From: Rouven Czerwinski <r.czerwinski@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Subject: [PATCH v2 5/8] of: add reserved_mem_read initcall
Date: Tue, 3 Aug 2021 11:44:15 +0200 [thread overview]
Message-ID: <20210803094418.475609-6-r.czerwinski@pengutronix.de> (raw)
In-Reply-To: <20210803094418.475609-1-r.czerwinski@pengutronix.de>
Add a reserved_mem_read initcall which parses the reserved-memory
entries and adds barebox of reserve entries. Also remove the OP-TEE size
of reserve entry, since this is now parsed from the DT and does not need
to be statically configured any longer.
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
---
drivers/of/Makefile | 1 +
drivers/of/reserved-mem.c | 43 +++++++++++++++++++++++++++++++++++++++
2 files changed, 44 insertions(+)
create mode 100644 drivers/of/reserved-mem.c
diff --git a/drivers/of/Makefile b/drivers/of/Makefile
index b6847752d2..b69cb84b99 100644
--- a/drivers/of/Makefile
+++ b/drivers/of/Makefile
@@ -4,6 +4,7 @@ obj-$(CONFIG_OF_GPIO) += of_gpio.o
obj-$(CONFIG_OF_PCI) += of_pci.o
obj-y += partition.o
obj-y += of_net.o
+obj-$(CONFIG_OFDEVICE) += reserved-mem.o
obj-$(CONFIG_MTD) += of_mtd.o
obj-$(CONFIG_OF_BAREBOX_DRIVERS) += barebox.o
obj-$(CONFIG_OF_OVERLAY) += overlay.o resolver.o of_firmware.o
diff --git a/drivers/of/reserved-mem.c b/drivers/of/reserved-mem.c
new file mode 100644
index 0000000000..8519a7e3dd
--- /dev/null
+++ b/drivers/of/reserved-mem.c
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// SPDX-FileCopyrightText: 2021 Rouven Czerwinski <r.czerwinski@pengutronix.de>, Pengutronix
+
+#define pr_fmt(fmt) "reserved-memory: " fmt
+
+#define DEBUG
+
+#include <common.h>
+#include <init.h>
+#include <of.h>
+#include <of_address.h>
+#include <malloc.h>
+#include <partition.h>
+
+static int reserved_mem_read(void)
+{
+ struct device_node *node, *child;
+ struct resource resource;
+ int flag;
+
+ node = of_find_node_by_path("/reserved-memory");
+ if (!node)
+ return 0;
+
+ for_each_child_of_node(node, child) {
+ flag = OF_RESERVE_ENTRY_FLAG_NO_RESERVE;
+
+ of_address_to_resource(child, 0, &resource);
+
+ pr_err("Res-Mem start: 0x%08x\n", resource.start);
+ pr_err("Res-Mem end: 0x%08x\n", resource.end);
+
+ if (of_find_property(child, "no-map", 0)) {
+ pr_debug("child %p: no-map\n", child);
+ flag |= OF_RESERVE_ENTRY_FLAG_XN;
+ }
+
+ of_add_reserve_entry(resource.start, resource.end, flag);
+ }
+
+ return 0;
+}
+postconsole_initcall(reserved_mem_read);
--
2.32.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2021-08-03 9:46 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-03 9:44 [PATCH v2 0/8] XN Support for reserved-memory areas Rouven Czerwinski
2021-08-03 9:44 ` [PATCH v2 1/8] of: reserve: add xn flag mem entries Rouven Czerwinski
2021-08-05 13:54 ` Ahmad Fatoum
2021-08-09 18:26 ` Sascha Hauer
2021-08-03 9:44 ` [PATCH v2 2/8] of: add of_get_reserve_map stub for !CONFIG_OFTREE Rouven Czerwinski
2021-08-05 13:55 ` Ahmad Fatoum
2021-08-03 9:44 ` [PATCH v2 3/8] ARM: mmu: use reserve mem entries to modify maps Rouven Czerwinski
2021-08-05 14:06 ` Ahmad Fatoum
2021-08-09 18:30 ` Sascha Hauer
2021-08-24 7:09 ` Ahmad Fatoum
2021-08-03 9:44 ` [PATCH v2 4/8] of: add flag to not create resmem DT entries Rouven Czerwinski
2021-08-05 14:09 ` Ahmad Fatoum
2021-08-03 9:44 ` Rouven Czerwinski [this message]
2021-08-05 14:14 ` [PATCH v2 5/8] of: add reserved_mem_read initcall Ahmad Fatoum
2021-08-03 9:44 ` [PATCH v2 6/8] pbl: fdt: add support to parse reserved mem Rouven Czerwinski
2021-08-05 14:20 ` Ahmad Fatoum
2021-08-03 9:44 ` [PATCH v2 7/8] ARM: mmu-early: map no-map entries XN & uncached Rouven Czerwinski
2021-08-05 14:24 ` Ahmad Fatoum
2021-08-03 9:44 ` [PATCH v2 8/8] PBL: enable LIBFDT for OP-TEE early loading Rouven Czerwinski
2021-08-05 13:53 ` Ahmad Fatoum
2021-08-24 6:47 ` Rouven Czerwinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210803094418.475609-6-r.czerwinski@pengutronix.de \
--to=r.czerwinski@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox