From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [PATCH v2 20/21] doc: bcm283x: reference newer firmware
Date: Thu, 9 Jun 2022 07:59:21 +0200 [thread overview]
Message-ID: <20220609055922.667016-21-a.fatoum@pengutronix.de> (raw)
In-Reply-To: <20220609055922.667016-1-a.fatoum@pengutronix.de>
The old firmware can boot a Raspberry Pi 4 apparently, but it doesn't
contain bcm2711 device trees, so it's probably not an actually supported
configuration. Point at a newer firmware instead.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
Documentation/boards/bcm2835.rst | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/boards/bcm2835.rst b/Documentation/boards/bcm2835.rst
index 2fa5d445d21d..f6df3e9e8064 100644
--- a/Documentation/boards/bcm2835.rst
+++ b/Documentation/boards/bcm2835.rst
@@ -11,7 +11,7 @@ used in the Raspberry Pi 4, only basic support is currently available
1. Prepare an SD or microSD card with a FAT filesystem of at least 30 MB in size.
- 2. Download the `Raspberry Pi firmware`_ (120 MB), unzip it, and copy the
+ 2. Download the `Raspberry Pi firmware`_ (195 MB), unzip it, and copy the
contents of the ``boot/`` folder to your card.
3. Use ``make rpi_defconfig; make`` to build barebox. This will create the following images:
@@ -58,5 +58,5 @@ The original command-line from VideoCore device tree is available to the Barebox
global linux.bootargs.vc="$global.vc.bootargs"
-.. _Raspberry Pi firmware: https://codeload.github.com/raspberrypi/firmware/zip/80e1fbeb78f9df06701d28c0ed3a3060a3f557ef
+.. _Raspberry Pi firmware: https://github.com/raspberrypi/firmware/archive/refs/tags/1.20220331.zip
.. _documentation for config.txt: https://www.raspberrypi.org/documentation/configuration/config-txt/
--
2.30.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2022-06-09 6:01 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-09 5:59 [PATCH v2 00/21] ARM: rpi: add basic Raspberry Pi 4 support Ahmad Fatoum
2022-06-09 5:59 ` [PATCH v2 01/21] ARM64: asm: implement read_cpuid_id() Ahmad Fatoum
2022-06-09 5:59 ` [PATCH v2 02/21] dma: add dma_sync nop stubs for PBL Ahmad Fatoum
2022-06-14 8:49 ` Sascha Hauer
2022-06-14 9:00 ` Ahmad Fatoum
2022-06-09 5:59 ` [PATCH v2 03/21] ARM: rpi: move bcm2835_add_device_sdram() into header Ahmad Fatoum
2022-06-09 5:59 ` [PATCH v2 04/21] ARM: rpi: support PBL use of mbox Ahmad Fatoum
2022-06-09 5:59 ` [PATCH v2 05/21] ARM: rpi: split out mbox helpers to share code with PBL Ahmad Fatoum
2022-06-09 5:59 ` [PATCH v2 06/21] ARM: rpi: switch to ARM_USE_COMPRESSED_DTB Ahmad Fatoum
2022-06-09 5:59 ` [PATCH v2 07/21] ARM: rpi: add generic Raspberry Pi image Ahmad Fatoum
2022-06-09 5:59 ` [PATCH v2 08/21] ARM: rpi: support FDT in x0 for 64bit configurations Ahmad Fatoum
2022-06-09 5:59 ` [PATCH v2 09/21] serial: ns16550: rpi: remove ungating now done by proper clk driver Ahmad Fatoum
2022-06-09 5:59 ` [PATCH v2 10/21] ARM: cpu: prevent recursive dependencies via CPU_SUPPORTS_64BIT_KERNEL Ahmad Fatoum
2022-06-09 5:59 ` [PATCH v2 11/21] ARM: cpu: remove unnecessary CONFIG_SYS_SUPPORTS_64BIT_KERNEL Ahmad Fatoum
2022-06-09 5:59 ` [PATCH v2 12/21] ARM: cpu: remove unused SYS_SUPPORTS_32BIT_KERNEL Ahmad Fatoum
2022-06-09 5:59 ` [PATCH v2 13/21] ARM: rpi: add Raspberry Pi 3 64-bit build support Ahmad Fatoum
2022-06-09 5:59 ` [PATCH v2 14/21] ARM: rpi: rpi3: disallow MMU_EARLY && 64BIT Ahmad Fatoum
2022-06-09 5:59 ` [PATCH v2 15/21] clk: rpi: add Raspberry Pi 4 support Ahmad Fatoum
2022-06-09 13:58 ` Sascha Hauer
2022-06-09 14:15 ` Ahmad Fatoum
2022-06-09 5:59 ` [PATCH v2 16/21] mci: bcm2835: add bcm2711-emmc2 (Rpi4) support Ahmad Fatoum
2022-06-09 5:59 ` [PATCH v2 17/21] clocksource: bcm2835: bump below architeced timer for AArch64 Ahmad Fatoum
2022-06-09 5:59 ` [PATCH v2 18/21] ARM: rpi: add Raspberry Pi 4 support Ahmad Fatoum
2022-06-09 5:59 ` [PATCH v2 19/21] ARM: rpi: add debug_ll support for Raspberry Pi 4 Ahmad Fatoum
2022-06-09 5:59 ` Ahmad Fatoum [this message]
2022-06-09 5:59 ` [PATCH v2 21/21] ARM: rpi: use correct kernel8.img as name for 64-bit Ahmad Fatoum
2022-06-10 8:33 ` [PATCH v2 00/21] ARM: rpi: add basic Raspberry Pi 4 support Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220609055922.667016-21-a.fatoum@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox