From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [PATCH 1/5] net: drop Calxeda Highbank xgmac driver support
Date: Thu, 12 Aug 2021 14:19:40 +0200 [thread overview]
Message-ID: <20210812121944.4419-1-a.fatoum@pengutronix.de> (raw)
Support for MACH_HIGHBANK was removed in f0f96c3322d5
("ARM: remove Calxeda Highbank support"). There are no device trees
either barebox or upstream using this network controller, so remove
the driver as well.
Fixes: f0f96c3322d5 ("ARM: remove Calxeda Highbank support")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
drivers/net/Kconfig | 4 -
drivers/net/Makefile | 1 -
drivers/net/xgmac.c | 734 -------------------------------------------
3 files changed, 739 deletions(-)
delete mode 100644 drivers/net/xgmac.c
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 802169a86e8c..4a290bebbd75 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -39,10 +39,6 @@ config DRIVER_NET_AT91_ETHER
depends on HAS_AT91_ETHER
select PHYLIB
-config DRIVER_NET_CALXEDA_XGMAC
- bool "Calxeda xgmac"
- depends on HAS_DMA
-
config DRIVER_NET_CS8900
bool "cs8900 ethernet driver"
depends on HAS_CS8900 || COMPILE_TEST
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index fb3e3bdee46a..e5eede634e63 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -4,7 +4,6 @@ obj-$(CONFIG_NET_USB) += usb/
obj-$(CONFIG_DRIVER_NET_AR231X) += ar231x.o
obj-$(CONFIG_DRIVER_NET_ARC_EMAC) += arc_emac.o
obj-$(CONFIG_DRIVER_NET_AT91_ETHER) += at91_ether.o
-obj-$(CONFIG_DRIVER_NET_CALXEDA_XGMAC) += xgmac.o
obj-$(CONFIG_DRIVER_NET_CS8900) += cs8900.o
obj-$(CONFIG_DRIVER_NET_CPSW) += cpsw.o
obj-$(CONFIG_DRIVER_NET_DAVINCI_EMAC) += davinci_emac.o
diff --git a/drivers/net/xgmac.c b/drivers/net/xgmac.c
deleted file mode 100644
index 136d78804349..000000000000
--- a/drivers/net/xgmac.c
+++ /dev/null
@@ -1,734 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2010-2011 Calxeda, Inc.
- */
-
-#include <common.h>
-#include <dma.h>
-#include <net.h>
-#include <clock.h>
-#include <malloc.h>
-#include <xfuncs.h>
-#include <init.h>
-#include <errno.h>
-#include <io.h>
-#include <linux/err.h>
-
-#define TX_NUM_DESC 1
-#define RX_NUM_DESC 32
-
-#define ETH_BUF_SZ 2048
-#define TX_BUF_SZ (ETH_BUF_SZ * TX_NUM_DESC)
-#define RX_BUF_SZ (ETH_BUF_SZ * RX_NUM_DESC)
-
-/* XGMAC Register definitions */
-#define XGMAC_CONTROL 0x00000000 /* MAC Configuration */
-#define XGMAC_FRAME_FILTER 0x00000004 /* MAC Frame Filter */
-#define XGMAC_FLOW_CTRL 0x00000018 /* MAC Flow Control */
-#define XGMAC_VLAN_TAG 0x0000001C /* VLAN Tags */
-#define XGMAC_VERSION 0x00000020 /* Version */
-#define XGMAC_VLAN_INCL 0x00000024 /* VLAN tag for tx frames */
-#define XGMAC_LPI_CTRL 0x00000028 /* LPI Control and Status */
-#define XGMAC_LPI_TIMER 0x0000002C /* LPI Timers Control */
-#define XGMAC_TX_PACE 0x00000030 /* Transmit Pace and Stretch */
-#define XGMAC_VLAN_HASH 0x00000034 /* VLAN Hash Table */
-#define XGMAC_DEBUG 0x00000038 /* Debug */
-#define XGMAC_INT_STAT 0x0000003C /* Interrupt and Control */
-#define XGMAC_ADDR_HIGH(reg) (0x00000040 + ((reg) * 8))
-#define XGMAC_ADDR_LOW(reg) (0x00000044 + ((reg) * 8))
-#define XGMAC_HASH(n) (0x00000300 + (n) * 4) /* HASH table regs */
-#define XGMAC_NUM_HASH 16
-#define XGMAC_OMR 0x00000400
-#define XGMAC_REMOTE_WAKE 0x00000700 /* Remote Wake-Up Frm Filter */
-#define XGMAC_PMT 0x00000704 /* PMT Control and Status */
-#define XGMAC_MMC_CTRL 0x00000800 /* XGMAC MMC Control */
-#define XGMAC_MMC_INTR_RX 0x00000804 /* Recieve Interrupt */
-#define XGMAC_MMC_INTR_TX 0x00000808 /* Transmit Interrupt */
-#define XGMAC_MMC_INTR_MASK_RX 0x0000080c /* Recieve Interrupt Mask */
-#define XGMAC_MMC_INTR_MASK_TX 0x00000810 /* Transmit Interrupt Mask */
-
-
-/* Hardware TX Statistics Counters */
-#define XGMAC_MMC_TXOCTET_GB_LO 0x00000814
-#define XGMAC_MMC_TXOCTET_GB_HI 0x00000818
-#define XGMAC_MMC_TXFRAME_GB_LO 0x0000081C
-#define XGMAC_MMC_TXFRAME_GB_HI 0x00000820
-#define XGMAC_MMC_TXBCFRAME_G 0x00000824
-#define XGMAC_MMC_TXMCFRAME_G 0x0000082C
-#define XGMAC_MMC_TXUCFRAME_GB 0x00000864
-#define XGMAC_MMC_TXMCFRAME_GB 0x0000086C
-#define XGMAC_MMC_TXBCFRAME_GB 0x00000874
-#define XGMAC_MMC_TXUNDERFLOW 0x0000087C
-#define XGMAC_MMC_TXOCTET_G_LO 0x00000884
-#define XGMAC_MMC_TXOCTET_G_HI 0x00000888
-#define XGMAC_MMC_TXFRAME_G_LO 0x0000088C
-#define XGMAC_MMC_TXFRAME_G_HI 0x00000890
-#define XGMAC_MMC_TXPAUSEFRAME 0x00000894
-#define XGMAC_MMC_TXVLANFRAME 0x0000089C
-
-/* Hardware RX Statistics Counters */
-#define XGMAC_MMC_RXFRAME_GB_LO 0x00000900
-#define XGMAC_MMC_RXFRAME_GB_HI 0x00000904
-#define XGMAC_MMC_RXOCTET_GB_LO 0x00000908
-#define XGMAC_MMC_RXOCTET_GB_HI 0x0000090C
-#define XGMAC_MMC_RXOCTET_G_LO 0x00000910
-#define XGMAC_MMC_RXOCTET_G_HI 0x00000914
-#define XGMAC_MMC_RXBCFRAME_G 0x00000918
-#define XGMAC_MMC_RXMCFRAME_G 0x00000920
-#define XGMAC_MMC_RXCRCERR 0x00000928
-#define XGMAC_MMC_RXRUNT 0x00000930
-#define XGMAC_MMC_RXJABBER 0x00000934
-#define XGMAC_MMC_RXUCFRAME_G 0x00000970
-#define XGMAC_MMC_RXLENGTHERR 0x00000978
-#define XGMAC_MMC_RXPAUSEFRAME 0x00000988
-#define XGMAC_MMC_RXOVERFLOW 0x00000990
-#define XGMAC_MMC_RXVLANFRAME 0x00000998
-#define XGMAC_MMC_RXWATCHDOG 0x000009a0
-
-/* DMA Control and Status Registers */
-#define XGMAC_DMA_BUS_MODE 0x00000f00 /* Bus Mode */
-#define XGMAC_DMA_TX_POLL 0x00000f04 /* Transmit Poll Demand */
-#define XGMAC_DMA_RX_POLL 0x00000f08 /* Received Poll Demand */
-#define XGMAC_DMA_RX_BASE_ADDR 0x00000f0c /* Receive List Base */
-#define XGMAC_DMA_TX_BASE_ADDR 0x00000f10 /* Transmit List Base */
-#define XGMAC_DMA_STATUS 0x00000f14 /* Status Register */
-#define XGMAC_DMA_CONTROL 0x00000f18 /* Ctrl (Operational Mode) */
-#define XGMAC_DMA_INTR_ENA 0x00000f1c /* Interrupt Enable */
-#define XGMAC_DMA_MISS_FRAME_CTR 0x00000f20 /* Missed Frame Counter */
-#define XGMAC_DMA_RI_WDOG_TIMER 0x00000f24 /* RX Intr Watchdog Timer */
-#define XGMAC_DMA_AXI_BUS 0x00000f28 /* AXI Bus Mode */
-#define XGMAC_DMA_AXI_STATUS 0x00000f2C /* AXI Status */
-#define XGMAC_DMA_HW_FEATURE 0x00000f58 /* Enabled Hardware Features */
-
-#define XGMAC_ADDR_AE 0x80000000
-#define XGMAC_MAX_FILTER_ADDR 31
-
-/* PMT Control and Status */
-#define XGMAC_PMT_POINTER_RESET 0x80000000
-#define XGMAC_PMT_GLBL_UNICAST 0x00000200
-#define XGMAC_PMT_WAKEUP_RX_FRM 0x00000040
-#define XGMAC_PMT_MAGIC_PKT 0x00000020
-#define XGMAC_PMT_WAKEUP_FRM_EN 0x00000004
-#define XGMAC_PMT_MAGIC_PKT_EN 0x00000002
-#define XGMAC_PMT_POWERDOWN 0x00000001
-
-#define XGMAC_CONTROL_SPD 0x40000000 /* Speed control */
-#define XGMAC_CONTROL_SPD_MASK 0x60000000
-#define XGMAC_CONTROL_SPD_1G 0x60000000
-#define XGMAC_CONTROL_SPD_2_5G 0x40000000
-#define XGMAC_CONTROL_SPD_10G 0x00000000
-#define XGMAC_CONTROL_SARC 0x10000000 /* Source Addr Insert/Replace */
-#define XGMAC_CONTROL_SARK_MASK 0x18000000
-#define XGMAC_CONTROL_CAR 0x04000000 /* CRC Addition/Replacement */
-#define XGMAC_CONTROL_CAR_MASK 0x06000000
-#define XGMAC_CONTROL_DP 0x01000000 /* Disable Padding */
-#define XGMAC_CONTROL_WD 0x00800000 /* Disable Watchdog on rx */
-#define XGMAC_CONTROL_JD 0x00400000 /* Jabber disable */
-#define XGMAC_CONTROL_JE 0x00100000 /* Jumbo frame */
-#define XGMAC_CONTROL_LM 0x00001000 /* Loop-back mode */
-#define XGMAC_CONTROL_IPC 0x00000400 /* Checksum Offload */
-#define XGMAC_CONTROL_ACS 0x00000080 /* Automatic Pad/FCS Strip */
-#define XGMAC_CONTROL_DDIC 0x00000010 /* Disable Deficit Idle Count */
-#define XGMAC_CONTROL_TE 0x00000008 /* Transmitter Enable */
-#define XGMAC_CONTROL_RE 0x00000004 /* Receiver Enable */
-
-/* XGMAC Frame Filter defines */
-#define XGMAC_FRAME_FILTER_PR 0x00000001 /* Promiscuous Mode */
-#define XGMAC_FRAME_FILTER_HUC 0x00000002 /* Hash Unicast */
-#define XGMAC_FRAME_FILTER_HMC 0x00000004 /* Hash Multicast */
-#define XGMAC_FRAME_FILTER_DAIF 0x00000008 /* DA Inverse Filtering */
-#define XGMAC_FRAME_FILTER_PM 0x00000010 /* Pass all multicast */
-#define XGMAC_FRAME_FILTER_DBF 0x00000020 /* Disable Broadcast frames */
-#define XGMAC_FRAME_FILTER_SAIF 0x00000100 /* Inverse Filtering */
-#define XGMAC_FRAME_FILTER_SAF 0x00000200 /* Source Address Filter */
-#define XGMAC_FRAME_FILTER_HPF 0x00000400 /* Hash or perfect Filter */
-#define XGMAC_FRAME_FILTER_VHF 0x00000800 /* VLAN Hash Filter */
-#define XGMAC_FRAME_FILTER_VPF 0x00001000 /* VLAN Perfect Filter */
-#define XGMAC_FRAME_FILTER_RA 0x80000000 /* Receive all mode */
-
-#define FIFO_MINUS_1K 0x0
-#define FIFO_MINUS_2K 0x1
-#define FIFO_MINUS_3K 0x2
-#define FIFO_MINUS_4K 0x3
-#define FIFO_MINUS_6K 0x4
-#define FIFO_MINUS_8K 0x5
-#define FIFO_MINUS_12K 0x6
-#define FIFO_MINUS_16K 0x7
-
-/* XGMAC FLOW CTRL defines */
-#define XGMAC_FLOW_CTRL_PT_MASK 0xffff0000 /* Pause Time Mask */
-#define XGMAC_FLOW_CTRL_PT_SHIFT 16
-#define XGMAC_FLOW_CTRL_DZQP 0x00000080 /* Disable Zero-Quanta Phase */
-#define XGMAC_FLOW_CTRL_PLT 0x00000020 /* Pause Low Threshhold */
-#define XGMAC_FLOW_CTRL_PLT_SHIFT 4
-#define XGMAC_FLOW_CTRL_PLT_MASK 0x00000030 /* PLT MASK */
-#define XGMAC_FLOW_CTRL_UP 0x00000008 /* Unicast Pause Frame Detect */
-#define XGMAC_FLOW_CTRL_RFE 0x00000004 /* Rx Flow Control Enable */
-#define XGMAC_FLOW_CTRL_TFE 0x00000002 /* Tx Flow Control Enable */
-#define XGMAC_FLOW_CTRL_FCB_BPA 0x00000001 /* Flow Control Busy ... */
-
-/* XGMAC_INT_STAT reg */
-#define XGMAC_INT_STAT_PMT 0x0080 /* PMT Interrupt Status */
-#define XGMAC_INT_STAT_LPI 0x0040 /* LPI Interrupt Status */
-
-/* DMA Bus Mode register defines */
-#define DMA_BUS_MODE_SFT_RESET 0x00000001 /* Software Reset */
-#define DMA_BUS_MODE_DSL_MASK 0x0000007c /* Descriptor Skip Length */
-#define DMA_BUS_MODE_DSL_SHIFT 2 /* (in DWORDS) */
-#define DMA_BUS_MODE_ATDS 0x00000080 /* Alternate Descriptor Size */
-
-/* Programmable burst length */
-#define DMA_BUS_MODE_PBL_MASK 0x00003f00 /* Programmable Burst Len */
-#define DMA_BUS_MODE_PBL_SHIFT 8
-#define DMA_BUS_MODE_FB 0x00010000 /* Fixed burst */
-#define DMA_BUS_MODE_RPBL_MASK 0x003e0000 /* Rx-Programmable Burst Len */
-#define DMA_BUS_MODE_RPBL_SHIFT 17
-#define DMA_BUS_MODE_USP 0x00800000
-#define DMA_BUS_MODE_8PBL 0x01000000
-#define DMA_BUS_MODE_AAL 0x02000000
-
-#define DMA_AXIMODE_ENLPI 0x80000000
-#define DMA_AXIMODE_MGK 0x40000000
-#define DMA_AXIMODE_WROSR 0x00100000
-#define DMA_AXIMODE_WROSR_MASK 0x00F00000
-#define DMA_AXIMODE_WROSR_SHIFT 20
-#define DMA_AXIMODE_RDOSR 0x00010000
-#define DMA_AXIMODE_RDOSR_MASK 0x000F0000
-#define DMA_AXIMODE_RDOSR_SHIFT 16
-#define DMA_AXIMODE_AAL 0x00001000
-#define DMA_AXIMODE_BLEN256 0x00000080
-#define DMA_AXIMODE_BLEN128 0x00000040
-#define DMA_AXIMODE_BLEN64 0x00000020
-#define DMA_AXIMODE_BLEN32 0x00000010
-#define DMA_AXIMODE_BLEN16 0x00000008
-#define DMA_AXIMODE_BLEN8 0x00000004
-#define DMA_AXIMODE_BLEN4 0x00000002
-#define DMA_AXIMODE_UNDEF 0x00000001
-
-/* DMA Bus Mode register defines */
-#define DMA_BUS_PR_RATIO_MASK 0x0000c000 /* Rx/Tx priority ratio */
-#define DMA_BUS_PR_RATIO_SHIFT 14
-#define DMA_BUS_FB 0x00010000 /* Fixed Burst */
-
-/* DMA Control register defines */
-#define DMA_CONTROL_ST 0x00002000 /* Start/Stop Transmission */
-#define DMA_CONTROL_SR 0x00000002 /* Start/Stop Receive */
-#define DMA_CONTROL_DFF 0x01000000 /* Disable flush of rx frames */
-
-/* DMA Normal interrupt */
-#define DMA_INTR_ENA_NIE 0x00010000 /* Normal Summary */
-#define DMA_INTR_ENA_AIE 0x00008000 /* Abnormal Summary */
-#define DMA_INTR_ENA_ERE 0x00004000 /* Early Receive */
-#define DMA_INTR_ENA_FBE 0x00002000 /* Fatal Bus Error */
-#define DMA_INTR_ENA_ETE 0x00000400 /* Early Transmit */
-#define DMA_INTR_ENA_RWE 0x00000200 /* Receive Watchdog */
-#define DMA_INTR_ENA_RSE 0x00000100 /* Receive Stopped */
-#define DMA_INTR_ENA_RUE 0x00000080 /* Receive Buffer Unavailable */
-#define DMA_INTR_ENA_RIE 0x00000040 /* Receive Interrupt */
-#define DMA_INTR_ENA_UNE 0x00000020 /* Tx Underflow */
-#define DMA_INTR_ENA_OVE 0x00000010 /* Receive Overflow */
-#define DMA_INTR_ENA_TJE 0x00000008 /* Transmit Jabber */
-#define DMA_INTR_ENA_TUE 0x00000004 /* Transmit Buffer Unavail */
-#define DMA_INTR_ENA_TSE 0x00000002 /* Transmit Stopped */
-#define DMA_INTR_ENA_TIE 0x00000001 /* Transmit Interrupt */
-
-#define DMA_INTR_NORMAL (DMA_INTR_ENA_NIE | DMA_INTR_ENA_RIE | \
- DMA_INTR_ENA_TUE)
-
-#define DMA_INTR_ABNORMAL (DMA_INTR_ENA_AIE | DMA_INTR_ENA_FBE | \
- DMA_INTR_ENA_RWE | DMA_INTR_ENA_RSE | \
- DMA_INTR_ENA_RUE | DMA_INTR_ENA_UNE | \
- DMA_INTR_ENA_OVE | DMA_INTR_ENA_TJE | \
- DMA_INTR_ENA_TSE)
-
-/* DMA default interrupt mask */
-#define DMA_INTR_DEFAULT_MASK (DMA_INTR_NORMAL | DMA_INTR_ABNORMAL)
-
-/* DMA Status register defines */
-#define DMA_STATUS_GMI 0x08000000 /* MMC interrupt */
-#define DMA_STATUS_GLI 0x04000000 /* GMAC Line interface int */
-#define DMA_STATUS_EB_MASK 0x00380000 /* Error Bits Mask */
-#define DMA_STATUS_EB_TX_ABORT 0x00080000 /* Error Bits - TX Abort */
-#define DMA_STATUS_EB_RX_ABORT 0x00100000 /* Error Bits - RX Abort */
-#define DMA_STATUS_TS_MASK 0x00700000 /* Transmit Process State */
-#define DMA_STATUS_TS_SHIFT 20
-#define DMA_STATUS_RS_MASK 0x000e0000 /* Receive Process State */
-#define DMA_STATUS_RS_SHIFT 17
-#define DMA_STATUS_NIS 0x00010000 /* Normal Interrupt Summary */
-#define DMA_STATUS_AIS 0x00008000 /* Abnormal Interrupt Summary */
-#define DMA_STATUS_ERI 0x00004000 /* Early Receive Interrupt */
-#define DMA_STATUS_FBI 0x00002000 /* Fatal Bus Error Interrupt */
-#define DMA_STATUS_ETI 0x00000400 /* Early Transmit Interrupt */
-#define DMA_STATUS_RWT 0x00000200 /* Receive Watchdog Timeout */
-#define DMA_STATUS_RPS 0x00000100 /* Receive Process Stopped */
-#define DMA_STATUS_RU 0x00000080 /* Receive Buffer Unavailable */
-#define DMA_STATUS_RI 0x00000040 /* Receive Interrupt */
-#define DMA_STATUS_UNF 0x00000020 /* Transmit Underflow */
-#define DMA_STATUS_OVF 0x00000010 /* Receive Overflow */
-#define DMA_STATUS_TJT 0x00000008 /* Transmit Jabber Timeout */
-#define DMA_STATUS_TU 0x00000004 /* Transmit Buffer Unavail */
-#define DMA_STATUS_TPS 0x00000002 /* Transmit Process Stopped */
-#define DMA_STATUS_TI 0x00000001 /* Transmit Interrupt */
-
-/* Common MAC defines */
-#define MAC_ENABLE_TX 0x00000008 /* Transmitter Enable */
-#define MAC_ENABLE_RX 0x00000004 /* Receiver Enable */
-
-/* XGMAC Operation Mode Register */
-#define XGMAC_OMR_TSF 0x00200000 /* TX FIFO Store and Forward */
-#define XGMAC_OMR_FTF 0x00100000 /* Flush Transmit FIFO */
-#define XGMAC_OMR_TTC 0x00020000 /* Transmit Threshhold Ctrl */
-#define XGMAC_OMR_TTC_SHIFT 16
-#define XGMAC_OMR_TTC_MASK 0x00030000
-#define XGMAC_OMR_RFD 0x00006000 /* FC Deactivation Threshhold */
-#define XGMAC_OMR_RFD_SHIFT 12
-#define XGMAC_OMR_RFD_MASK 0x00007000 /* FC Deact Threshhold MASK */
-#define XGMAC_OMR_RFA 0x00000600 /* FC Activation Threshhold */
-#define XGMAC_OMR_RFA_SHIFT 9
-#define XGMAC_OMR_RFA_MASK 0x00000E00 /* FC Act Threshhold MASK */
-#define XGMAC_OMR_EFC 0x00000100 /* Enable Hardware FC */
-#define XGMAC_OMR_FEF 0x00000080 /* Forward Error Frames */
-#define XGMAC_OMR_DT 0x00000040 /* Drop TCP/IP csum Errors */
-#define XGMAC_OMR_RSF 0x00000020 /* RX FIFO Store and Forward */
-#define XGMAC_OMR_RTC_256 0x00000018 /* RX Threshhold Ctrl */
-#define XGMAC_OMR_RTC_MASK 0x00000018 /* RX Threshhold Ctrl MASK */
-
-/* XGMAC HW Features Register */
-#define DMA_HW_FEAT_TXCOESEL 0x00010000 /* TX Checksum offload */
-
-#define XGMAC_MMC_CTRL_CNT_FRZ 0x00000008
-
-/* XGMAC Descriptor Defines */
-#define MAX_DESC_BUF_SZ (0x2000 - 8)
-
-#define RXDESC_EXT_STATUS 0x00000001
-#define RXDESC_CRC_ERR 0x00000002
-#define RXDESC_RX_ERR 0x00000008
-#define RXDESC_RX_WDOG 0x00000010
-#define RXDESC_FRAME_TYPE 0x00000020
-#define RXDESC_GIANT_FRAME 0x00000080
-#define RXDESC_LAST_SEG 0x00000100
-#define RXDESC_FIRST_SEG 0x00000200
-#define RXDESC_VLAN_FRAME 0x00000400
-#define RXDESC_OVERFLOW_ERR 0x00000800
-#define RXDESC_LENGTH_ERR 0x00001000
-#define RXDESC_SA_FILTER_FAIL 0x00002000
-#define RXDESC_DESCRIPTOR_ERR 0x00004000
-#define RXDESC_ERROR_SUMMARY 0x00008000
-#define RXDESC_FRAME_LEN_OFFSET 16
-#define RXDESC_FRAME_LEN_MASK 0x3fff0000
-#define RXDESC_DA_FILTER_FAIL 0x40000000
-
-#define RXDESC1_END_RING 0x00008000
-
-#define RXDESC_IP_PAYLOAD_MASK 0x00000003
-#define RXDESC_IP_PAYLOAD_UDP 0x00000001
-#define RXDESC_IP_PAYLOAD_TCP 0x00000002
-#define RXDESC_IP_PAYLOAD_ICMP 0x00000003
-#define RXDESC_IP_HEADER_ERR 0x00000008
-#define RXDESC_IP_PAYLOAD_ERR 0x00000010
-#define RXDESC_IPV4_PACKET 0x00000040
-#define RXDESC_IPV6_PACKET 0x00000080
-#define TXDESC_UNDERFLOW_ERR 0x00000001
-#define TXDESC_JABBER_TIMEOUT 0x00000002
-#define TXDESC_LOCAL_FAULT 0x00000004
-#define TXDESC_REMOTE_FAULT 0x00000008
-#define TXDESC_VLAN_FRAME 0x00000010
-#define TXDESC_FRAME_FLUSHED 0x00000020
-#define TXDESC_IP_HEADER_ERR 0x00000040
-#define TXDESC_PAYLOAD_CSUM_ERR 0x00000080
-#define TXDESC_ERROR_SUMMARY 0x00008000
-#define TXDESC_SA_CTRL_INSERT 0x00040000
-#define TXDESC_SA_CTRL_REPLACE 0x00080000
-#define TXDESC_2ND_ADDR_CHAINED 0x00100000
-#define TXDESC_END_RING 0x00200000
-#define TXDESC_CSUM_IP 0x00400000
-#define TXDESC_CSUM_IP_PAYLD 0x00800000
-#define TXDESC_CSUM_ALL 0x00C00000
-#define TXDESC_CRC_EN_REPLACE 0x01000000
-#define TXDESC_CRC_EN_APPEND 0x02000000
-#define TXDESC_DISABLE_PAD 0x04000000
-#define TXDESC_FIRST_SEG 0x10000000
-#define TXDESC_LAST_SEG 0x20000000
-#define TXDESC_INTERRUPT 0x40000000
-
-#define DESC_OWN 0x80000000
-#define DESC_BUFFER1_SZ_MASK 0x00001fff
-#define DESC_BUFFER2_SZ_MASK 0x1fff0000
-#define DESC_BUFFER2_SZ_OFFSET 16
-
-struct xgmac_dma_desc {
- __le32 flags;
- __le32 buf_size;
- __le32 buf1_addr; /* Buffer 1 Address Pointer */
- __le32 buf2_addr; /* Buffer 2 Address Pointer */
- __le32 ext_status;
- __le32 res[3];
-};
-
-struct xgmac_priv {
- struct xgmac_dma_desc *rx_chain;
- struct xgmac_dma_desc *tx_chain;
- char *rxbuffer;
-
- u32 tx_currdesc;
- u32 rx_currdesc;
-
- void __iomem *base;
-
- struct eth_device edev;
- struct device_d *dev;
-};
-
-/* XGMAC Descriptor Access Helpers */
-static inline void desc_set_buf_len(struct xgmac_dma_desc *p, u32 buf_sz)
-{
- if (buf_sz > MAX_DESC_BUF_SZ)
- p->buf_size = cpu_to_le32(MAX_DESC_BUF_SZ |
- (buf_sz - MAX_DESC_BUF_SZ) << DESC_BUFFER2_SZ_OFFSET);
- else
- p->buf_size = cpu_to_le32(buf_sz);
-}
-
-static inline int desc_get_buf_len(struct xgmac_dma_desc *p)
-{
- u32 len = le32_to_cpu(p->buf_size);
- return (len & DESC_BUFFER1_SZ_MASK) +
- ((len & DESC_BUFFER2_SZ_MASK) >> DESC_BUFFER2_SZ_OFFSET);
-}
-
-static inline void desc_init_rx_desc(struct xgmac_dma_desc *p, int ring_size,
- int buf_sz)
-{
- struct xgmac_dma_desc *end = p + ring_size - 1;
-
- memset(p, 0, sizeof(*p) * ring_size);
-
- for (; p <= end; p++)
- desc_set_buf_len(p, buf_sz);
-
- end->buf_size |= cpu_to_le32(RXDESC1_END_RING);
-}
-
-static inline void desc_init_tx_desc(struct xgmac_dma_desc *p, u32 ring_size)
-{
- memset(p, 0, sizeof(*p) * ring_size);
- p[ring_size - 1].flags = cpu_to_le32(TXDESC_END_RING);
-}
-
-static inline int desc_get_owner(struct xgmac_dma_desc *p)
-{
- return le32_to_cpu(p->flags) & DESC_OWN;
-}
-
-static inline void desc_set_rx_owner(struct xgmac_dma_desc *p)
-{
- /* Clear all fields and set the owner */
- p->flags = cpu_to_le32(DESC_OWN);
-}
-
-static inline void desc_set_tx_owner(struct xgmac_dma_desc *p, u32 flags)
-{
- u32 tmpflags = le32_to_cpu(p->flags);
- tmpflags &= TXDESC_END_RING;
- tmpflags |= flags | DESC_OWN;
- p->flags = cpu_to_le32(tmpflags);
-}
-
-static inline void *desc_get_buf_addr(struct xgmac_dma_desc *p)
-{
- return (void *)le32_to_cpu(p->buf1_addr);
-}
-
-static inline void desc_set_buf_addr(struct xgmac_dma_desc *p,
- void *paddr, int len)
-{
- p->buf1_addr = cpu_to_le32(paddr);
- if (len > MAX_DESC_BUF_SZ)
- p->buf2_addr = cpu_to_le32(paddr + MAX_DESC_BUF_SZ);
-}
-
-static inline void desc_set_buf_addr_and_size(struct xgmac_dma_desc *p,
- void *paddr, int len)
-{
- desc_set_buf_len(p, len);
- desc_set_buf_addr(p, paddr, len);
-}
-
-static inline int desc_get_rx_frame_len(struct xgmac_dma_desc *p)
-{
- u32 data = le32_to_cpu(p->flags);
- u32 len = (data & RXDESC_FRAME_LEN_MASK) >> RXDESC_FRAME_LEN_OFFSET;
- if (data & RXDESC_FRAME_TYPE)
- len -= 4;
-
- return len;
-}
-
-/*
- * Initialize a descriptor ring. Calxeda XGMAC is configured to use
- * advanced descriptors.
- */
-
-static void init_rx_desc(struct xgmac_priv *priv)
-{
- struct xgmac_dma_desc *rxdesc = priv->rx_chain;
- void *rxbuffer = priv->rxbuffer;
- int i;
-
- desc_init_rx_desc(rxdesc, RX_NUM_DESC, ETH_BUF_SZ);
- writel((ulong)rxdesc, priv->base + XGMAC_DMA_RX_BASE_ADDR);
-
- for (i = 0; i < RX_NUM_DESC; i++) {
- desc_set_buf_addr(rxdesc + i, rxbuffer + (i * ETH_BUF_SZ),
- ETH_BUF_SZ);
- desc_set_rx_owner(rxdesc + i);
- }
-}
-
-static void init_tx_desc(struct xgmac_priv *priv)
-{
- desc_init_tx_desc(priv->tx_chain, TX_NUM_DESC);
- writel((ulong)priv->tx_chain, priv->base + XGMAC_DMA_TX_BASE_ADDR);
-}
-
-static int xgmac_reset(struct eth_device *dev)
-{
- struct xgmac_priv *priv = dev->priv;
- int ret;
- u32 value;
-
- value = readl(priv->base + XGMAC_CONTROL) & XGMAC_CONTROL_SPD_MASK;
-
- writel(DMA_BUS_MODE_SFT_RESET, priv->base + XGMAC_DMA_BUS_MODE);
-
- ret = wait_on_timeout(100 * MSECOND,
- !(readl(priv->base + XGMAC_DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET));
-
- writel(value, priv->base + XGMAC_CONTROL);
-
- return ret;
-}
-
-static int xgmac_open(struct eth_device *edev)
-{
- struct xgmac_priv *priv = edev->priv;
- int value;
- int ret;
-
- ret = xgmac_reset(edev);
- if (ret)
- return ret;
-
- /* set the AXI bus modes */
- value = DMA_BUS_MODE_ATDS |
- (16 << DMA_BUS_MODE_PBL_SHIFT) |
- DMA_BUS_MODE_FB | DMA_BUS_MODE_AAL;
- writel(value, priv->base + XGMAC_DMA_BUS_MODE);
-
- value = DMA_AXIMODE_AAL | DMA_AXIMODE_BLEN16 |
- DMA_AXIMODE_BLEN8 | DMA_AXIMODE_BLEN4;
- writel(value, priv->base + XGMAC_DMA_AXI_BUS);
-
- /* set flow control parameters and store and forward mode */
- value = (FIFO_MINUS_12K << XGMAC_OMR_RFD_SHIFT) |
- (FIFO_MINUS_4K << XGMAC_OMR_RFA_SHIFT) |
- XGMAC_OMR_EFC | XGMAC_OMR_TSF | XGMAC_OMR_RSF;
- writel(value, priv->base + XGMAC_OMR);
-
- /* enable pause frames */
- value = (1024 << XGMAC_FLOW_CTRL_PT_SHIFT) |
- (1 << XGMAC_FLOW_CTRL_PLT_SHIFT) |
- XGMAC_FLOW_CTRL_UP | XGMAC_FLOW_CTRL_RFE | XGMAC_FLOW_CTRL_TFE;
- writel(value, priv->base + XGMAC_FLOW_CTRL);
-
- /* Initialize the descriptor chains */
- init_rx_desc(priv);
- init_tx_desc(priv);
-
- /* must set to 0, or when started up will cause issues */
- priv->tx_currdesc = 0;
- priv->rx_currdesc = 0;
-
- /* set default core values */
- value = readl(priv->base + XGMAC_CONTROL);
- value &= XGMAC_CONTROL_SPD_MASK;
- value |= XGMAC_CONTROL_DDIC | XGMAC_CONTROL_ACS |
- XGMAC_CONTROL_IPC | XGMAC_CONTROL_CAR;
-
- /* Everything is ready enable both mac and DMA */
- value |= XGMAC_CONTROL_RE | XGMAC_CONTROL_TE;
- writel(value, priv->base + XGMAC_CONTROL);
-
- value = readl(priv->base + XGMAC_DMA_CONTROL);
- value |= DMA_CONTROL_SR | DMA_CONTROL_ST;
- writel(value, priv->base + XGMAC_DMA_CONTROL);
-
- return 0;
-}
-
-static int xgmac_send(struct eth_device *edev, void *packet, int length)
-{
- struct xgmac_priv *priv = edev->priv;
- u32 currdesc = priv->tx_currdesc;
- struct xgmac_dma_desc *txdesc = &priv->tx_chain[currdesc];
- int ret;
-
- dma_sync_single_for_device((unsigned long)packet, length, DMA_TO_DEVICE);
- desc_set_buf_addr_and_size(txdesc, packet, length);
- desc_set_tx_owner(txdesc, TXDESC_FIRST_SEG |
- TXDESC_LAST_SEG | TXDESC_CRC_EN_APPEND);
-
- /* write poll demand */
- writel(1, priv->base + XGMAC_DMA_TX_POLL);
-
- ret = wait_on_timeout(1 * SECOND, !desc_get_owner(txdesc));
- dma_sync_single_for_cpu((unsigned long)packet, length, DMA_TO_DEVICE);
- if (ret) {
- dev_err(priv->dev, "TX timeout\n");
- return ret;
- }
-
- priv->tx_currdesc = (currdesc + 1) & (TX_NUM_DESC - 1);
- return 0;
-}
-
-static int xgmac_recv(struct eth_device *edev)
-{
- struct xgmac_priv *priv = edev->priv;
- u32 currdesc = priv->rx_currdesc;
- struct xgmac_dma_desc *rxdesc = &priv->rx_chain[currdesc];
- int length = 0;
- void *buf_addr;
-
- /* check if the host has the desc */
- if (desc_get_owner(rxdesc))
- return -1; /* something bad happened */
-
- length = desc_get_rx_frame_len(rxdesc);
- buf_addr = desc_get_buf_addr(rxdesc);
-
- dma_sync_single_for_cpu((unsigned long)buf_addr, length, DMA_FROM_DEVICE);
- net_receive(edev, buf_addr, length);
- dma_sync_single_for_device((unsigned long)buf_addr, length,
- DMA_FROM_DEVICE);
-
- /* set descriptor back to owned by XGMAC */
- desc_set_rx_owner(rxdesc);
- writel(1, priv->base + XGMAC_DMA_RX_POLL);
-
- priv->rx_currdesc = (currdesc + 1) & (RX_NUM_DESC - 1);
-
- return length;
-}
-
-static void xgmac_halt(struct eth_device *edev)
-{
- struct xgmac_priv *priv = edev->priv;
- int value;
-
- /* Disable TX/RX */
- value = readl(priv->base + XGMAC_CONTROL);
- value &= ~(XGMAC_CONTROL_RE | XGMAC_CONTROL_TE);
- writel(value, priv->base + XGMAC_CONTROL);
-
- /* Disable DMA */
- value = readl(priv->base + XGMAC_DMA_CONTROL);
- value &= ~(DMA_CONTROL_SR | DMA_CONTROL_ST);
- writel(value, priv->base + XGMAC_DMA_CONTROL);
-
- /* must set to 0, or when started up will cause issues */
- priv->tx_currdesc = 0;
- priv->rx_currdesc = 0;
-}
-
-static int xgmac_get_ethaddr(struct eth_device *edev, unsigned char *addr)
-{
- struct xgmac_priv *priv = edev->priv;
- u32 hi_addr, lo_addr;
-
- /* Read the MAC address from the hardware */
- hi_addr = readl(priv->base + XGMAC_ADDR_HIGH(0));
- lo_addr = readl(priv->base + XGMAC_ADDR_LOW(0));
-
- /* Extract the MAC address from the high and low words */
- addr[0] = lo_addr & 0xff;
- addr[1] = (lo_addr >> 8) & 0xff;
- addr[2] = (lo_addr >> 16) & 0xff;
- addr[3] = (lo_addr >> 24) & 0xff;
- addr[4] = hi_addr & 0xff;
- addr[5] = (hi_addr >> 8) & 0xff;
-
- return 0;
-}
-
-static int xgmac_set_ethaddr(struct eth_device *dev, const unsigned char *addr)
-{
- struct xgmac_priv *priv = dev->priv;
- u32 data;
-
- data = (addr[5] << 8) | addr[4];
- writel(data, priv->base + XGMAC_ADDR_HIGH(0));
- data = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0];
- writel(data, priv->base + XGMAC_ADDR_LOW(0));
-
- return 0;
-}
-
-static int hb_xgmac_probe(struct device_d *dev)
-{
- struct resource *iores;
- struct eth_device *edev;
- struct xgmac_priv *priv;
- void __iomem *base;
-
- iores = dev_request_mem_resource(dev, 0);
- if (IS_ERR(iores))
- return PTR_ERR(iores);
- base = IOMEM(iores->start);
-
- /* check hardware version */
- if (readl(base + XGMAC_VERSION) != 0x1012)
- return -EINVAL;
-
- priv = xzalloc(sizeof(*priv));
-
- priv->dev = dev;
- priv->base = base;
-
- priv->rxbuffer = dma_alloc_coherent(RX_BUF_SZ, DMA_ADDRESS_BROKEN);
- priv->rx_chain = dma_alloc_coherent(RX_NUM_DESC * sizeof(struct xgmac_dma_desc),
- DMA_ADDRESS_BROKEN);
- priv->tx_chain = dma_alloc_coherent(TX_NUM_DESC * sizeof(struct xgmac_dma_desc),
- DMA_ADDRESS_BROKEN);
-
- edev = &priv->edev;
- edev->priv = priv;
-
- edev->open = xgmac_open;
- edev->send = xgmac_send;
- edev->recv = xgmac_recv;
- edev->halt = xgmac_halt;
- edev->get_ethaddr = xgmac_get_ethaddr;
- edev->set_ethaddr = xgmac_set_ethaddr;
- edev->parent = dev;
-
- eth_register(edev);
-
- return 0;
-}
-
-static __maybe_unused struct of_device_id xgmac_dt_ids[] = {
- {
- .compatible = "calxeda,hb-xgmac",
- }, {
- /* sentinel */
- }
-};
-
-static struct driver_d hb_xgmac_driver = {
- .name = "hb-xgmac",
- .probe = hb_xgmac_probe,
- .of_compatible = DRV_OF_COMPAT(xgmac_dt_ids),
-};
-device_platform_driver(hb_xgmac_driver);
--
2.30.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2021-08-12 12:22 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-12 12:19 Ahmad Fatoum [this message]
2021-08-12 12:19 ` [PATCH 2/5] net: make ARC MAC driver 32-bit only Ahmad Fatoum
2021-08-12 12:19 ` [PATCH 3/5] asm-generic: include bitio.h from io.h Ahmad Fatoum
2021-08-12 12:19 ` [PATCH 4/5] x86: define phys_to_virt and virt_to_phys Ahmad Fatoum
2021-08-12 12:19 ` [PATCH 5/5] net: e1000: split EEPROM and barebox MTD wrapper into separate files Ahmad Fatoum
2021-08-12 13:03 ` [PATCH 1/5] net: drop Calxeda Highbank xgmac driver support Ahmad Fatoum
2021-08-18 4:46 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210812121944.4419-1-a.fatoum@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox