mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Ahmad Fatoum <>
Cc: Ahmad Fatoum <>
Subject: [PATCH master] RISC-V: board-dt-2nd: move low level init into nonnaked function
Date: Thu, 16 Sep 2021 11:35:14 +0200
Message-ID: <> (raw)

The generic DT image for RISC-V mimics a kernel image and specifies
a load offset that it expects to be honoured. The stack should then
grow down from the load address. This didn't work as intended though
with riscv64-linux-gnu-gcc (Debian 10.2.1-6), because of the entry
point's __naked attribute: local variables overwrote the first bytes
of the entry point. Fix this by using a noinline nonnaked function.

Signed-off-by: Ahmad Fatoum <>
 arch/riscv/boot/board-dt-2nd.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/riscv/boot/board-dt-2nd.c b/arch/riscv/boot/board-dt-2nd.c
index f31c48a906c2..8b78e1b11d31 100644
--- a/arch/riscv/boot/board-dt-2nd.c
+++ b/arch/riscv/boot/board-dt-2nd.c
@@ -40,7 +40,8 @@ static const struct fdt_device_id console_ids[] = {
 	{ /* sentinel */ }
-ENTRY_FUNCTION(start_dt_2nd, hartid, _fdt, a2)
+static void noinline __noreturn start_dt_2nd_nonnaked(unsigned long hartid,
+						      unsigned long _fdt)
 	unsigned long membase, memsize, endmem, endfdt, uncompressed_len;
 	struct fdt_header *fdt = (void *)_fdt;
@@ -75,3 +76,8 @@ ENTRY_FUNCTION(start_dt_2nd, hartid, _fdt, a2)
 	barebox_riscv_supervisor_entry(membase, memsize, hartid, fdt);
+ENTRY_FUNCTION(start_dt_2nd, hartid, _fdt, a2)
+	start_dt_2nd_nonnaked(hartid, _fdt);

barebox mailing list

             reply	other threads:[~2021-09-16  9:36 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-16  9:35 Ahmad Fatoum [this message]
2021-10-02  9:19 ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

mail archive of the barebox mailing list

This inbox may be cloned and mirrored by anyone:

	git clone --mirror barebox/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 barebox barebox/ \
	public-inbox-index barebox

Example config snippet for mirrors.

AGPL code for this site: git clone