mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <sha@pengutronix.de>
To: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: barebox@lists.infradead.org, ejo@pengutronix.de
Subject: Re: [PATCH] ARM: stm32: add support for PHYTEC phyCORE stm32mp1
Date: Wed, 23 Feb 2022 13:06:37 +0100	[thread overview]
Message-ID: <20220223120637.GQ9136@pengutronix.de> (raw)
In-Reply-To: <20220223111036.3011774-1-a.fatoum@pengutronix.de>

On Wed, Feb 23, 2022 at 12:10:36PM +0100, Ahmad Fatoum wrote:
> From: Steffen Trumtrar <s.trumtrar@pengutronix.de>
> 
> Import DT[1] and add the boilerplate to have barebox generate a SSBL
> for the board.
> 
> [1]: git://git.phytec.de/tf-a-stm32mp
> 
> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> ---
>  arch/arm/boards/Makefile                      |   1 +
>  .../boards/phytec-phycore-stm32mp1/Makefile   |   3 +
>  .../boards/phytec-phycore-stm32mp1/board.c    |  28 ++
>  .../boards/phytec-phycore-stm32mp1/lowlevel.c |  19 +
>  arch/arm/dts/Makefile                         |   1 +
>  .../dts/stm32mp157c-phycore-stm32mp1-3.dts    |  58 +++
>  ...stm32mp157c-phycore-stm32mp15-pinctrl.dtsi |  92 +++++
>  .../stm32mp157c-phycore-stm32mp15-som.dtsi    | 337 ++++++++++++++++++
>  arch/arm/mach-stm32mp/Kconfig                 |   7 +
>  images/Makefile.stm32mp                       |   2 +
>  10 files changed, 548 insertions(+)
>  create mode 100644 arch/arm/boards/phytec-phycore-stm32mp1/Makefile
>  create mode 100644 arch/arm/boards/phytec-phycore-stm32mp1/board.c
>  create mode 100644 arch/arm/boards/phytec-phycore-stm32mp1/lowlevel.c
>  create mode 100644 arch/arm/dts/stm32mp157c-phycore-stm32mp1-3.dts
>  create mode 100644 arch/arm/dts/stm32mp157c-phycore-stm32mp15-pinctrl.dtsi
>  create mode 100644 arch/arm/dts/stm32mp157c-phycore-stm32mp15-som.dtsi
> 
> diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
> index 8557e1dca8c6..75e15cbda4df 100644
> --- a/arch/arm/boards/Makefile
> +++ b/arch/arm/boards/Makefile
> @@ -101,6 +101,7 @@ obj-$(CONFIG_MACH_PCM049)			+= phytec-phycore-omap4460/
>  obj-$(CONFIG_MACH_PHYTEC_SOM_AM335X)		+= phytec-som-am335x/
>  obj-$(CONFIG_MACH_PHYTEC_SOM_IMX6)		+= phytec-som-imx6/
>  obj-$(CONFIG_MACH_PHYTEC_PHYCORE_IMX7)		+= phytec-phycore-imx7/
> +obj-$(CONFIG_MACH_PHYTEC_PHYCORE_STM32MP1)	+= phytec-phycore-stm32mp1/
>  obj-$(CONFIG_MACH_PHYTEC_SOM_IMX8MQ)		+= phytec-som-imx8mq/
>  obj-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_AX3)	+= plathome-openblocks-ax3/
>  obj-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_A6)	+= plathome-openblocks-a6/
> diff --git a/arch/arm/boards/phytec-phycore-stm32mp1/Makefile b/arch/arm/boards/phytec-phycore-stm32mp1/Makefile
> new file mode 100644
> index 000000000000..1d052d28c9fc
> --- /dev/null
> +++ b/arch/arm/boards/phytec-phycore-stm32mp1/Makefile
> @@ -0,0 +1,3 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +lwl-y += lowlevel.o
> +obj-y += board.o
> diff --git a/arch/arm/boards/phytec-phycore-stm32mp1/board.c b/arch/arm/boards/phytec-phycore-stm32mp1/board.c
> new file mode 100644
> index 000000000000..eb6147785ff0
> --- /dev/null
> +++ b/arch/arm/boards/phytec-phycore-stm32mp1/board.c
> @@ -0,0 +1,28 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +#include <common.h>
> +#include <driver.h>
> +#include <bootsource.h>
> +
> +static int phycore_stm32mp1_probe(struct device_d *dev)
> +{
> +	if (bootsource_get_instance() == 0)
> +		of_device_enable_path("/chosen/environment-sd");
> +	else
> +		of_device_enable_path("/chosen/environment-emmc");
> +
> +	barebox_set_hostname("phyCORE-STM32MP1");
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id phycore_stm32mp1_of_match[] = {
> +	{ .compatible = "phytec,phycore-stm32mp1-3" },
> +	{ /* sentinel */ },
> +};
> +
> +static struct driver_d phycore_stm32mp1_board_driver = {
> +	.name = "board-phycore-stm32mp1",
> +	.probe = phycore_stm32mp1_probe,
> +	.of_compatible = phycore_stm32mp1_of_match,
> +};
> +device_platform_driver(phycore_stm32mp1_board_driver);
> diff --git a/arch/arm/boards/phytec-phycore-stm32mp1/lowlevel.c b/arch/arm/boards/phytec-phycore-stm32mp1/lowlevel.c
> new file mode 100644
> index 000000000000..f76bad86a10a
> --- /dev/null
> +++ b/arch/arm/boards/phytec-phycore-stm32mp1/lowlevel.c
> @@ -0,0 +1,19 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +#include <common.h>
> +#include <mach/entry.h>
> +#include <debug_ll.h>
> +
> +extern char __dtb_z_stm32mp157c_phycore_stm32mp1_3_start[];
> +
> +ENTRY_FUNCTION(start_phycore_stm32mp1_3, r0, r1, r2)
> +{
> +	void *fdt;
> +
> +	stm32mp_cpu_lowlevel_init();
> +
> +	putc_ll('>');
> +
> +	fdt = __dtb_z_stm32mp157c_phycore_stm32mp1_3_start + get_runtime_offset();
> +
> +	stm32mp1_barebox_entry(fdt);
> +}
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index e0bb66580f38..925ac12aa52a 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -75,6 +75,7 @@ lwl-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += imx6q-phytec-phycard.dtb.o \
>  				imx6ull-phytec-phycore-som-nand.dtb.o \
>  				imx6ull-phytec-phycore-som-emmc.dtb.o
>  lwl-$(CONFIG_MACH_PHYTEC_PHYCORE_IMX7) += imx7d-phyboard-zeta.dtb.o
> +lwl-$(CONFIG_MACH_PHYTEC_PHYCORE_STM32MP1) += stm32mp157c-phycore-stm32mp1-3.dtb.o
>  lwl-$(CONFIG_MACH_PHYTEC_SOM_IMX8MQ) += imx8mq-phytec-phycore-som.dtb.o
>  lwl-$(CONFIG_MACH_PINE64_QUARTZ64) += rk3566-quartz64-a.dtb.o
>  lwl-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_AX3) += armada-xp-openblocks-ax3-4-bb.dtb.o
> diff --git a/arch/arm/dts/stm32mp157c-phycore-stm32mp1-3.dts b/arch/arm/dts/stm32mp157c-phycore-stm32mp1-3.dts
> new file mode 100644
> index 000000000000..351067c9f110
> --- /dev/null
> +++ b/arch/arm/dts/stm32mp157c-phycore-stm32mp1-3.dts
> @@ -0,0 +1,58 @@
> +#include <arm/stm32mp15-pinctrl.dtsi>
> +#include <arm/stm32mp15xxac-pinctrl.dtsi>
> +#include "stm32mp151.dtsi"
> +#include "stm32mp157c-phycore-stm32mp15-som.dtsi"
> +
> +/ {
> +	model = "PHYTEC phyCORE-STM32MP1-3 SOM";
> +	compatible = "phytec,phycore-stm32mp1-3", "st,stm32mp157";
> +
> +	chosen {
> +		environment-sd {
> +			compatible = "barebox,environment";
> +			device-path = &sdmmc1, "partname:barebox-environment";
> +			status = "disabled";
> +		};
> +
> +		environment-emmc {
> +			compatible = "barebox,environment";
> +			device-path = &sdmmc2, "partname:barebox-environment";

I don't see any partition description for sdmmc1/2. Does the environment
work?

> +&i2c4 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c4_pins_a>;
> +	i2c-scl-rising-time-ns = <185>;
> +	i2c-scl-falling-time-ns = <20>;
> +	status = "okay";
> +	/delete-property/dmas;
> +	/delete-property/dma-names;
> +
> +	pmic: stpmic@33 {
> +		compatible = "st,stpmic1";
> +		reg = <0x33>;
> +		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +		status = "okay";

Could be dropped.

> +&qspi {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>;
> +	reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;

Why is the reg property overwritten?

> +	#address-cells = <1>;
> +	#size-cells = <0>;

This is already in the SoC dtsi.

> +	status = "disabled";

Is this needed? Isn't the qpsi controller disabled in the SoC dtsi
anyway? There are several more nodes in this files that are explicitly
disabled.

> +
> +	flash0: n25q128@0 {
> +		compatible = "micron,n25q128a13", "jedec,spi-nor";
> +		reg = <0>;
> +		spi-rx-bus-width = <4>;
> +		spi-max-frequency = <50000000>;
> +		m25p,fast-read;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +	};
> +};
> +
> +&sdmmc1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&sdmmc1_b4_pins_a>;
> +	disable-wp;
> +	st,neg-edge;
> +	bus-width = <4>;
> +	max-frequency = <10000000>;

This is very low. Is this intended?

> +	vmmc-supply = <&v3v3>;
> +	status = "disabled";
> +};
> +
> +&sdmmc2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
> +	non-removable;
> +	no-sd;
> +	no-sdio;
> +	st,neg-edge;
> +	bus-width = <8>;
> +	vmmc-supply = <&v3v3>;
> +	vqmmc-supply = <&v3v3>;
> +	mmc-ddr-3_3v;
> +	status = "disabled";
> +};
> +
> +&sram {
> +	dma_pool: dma_pool@0 {
> +		reg = <0x50000 0x10000>;

Should probably be dma_pool@50000

Sascha


-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


  reply	other threads:[~2022-02-23 12:54 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-23 11:10 Ahmad Fatoum
2022-02-23 12:06 ` Sascha Hauer [this message]
2022-02-23 12:18   ` Ahmad Fatoum

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220223120637.GQ9136@pengutronix.de \
    --to=sha@pengutronix.de \
    --cc=a.fatoum@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=ejo@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox