From: Sascha Hauer <sha@pengutronix.de>
To: "Ulrich Ölmann" <u.oelmann@pengutronix.de>
Cc: Barebox List <barebox@lists.infradead.org>
Subject: Re: [PATCH 1/2] common: Kconfig: fix typos
Date: Tue, 12 Oct 2021 10:44:30 +0200 [thread overview]
Message-ID: <20211012084430.GP28453@pengutronix.de> (raw)
In-Reply-To: <20211012083920.14092-1-u.oelmann@pengutronix.de>
On Tue, Oct 12, 2021 at 10:39:19AM +0200, Ulrich Ölmann wrote:
> Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
> ---
> common/Kconfig | 26 +++++++++++++-------------
> 1 file changed, 13 insertions(+), 13 deletions(-)
Applied, thanks
Sascha
>
> diff --git a/common/Kconfig b/common/Kconfig
> index 4239ddfb19e0..d8d20917aab6 100644
> --- a/common/Kconfig
> +++ b/common/Kconfig
> @@ -10,7 +10,7 @@ config HAS_MODULES
> config HAS_CACHE
> bool
> help
> - This allows you do run "make ARCH=sandbox allyesconfig".
> + This allows you to run "make ARCH=sandbox allyesconfig".
>
> Drivers that depend on a cache implementation can depend on this
> config, so that you don't get a compilation error.
> @@ -18,7 +18,7 @@ config HAS_CACHE
> config HAS_DMA
> bool
> help
> - This allows you do run "make ARCH=sandbox allyesconfig".
> + This allows you to run "make ARCH=sandbox allyesconfig".
>
> Drivers that depend on a DMA implementation can depend on this
> config, so that you don't get a compilation error.
> @@ -630,7 +630,7 @@ config BOOTM_FITIMAGE
> select FITIMAGE
> depends on BOOTM && ARM
> help
> - Support using Flattened Image Tree (FIT) Images. FIT is an image
> + Support using Flattened Image Tree (FIT) images. FIT is an image
> format introduced by U-Boot. A FIT image contains one or multiple
> kernels, device trees and initrds. The FIT image itself is a flattened
> device tree binary. Have a look at the u-boot source tree
> @@ -711,7 +711,7 @@ config MMCBLKDEV_ROOTARG
> variable is set or the used blspec entry contains 'linux-appendroot'.
>
> Note: It is crucial that the kernel device tree and the barebox device
> - tree uses the same mmc aliases.
> + tree use the same mmc aliases.
>
> [1] fa2d0aa96941 ("mmc: core: Allow setting slot index via device tree
> alias")
> @@ -968,7 +968,7 @@ config DEFAULT_ENVIRONMENT_GENERIC_NEW_IKCONFIG
> depends on DEFAULT_ENVIRONMENT_GENERIC_NEW
> help
> This option embeds the used barebox Kconfig .config file into the
> - environment as /env/data/config. This will increases barebox image
> + environment as /env/data/config. This will increase barebox' image
> size. If unsure, say n here.
>
> config DEFAULT_ENVIRONMENT_PATH
> @@ -1010,7 +1010,7 @@ config STATE_CRYPTO
> select DIGEST
> select DIGEST_HMAC_GENERIC
> help
> - This options enables HMAC based authentication support for
> + This option enables HMAC based authentication support for
> the state's header and data. This means the state framework
> can verify both the data integrity and the authentication of
> the state's header and data.
> @@ -1084,8 +1084,8 @@ config EXTERNAL_DTS_FRAGMENTS
> the dtc include search path.
>
> A preprocessor macro based on the name of the main dts will be
> - defined, which allows the dts fragments to based on which image of a
> - multi image build they are being used in. Given the dts filename
> + defined, which allows the dts fragments to be based on which image of
> + a multi image build they are being used in. Given the dts filename
> used for a board is "foo-board.dts" the external dts usage can be
> limited to that board with
>
> @@ -1093,9 +1093,9 @@ config EXTERNAL_DTS_FRAGMENTS
> ...
> #endif
>
> - It not intended that this be put into into Barebox defconfig files.
> - Instead, it's an external build system, like Yocto or buildroot, to
> - add dts fragments from outside the Barebox source tree into the
> + It is not intended that this is put into Barebox' defconfig files.
> + Instead, it's an external build system's job, like Yocto or buildroot,
> + to add dts fragments from outside the Barebox source tree into the
> Barebox build.
>
> menu "OP-TEE loading"
> @@ -1127,7 +1127,7 @@ config PBL_OPTEE
> depends on !THUMB2_BAREBOX
> help
> Allows starting OP-TEE during lowlevel initialization of the PBL.
> - Requires explicit support in the boards lowlevel file.
> + Requires explicit support in the board's lowlevel file.
>
> endmenu
>
> @@ -1510,7 +1510,7 @@ config PBL_BREAK
> bool "Execute software break on pbl start"
> depends on ARM && (!CPU_32v4T && !ARCH_TEGRA)
> help
> - If this enabled, barebox will be compiled with BKPT instruction
> + If enabled, barebox will be compiled with BKPT instruction
> on early pbl init. This option should be used only with JTAG debugger!
>
> source "lib/Kconfig.ubsan"
> --
> 2.30.2
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2021-10-12 8:46 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-12 8:39 Ulrich Ölmann
2021-10-12 8:39 ` [PATCH 2/2] common: Kconfig: fix indentation Ulrich Ölmann
2021-10-12 8:44 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211012084430.GP28453@pengutronix.de \
--to=sha@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=u.oelmann@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox