From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [PATCH v2 24/29] watchdog: add StarFive watchdog driver
Date: Sat, 19 Jun 2021 06:50:50 +0200 [thread overview]
Message-ID: <20210619045055.779-25-a.fatoum@pengutronix.de> (raw)
In-Reply-To: <20210619045055.779-1-a.fatoum@pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
drivers/watchdog/Kconfig | 7 +++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/starfive_wdt.c | 106 ++++++++++++++++++++++++++++++++
3 files changed, 114 insertions(+)
create mode 100644 drivers/watchdog/starfive_wdt.c
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index b785181c59db..080bc91ff7f5 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -141,4 +141,11 @@ config ITCO_WDT
NO_REBOOT flag which prevents the watchdog from rebooting the
machine.
+config STARFIVE_WDT
+ tristate "StarFive Watchdog Timer"
+ depends on SOC_STARFIVE && OFDEVICE
+ help
+ If you say yes here you get support for the watchdog device
+ on StarFive SoCs.
+
endif
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 0b598af40218..4e784b5aaa30 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -18,3 +18,4 @@ obj-$(CONFIG_STPMIC1_WATCHDOG) += stpmic1_wdt.o
obj-$(CONFIG_F71808E_WDT) += f71808e_wdt.o
obj-$(CONFIG_GPIO_WATCHDOG) += gpio_wdt.o
obj-$(CONFIG_ITCO_WDT) += itco_wdt.o
+obj-$(CONFIG_STARFIVE_WDT) += starfive_wdt.o
diff --git a/drivers/watchdog/starfive_wdt.c b/drivers/watchdog/starfive_wdt.c
new file mode 100644
index 000000000000..6779566fd6c1
--- /dev/null
+++ b/drivers/watchdog/starfive_wdt.c
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2018 Kalray Inc.
+ */
+
+#include <common.h>
+#include <init.h>
+#include <io.h>
+#include <of.h>
+#include <watchdog.h>
+#include <linux/reset.h>
+
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#define WDT_REG_RESET_EN 0x104
+#define WDT_REG_TIMEOUT 0x108
+#define WDT_REG_CONTROL 0x110
+#define WDT_REG_UNLOCK 0x13c
+
+#define WDT_UNLOCK_KEY 0x378f0765
+
+#define WDT_TICKS_PER_SEC 50000000
+
+struct starfive_wdt {
+ u32 clk_rate;
+ struct watchdog wdd;
+ void __iomem *base;
+ bool setup;
+};
+
+static int starfive_wdt_set_timeout(struct watchdog *wdd, unsigned int timeout)
+{
+ struct starfive_wdt *wd = container_of(wdd, struct starfive_wdt, wdd);
+
+ writel(0, wd->base + WDT_REG_CONTROL);
+
+ if (timeout > 0) {
+ timeout *= wd->clk_rate;
+ writel(timeout, wd->base + WDT_REG_TIMEOUT);
+ writel(1, wd->base + WDT_REG_CONTROL);
+ }
+
+ return 0;
+}
+
+static int starfive_wdt_drv_probe(struct device_d *dev)
+{
+ struct starfive_wdt *wd;
+ struct resource *iores;
+ struct watchdog *wdd;
+ struct clk_bulk_data clks[] = {
+ { .id = "bus" },
+ { .id = "core" },
+ };
+ int ret;
+
+ ret = clk_bulk_get(dev, ARRAY_SIZE(clks), clks);
+ if (ret)
+ return ret;
+
+ ret = clk_bulk_enable(ARRAY_SIZE(clks), clks);
+ if (ret < 0)
+ return ret;
+
+ ret = device_reset_all(dev);
+ if (ret)
+ return ret;
+
+ iores = dev_request_mem_resource(dev, 0);
+ if (IS_ERR(iores))
+ return PTR_ERR(iores);
+
+ wd = xzalloc(sizeof(*wd));
+ wd->base = IOMEM(iores->start);
+
+ wd->clk_rate = WDT_TICKS_PER_SEC;
+
+ writel(WDT_UNLOCK_KEY, wd->base + WDT_REG_UNLOCK);
+ wd->base = IOMEM(iores->start);
+ /* reset, not interrupt, on timer expiry */
+ writel(1, wd->base + WDT_REG_RESET_EN);
+
+ wdd = &wd->wdd;
+ wdd->name = "starfive_wdt";
+ wdd->hwdev = dev;
+ wdd->set_timeout = starfive_wdt_set_timeout;
+ wdd->timeout_max = U32_MAX / wd->clk_rate;
+
+ wdd->running = readl(wd->base + WDT_REG_CONTROL) & 1 ?
+ WDOG_HW_RUNNING : WDOG_HW_NOT_RUNNING;
+
+ return watchdog_register(wdd);
+}
+
+static struct of_device_id starfive_wdt_of_match[] = {
+ { .compatible = "starfive,wdt", },
+ { /* sentinel */ }
+};
+
+static struct driver_d starfive_wdt_driver = {
+ .name = "starfive-wdt",
+ .probe = starfive_wdt_drv_probe,
+ .of_compatible = starfive_wdt_of_match,
+};
+device_platform_driver(starfive_wdt_driver);
--
2.29.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2021-06-19 4:54 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-19 4:50 [PATCH v2 00/29] RISC-V: add BeagleV Beta board support Ahmad Fatoum
2021-06-19 4:50 ` [PATCH v2 01/29] clocksource: RISC-V: demote probe success messages to debug level Ahmad Fatoum
2021-06-19 4:50 ` [PATCH v2 02/29] RISC-V: virt: select only one timer Ahmad Fatoum
2021-06-19 4:50 ` [PATCH v2 03/29] RISC-V: extend multi-image to support both S- and M-Mode Ahmad Fatoum
2021-06-19 4:50 ` [PATCH v2 04/29] RISC-V: cpuinfo: return some output for non-SBI systems as well Ahmad Fatoum
2021-06-19 4:50 ` [PATCH v2 05/29] RISC-V: S-Mode: propagate Hart ID Ahmad Fatoum
2021-06-19 4:50 ` [PATCH v2 06/29] RISC-V: erizo: make it easier to reuse ns16550 debug_ll Ahmad Fatoum
2021-06-19 4:50 ` [PATCH v2 07/29] RISC-V: socs: add Kconfig entry for StarFive JH7100 Ahmad Fatoum
2021-06-19 4:50 ` [PATCH v2 08/29] nvmem: add StarFive OTP support Ahmad Fatoum
2021-06-19 4:50 ` [PATCH v2 09/29] RISC-V: dma: support multiple dma_alloc_coherent backends Ahmad Fatoum
2021-06-19 4:50 ` [PATCH v2 10/29] RISC-V: add exception support Ahmad Fatoum
2021-06-19 4:50 ` [PATCH v2 11/29] RISC-V: support incoherent I-Cache Ahmad Fatoum
2021-06-19 4:50 ` [PATCH v2 12/29] drivers: soc: sifive: add basic L2 cache controller driver Ahmad Fatoum
2021-06-19 4:50 ` [PATCH v2 13/29] soc: starfive: add support for JH7100 incoherent interconnect Ahmad Fatoum
2021-06-19 4:50 ` [PATCH v2 14/29] soc: sifive: l2_cache: enable maximum available cache ways Ahmad Fatoum
2021-06-19 4:50 ` [PATCH v2 15/29] net: designware: fix non-1:1 mapped 64-bit systems Ahmad Fatoum
2021-06-21 7:25 ` Sascha Hauer
2021-06-21 7:33 ` Ahmad Fatoum
2021-06-19 4:50 ` [PATCH v2 16/29] net: designware: add support for IP integrated into StarFive SoC Ahmad Fatoum
2021-06-19 4:50 ` [PATCH v2 17/29] mci: allocate DMA-able memory Ahmad Fatoum
2021-06-19 4:50 ` [PATCH v2 18/29] mci: allocate sector_buf on demand Ahmad Fatoum
2021-06-19 4:50 ` [PATCH v2 19/29] dma: allocate 32-byte aligned buffers by default Ahmad Fatoum
2021-06-19 4:50 ` [PATCH v2 20/29] mci: dw_mmc: add optional reset line Ahmad Fatoum
2021-06-19 4:50 ` [PATCH v2 21/29] mci: dw_mmc: match against StarFive MMC compatibles Ahmad Fatoum
2021-06-19 4:50 ` [PATCH v2 22/29] clk: add initial StarFive clock support Ahmad Fatoum
2021-06-19 4:50 ` [PATCH v2 23/29] reset: add StarFive reset controller driver Ahmad Fatoum
2021-06-19 4:50 ` Ahmad Fatoum [this message]
2021-06-19 4:50 ` [PATCH v2 25/29] hw_random: add driver for RNG on StarFive SoC Ahmad Fatoum
2021-06-19 4:50 ` [PATCH v2 26/29] reset: add device_reset_all helper Ahmad Fatoum
2021-06-19 4:50 ` [PATCH v2 27/29] gpio: add support for StarFive GPIO controller Ahmad Fatoum
2021-06-19 4:50 ` [PATCH v2 28/29] misc: add power sequencing driver for initializing StarFive peripherals Ahmad Fatoum
2021-06-19 4:50 ` [PATCH v2 29/29] RISC-V: StarFive: add board support for BeagleV Starlight Ahmad Fatoum
2021-06-21 9:11 ` [PATCH v2 00/29] RISC-V: add BeagleV Beta board support Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210619045055.779-25-a.fatoum@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox