From: Joacim Zetterling <joacim.zetterling@westermo.com>
To: barebox@lists.infradead.org
Cc: a.fatoum@pengutronix.de
Subject: [PATCH] ARM: arch: dts: qspi: Add QSPI support to the NXP IMX8MN-EVK board
Date: Mon, 28 Feb 2022 18:03:28 +0100 [thread overview]
Message-ID: <20220228170328.248391-1-joacim.zetterling@westermo.com> (raw)
Add QSPI support in the default config and DTS files for the
NXP IMX8MN-EVK board. To be able to use it You also need the
QSPI driver enabled.
Tested on the NXP IMX8MN-EVK board as well as on an IMX8MN
custom bord supporting a QSPI flash. Tested with the memory
dump command i.e. 'md -s /dev/m25p0'.
Signed-off-by: Joacim Zetterling <joacim.zetterling@westermo.com>
---
arch/arm/configs/imx_v8_defconfig | 1 +
arch/arm/dts/imx8mn-evk.dts | 32 +++++++++++++++++++++++++++++++
2 files changed, 33 insertions(+)
diff --git a/arch/arm/configs/imx_v8_defconfig b/arch/arm/configs/imx_v8_defconfig
index b28c868a99bf..fe6398cc873d 100644
--- a/arch/arm/configs/imx_v8_defconfig
+++ b/arch/arm/configs/imx_v8_defconfig
@@ -99,6 +99,7 @@ CONFIG_NET_USB=y
CONFIG_NET_USB_ASIX=y
CONFIG_NET_USB_SMSC95XX=y
CONFIG_DRIVER_SPI_IMX=y
+CONFIG_SPI_NXP_FLEXSPI=y
CONFIG_I2C=y
CONFIG_I2C_IMX=y
CONFIG_MTD=y
diff --git a/arch/arm/dts/imx8mn-evk.dts b/arch/arm/dts/imx8mn-evk.dts
index 9fe24b3184f1..3d418f894283 100644
--- a/arch/arm/dts/imx8mn-evk.dts
+++ b/arch/arm/dts/imx8mn-evk.dts
@@ -60,3 +60,35 @@
&ocotp {
barebox,provide-mac-address = <&fec1 0x640>;
};
+
+&iomuxc {
+ pinctrl-names = "default";
+
+ pinctrl_flexspi0: flexspi0grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x1c4
+ MX8MN_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x84
+ MX8MN_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x84
+ MX8MN_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x84
+ MX8MN_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x84
+ MX8MN_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x84
+ >;
+ };
+};
+
+&flexspi {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexspi0>;
+
+ system_flash: mt25ql01g@0 {
+ reg = <0>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <80000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
--
2.25.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2022-02-28 17:05 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-28 17:03 Joacim Zetterling [this message]
2022-02-28 17:11 ` Ahmad Fatoum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220228170328.248391-1-joacim.zetterling@westermo.com \
--to=joacim.zetterling@westermo.com \
--cc=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox