From: Oleksij Rempel <o.rempel@pengutronix.de> To: barebox@lists.infradead.org Cc: Oleksij Rempel <o.rempel@pengutronix.de> Subject: [PATCH v1] nvmem: bsec.c: add optional permanent write support Date: Mon, 29 Nov 2021 11:52:44 +0100 [thread overview] Message-ID: <20211129105244.3032203-1-o.rempel@pengutronix.de> (raw) To be able to fuze MAC address we need to be able to use BSEC_SMC_PROG_OTP instead of BSEC_SMC_WRITE_SHADOW. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- drivers/nvmem/Kconfig | 11 +++++++++++ drivers/nvmem/bsec.c | 22 +++++++++++++++++++--- 2 files changed, 30 insertions(+), 3 deletions(-) diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig index d809fb6eab..1bb477a997 100644 --- a/drivers/nvmem/Kconfig +++ b/drivers/nvmem/Kconfig @@ -66,6 +66,17 @@ config STM32_BSEC This adds support for the STM32 OTP controller. Reads and writes to will go to the shadow RAM, not the OTP fuses themselvers. +config STM32_BSEC_WRITE + bool + prompt "Enable write support of STM32 CPUs OTP fuses" + depends on STM32_BSEC + help + This adds write support to STM32 On-Chip OTP registers. Example of set + MAC to 12:34:56:78:9A:BC: + bsec0.permanent_write_enable=1 + mw -l -d /dev/stm32-bsec 0x000000e4+4 0x78563412 + mw -l -d /dev/stm32-bsec 0x000000e8+4 0x0000bc9a + config STARFIVE_OTP tristate "Starfive OTP Supprot" depends on SOC_STARFIVE diff --git a/drivers/nvmem/bsec.c b/drivers/nvmem/bsec.c index 2d35d12df3..86b943a45d 100644 --- a/drivers/nvmem/bsec.c +++ b/drivers/nvmem/bsec.c @@ -21,8 +21,10 @@ #define BSEC_OTP_SERIAL 13 struct bsec_priv { + struct device_d dev; u32 svc_id; struct regmap_config map_config; + int permanent_write_enable; }; struct stm32_bsec_data { @@ -59,13 +61,18 @@ static int stm32_bsec_read_shadow(void *ctx, unsigned reg, unsigned *val) return bsec_smc(ctx, BSEC_SMC_READ_SHADOW, reg, 0, val); } -static int stm32_bsec_reg_write_shadow(void *ctx, unsigned reg, unsigned val) +static int stm32_bsec_reg_write(void *ctx, unsigned reg, unsigned val) { - return bsec_smc(ctx, BSEC_SMC_WRITE_SHADOW, reg, val, NULL); + struct bsec_priv *priv = ctx; + + if (priv->permanent_write_enable) + return bsec_smc(ctx, BSEC_SMC_PROG_OTP, reg, val, NULL); + else + return bsec_smc(ctx, BSEC_SMC_WRITE_SHADOW, reg, val, NULL); } static struct regmap_bus stm32_bsec_regmap_bus = { - .reg_write = stm32_bsec_reg_write_shadow, + .reg_write = stm32_bsec_reg_write, .reg_read = stm32_bsec_read_shadow, }; @@ -150,6 +157,10 @@ static int stm32_bsec_probe(struct device_d *dev) priv->svc_id = data->svc_id; + dev_set_name(&priv->dev, "bsec"); + priv->dev.parent = dev; + register_device(&priv->dev); + priv->map_config.reg_bits = 32; priv->map_config.val_bits = 32; priv->map_config.reg_stride = 4; @@ -159,6 +170,11 @@ static int stm32_bsec_probe(struct device_d *dev) if (IS_ERR(map)) return PTR_ERR(map); + if (IS_ENABLED(CONFIG_STM32_BSEC_WRITE)) { + dev_add_param_bool(&priv->dev, "permanent_write_enable", + NULL, NULL, &priv->permanent_write_enable, NULL); + } + nvmem = nvmem_regmap_register(map, "stm32-bsec"); if (IS_ERR(nvmem)) return PTR_ERR(nvmem); -- 2.30.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2021-11-29 10:55 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-11-29 10:52 Oleksij Rempel [this message] 2021-11-29 11:07 ` Ahmad Fatoum 2021-11-29 11:10 ` [PATCH] fixup! " Ahmad Fatoum 2021-11-30 10:16 ` [PATCH v1] " Sascha Hauer
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20211129105244.3032203-1-o.rempel@pengutronix.de \ --to=o.rempel@pengutronix.de \ --cc=barebox@lists.infradead.org \ --subject='Re: [PATCH v1] nvmem: bsec.c: add optional permanent write support' \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox