From: Jules Maselbas <jmaselbas@kalray.eu>
To: barebox@lists.infradead.org
Cc: Clement Leger <clement.leger@bootlin.com>,
Louis Morhet <lmorhet@kalray.eu>, Luc Michel <lmichel@kalray.eu>,
Yann Sionneau <ysionneau@kalray.eu>,
Jules Maselbas <jmaselbas@kalray.eu>
Subject: [PATCH 00/13] kvx arch update
Date: Fri, 14 Jan 2022 17:51:59 +0100 [thread overview]
Message-ID: <20220114165208.9980-1-jmaselbas@kalray.eu> (raw)
This series has updates for the KVX architecture, with some fixes and
with the addition of kvx specific drivers for the otp-nvmem and socinfo.
With this series it is now possible to run barebox on qemu, however
our qemu port isn't upstreamed yet, it can still be compiled. To do
so you will need to check this git repo [1] and follow the build
instructions.
To compile barebox for the KVX architecture there is a pre-built
toolchain that can be downloaded here [2]
The following commands should build an run barebox on qemu:
$ PATH=<path/to/gcc-kalray-kvx-v4.7.0-cd2>/bin:$PATH ARCH=kvx make generic_defconfig all
$ qemu-system-kvx -m 1G -kernel barebox
[1] https://github.com/kalray/qemu-builder
[2] https://github.com/kalray/build-scripts/releases/tag/v4.7.0-cd2
---
Clement Leger (6):
common: elf: add elf_load_binary
kvx: enable FITIMAGE support
nvmem: add kvx otp non volatile regbank support
kvx: add kvx_sfr_field_val
drivers: add soc hierarchy properly
soc: add kvx_socinfo driver
Jules Maselbas (6):
kvx: dma: Remove arch dma_map/unmap_single
kvx: Move LINUX_BOOT_PARAM_MAGIC in asm/common.h
kvx: Accept LINUX_BOOT_PARAM_MAGIC as a valid magic value
clocksource: kvx: Register as postcore_platform_driver
kvx: Update defconfig
kvx: dts: Update k200.dts
Louis Morhet (1):
watchdog: kvx: do not disable watchdog on probe
arch/kvx/Kconfig | 1 +
arch/kvx/configs/generic_defconfig | 32 +++
arch/kvx/cpu/cpu.c | 2 +-
arch/kvx/dts/k200.dts | 426 +++++++++++++++++++++++++++--
arch/kvx/include/asm/bootm.h | 11 -
arch/kvx/include/asm/common.h | 3 +-
arch/kvx/include/asm/sfr.h | 4 +
arch/kvx/lib/bootm.c | 33 ++-
arch/kvx/lib/dma-default.c | 38 ---
common/elf.c | 83 ++++--
drivers/Kconfig | 2 +-
drivers/clocksource/kvx_timer.c | 2 +-
drivers/nvmem/Kconfig | 7 +
drivers/nvmem/Makefile | 3 +
drivers/nvmem/kvx-otp-nv.c | 99 +++++++
drivers/soc/Kconfig | 6 +
drivers/soc/Makefile | 1 +
drivers/soc/kvx/Kconfig | 10 +
drivers/soc/kvx/Makefile | 1 +
drivers/soc/kvx/kvx_socinfo.c | 141 ++++++++++
drivers/watchdog/kvx_wdt.c | 4 +-
include/elf.h | 1 +
22 files changed, 814 insertions(+), 96 deletions(-)
delete mode 100644 arch/kvx/include/asm/bootm.h
create mode 100644 drivers/nvmem/kvx-otp-nv.c
create mode 100644 drivers/soc/Kconfig
create mode 100644 drivers/soc/kvx/Kconfig
create mode 100644 drivers/soc/kvx/Makefile
create mode 100644 drivers/soc/kvx/kvx_socinfo.c
--
2.17.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2022-01-14 16:54 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-14 16:51 Jules Maselbas [this message]
2022-01-14 16:52 ` [PATCH 01/13] kvx: dma: Remove arch dma_map/unmap_single Jules Maselbas
2022-01-14 16:52 ` [PATCH 02/13] kvx: Move LINUX_BOOT_PARAM_MAGIC in asm/common.h Jules Maselbas
2022-01-14 16:52 ` [PATCH 03/13] kvx: Accept LINUX_BOOT_PARAM_MAGIC as a valid magic value Jules Maselbas
2022-01-14 16:52 ` [PATCH 04/13] common: elf: add elf_load_binary Jules Maselbas
2022-01-14 17:21 ` Clément Léger
2022-01-14 17:24 ` Jules Maselbas
2022-01-14 16:52 ` [PATCH 05/13] kvx: enable FITIMAGE support Jules Maselbas
2022-01-14 16:52 ` [PATCH 06/13] clocksource: kvx: Register as postcore_platform_driver Jules Maselbas
2022-01-14 16:52 ` [PATCH 07/13] watchdog: kvx: do not disable watchdog on probe Jules Maselbas
2022-01-14 16:52 ` [PATCH 08/13] nvmem: add kvx otp non volatile regbank support Jules Maselbas
2022-01-17 8:24 ` Sascha Hauer
2022-01-17 11:17 ` Jules Maselbas
2022-01-14 16:52 ` [PATCH 09/13] kvx: add kvx_sfr_field_val Jules Maselbas
2022-01-14 16:54 ` [PATCH 10/13] drivers: add soc hierarchy properly Jules Maselbas
2022-01-14 16:54 ` [PATCH 11/13] soc: add kvx_socinfo driver Jules Maselbas
2022-01-14 16:54 ` [PATCH 12/13] kvx: Update defconfig Jules Maselbas
2022-01-14 16:54 ` [PATCH 13/13] kvx: dts: Update k200.dts Jules Maselbas
2022-01-14 17:31 ` Clément Léger
2022-01-14 17:06 ` [PATCH 10/13] drivers: add soc hierarchy properly Ahmad Fatoum
2022-01-14 17:11 ` Jules Maselbas
2022-01-14 17:20 ` Ahmad Fatoum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220114165208.9980-1-jmaselbas@kalray.eu \
--to=jmaselbas@kalray.eu \
--cc=barebox@lists.infradead.org \
--cc=clement.leger@bootlin.com \
--cc=lmichel@kalray.eu \
--cc=lmorhet@kalray.eu \
--cc=ysionneau@kalray.eu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox