mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Antony Pavlov <antonynpavlov@gmail.com>
To: barebox@lists.infradead.org
Subject: [PATCH] net: rtl8169: make it work on big-endian system
Date: Thu, 16 Jun 2022 12:03:51 +0300	[thread overview]
Message-ID: <20220616090351.645589-1-antonynpavlov@gmail.com> (raw)

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
 drivers/net/rtl8169.c | 34 +++++++++++++++++-----------------
 1 file changed, 17 insertions(+), 17 deletions(-)

diff --git a/drivers/net/rtl8169.c b/drivers/net/rtl8169.c
index 80997dc89f4..341f5f240e4 100644
--- a/drivers/net/rtl8169.c
+++ b/drivers/net/rtl8169.c
@@ -230,13 +230,13 @@ static void rtl8169_init_ring(struct rtl8169_priv *priv)
 	for (i = 0; i < NUM_RX_DESC; i++) {
 		if (i == (NUM_RX_DESC - 1))
 			priv->rx_desc[i].status =
-				BD_STAT_OWN | BD_STAT_EOR | PKT_BUF_SIZE;
+				cpu_to_le32(BD_STAT_OWN | BD_STAT_EOR | PKT_BUF_SIZE);
 		else
 			priv->rx_desc[i].status =
-				BD_STAT_OWN | PKT_BUF_SIZE;
+				cpu_to_le32(BD_STAT_OWN | PKT_BUF_SIZE);
 
 		priv->rx_desc[i].buf_addr =
-				virt_to_phys(priv->rx_buf + i * PKT_BUF_SIZE);
+				cpu_to_le32(virt_to_phys(priv->rx_buf + i * PKT_BUF_SIZE));
 	}
 }
 
@@ -358,21 +358,21 @@ static int rtl8169_eth_send(struct eth_device *edev, void *packet,
 
 	priv->tx_desc[entry].buf_Haddr = 0;
 	priv->tx_desc[entry].buf_addr =
-		virt_to_phys(priv->tx_buf + entry * PKT_BUF_SIZE);
+		cpu_to_le32(virt_to_phys(priv->tx_buf + entry * PKT_BUF_SIZE));
 
 	if (entry != (NUM_TX_DESC - 1)) {
 		priv->tx_desc[entry].status =
-			BD_STAT_OWN | BD_STAT_FS | BD_STAT_LS |
-			((packet_length > ETH_ZLEN) ? packet_length : ETH_ZLEN);
+			cpu_to_le32(BD_STAT_OWN | BD_STAT_FS | BD_STAT_LS |
+			((packet_length > ETH_ZLEN) ? packet_length : ETH_ZLEN));
 	} else {
 		priv->tx_desc[entry].status =
-			BD_STAT_OWN | BD_STAT_EOR | BD_STAT_FS | BD_STAT_LS |
-			((packet_length > ETH_ZLEN) ? packet_length : ETH_ZLEN);
+			cpu_to_le32(BD_STAT_OWN | BD_STAT_EOR | BD_STAT_FS | BD_STAT_LS |
+			((packet_length > ETH_ZLEN) ? packet_length : ETH_ZLEN));
 	}
 
 	RTL_W8(priv, TxPoll, 0x40);
 
-	while (priv->tx_desc[entry].status & BD_STAT_OWN)
+	while (le32_to_cpu(priv->tx_desc[entry].status) & BD_STAT_OWN)
 		;
 
 	dma_sync_single_for_cpu((unsigned long)priv->tx_buf + entry *
@@ -391,9 +391,9 @@ static int rtl8169_eth_rx(struct eth_device *edev)
 
 	entry = priv->cur_rx % NUM_RX_DESC;
 
-	if ((priv->rx_desc[entry].status & BD_STAT_OWN) == 0) {
-		if (!(priv->rx_desc[entry].status & BD_STAT_RX_RES)) {
-			pkt_size = (priv->rx_desc[entry].status & 0x1fff) - 4;
+	if ((le32_to_cpu(priv->rx_desc[entry].status) & BD_STAT_OWN) == 0) {
+		if (!(le32_to_cpu(priv->rx_desc[entry].status) & BD_STAT_RX_RES)) {
+			pkt_size = (le32_to_cpu(priv->rx_desc[entry].status) & 0x1fff) - 4;
 
 			dma_sync_single_for_cpu((unsigned long)priv->rx_buf
 						+ entry * PKT_BUF_SIZE,
@@ -407,14 +407,14 @@ static int rtl8169_eth_rx(struct eth_device *edev)
 						   pkt_size, DMA_FROM_DEVICE);
 
 			if (entry == NUM_RX_DESC - 1)
-				priv->rx_desc[entry].status = BD_STAT_OWN |
-					BD_STAT_EOR | PKT_BUF_SIZE;
+				priv->rx_desc[entry].status = cpu_to_le32(BD_STAT_OWN |
+					BD_STAT_EOR | PKT_BUF_SIZE);
 			else
 				priv->rx_desc[entry].status =
-					BD_STAT_OWN | PKT_BUF_SIZE;
+					cpu_to_le32(BD_STAT_OWN | PKT_BUF_SIZE);
 			priv->rx_desc[entry].buf_addr =
-				virt_to_phys(priv->rx_buf +
-				             entry * PKT_BUF_SIZE);
+				cpu_to_le32(virt_to_phys(priv->rx_buf +
+							 entry * PKT_BUF_SIZE));
 		} else {
 			dev_err(&edev->dev, "rx error\n");
 		}
-- 
2.36.1




             reply	other threads:[~2022-06-16  9:05 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-16  9:03 Antony Pavlov [this message]
2022-06-17  6:40 ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220616090351.645589-1-antonynpavlov@gmail.com \
    --to=antonynpavlov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox