mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Oleksij Rempel <o.rempel@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Subject: [PATCH v3 1/6] ARM: rpi: convert board code to a driver
Date: Thu,  3 Feb 2022 11:45:47 +0100	[thread overview]
Message-ID: <20220203104552.3158202-2-o.rempel@pengutronix.de> (raw)
In-Reply-To: <20220203104552.3158202-1-o.rempel@pengutronix.de>

Convert board code to a driver model. This will prevent executing this
part of code on any other BCM2xxx based boards.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/boards/raspberry-pi/rpi-common.c | 33 +++++++++++++++++++++--
 1 file changed, 31 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boards/raspberry-pi/rpi-common.c b/arch/arm/boards/raspberry-pi/rpi-common.c
index 2684bd5ed7..247d12467a 100644
--- a/arch/arm/boards/raspberry-pi/rpi-common.c
+++ b/arch/arm/boards/raspberry-pi/rpi-common.c
@@ -511,7 +511,7 @@ static void rpi_vc_fdt(void)
 	}
 }
 
-static int rpi_devices_init(void)
+static int rpi_devices_probe(struct device_d *dev)
 {
 	struct regulator *reg;
 
@@ -529,4 +529,33 @@ static int rpi_devices_init(void)
 
 	return 0;
 }
-late_initcall(rpi_devices_init);
+
+static const struct of_device_id rpi_of_match[] = {
+	/* BCM2835 based Boards */
+	{ .compatible = "raspberrypi,model-a" },
+	{ .compatible = "raspberrypi,model-a-plus" },
+	{ .compatible = "raspberrypi,model-b" },
+	/* Raspberry Pi Model B (no P5) */
+	{ .compatible = "raspberrypi,model-b-i2c0" },
+	{ .compatible = "raspberrypi,model-b-rev2" },
+	{ .compatible = "raspberrypi,model-b-plus" },
+	{ .compatible = "raspberrypi,compute-module" },
+	{ .compatible = "raspberrypi,model-zero" },
+	{ .compatible = "raspberrypi,model-zero-w" },
+
+	/* BCM2836 based Boards */
+	{ .compatible = "raspberrypi,2-model-b" },
+
+	/* BCM2837 based Boards */
+	{ .compatible = "raspberrypi,3-model-a-plus" },
+	{ .compatible = "raspberrypi,3-model-b" },
+	{ .compatible = "raspberrypi,3-model-b-plus" },
+	{ /* sentinel */ },
+};
+
+static struct driver_d rpi_board_driver = {
+	.name = "board-rpi",
+	.probe = rpi_devices_probe,
+	.of_compatible = DRV_OF_COMPAT(rpi_of_match),
+};
+late_platform_driver(rpi_board_driver);
-- 
2.30.2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


  reply	other threads:[~2022-02-03 10:49 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-03 10:45 [PATCH v3 0/6] refactore rpi board code Oleksij Rempel
2022-02-03 10:45 ` Oleksij Rempel [this message]
2022-02-03 10:45 ` [PATCH v3 2/6] ARM: bcm2835 mbox: drop driver mode and probe on first request Oleksij Rempel
2022-02-03 10:45 ` [PATCH v3 3/6] ARM: rpi: move clk support to a separate driver Oleksij Rempel
2022-02-03 10:45 ` [PATCH v3 4/6] ARM: rpi: validate devicetree compatible instead of changing model name Oleksij Rempel
2022-02-03 10:45 ` [PATCH v3 5/6] ARM: rpi: set host name based on DT compatible Oleksij Rempel
2022-02-03 10:45 ` [PATCH v3 6/6] ARM: rpi: enable deep-probe support Oleksij Rempel
2022-02-03 12:37   ` Ahmad Fatoum
2022-02-07  8:05 ` [PATCH v3 0/6] refactore rpi board code Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220203104552.3158202-2-o.rempel@pengutronix.de \
    --to=o.rempel@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox