/10] firmware: import fpga-mgr.h from linux Steffen Trumtrar
2021-06-16  6:32 ` [PATCH v4 06/10] of: kconfig: of_overlay uses firmwaremgr_load_file Steffen Trumtrar
2021-06-16  6:32 ` [PATCH v4 07/10] of: of_firmware: add support for fpga bridges Steffen Trumtrar
2021-06-18  8:32   ` Steffen Trumtrar
2021-06-21  8:01     ` Sascha Hauer
2021-06-16  6:32 ` [PATCH v4 08/10] commands: firmwareload: allow loading firmware from dt Steffen Trumtrar
2021-06-22  9:08   ` Sascha Hauer
2021-06-16  6:32 ` [PATCH v4 09/10] drivers: firmware: socfpga: remove bridges shutdown Steffen Trumtrar
2021-06-16  6:32 ` Steffen Trumtrar [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210616063246.14900-10-s.trumtrar@pengutronix.de \
    --to=s.trumtrar@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox