mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <sha@pengutronix.de>
To: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH master] mci: bcm2835: reset host controller on barebox shutdown
Date: Tue, 4 Oct 2022 09:55:23 +0200	[thread overview]
Message-ID: <20221004075523.GI986@pengutronix.de> (raw)
In-Reply-To: <e6743279-3842-5595-66bc-4b2d793ab8ba@pengutronix.de>

On Fri, Sep 30, 2022 at 03:18:29PM +0100, Ahmad Fatoum wrote:
> On 30.09.22 13:24, Sascha Hauer wrote:
> > On Fri, Sep 30, 2022 at 01:19:40PM +0200, Ahmad Fatoum wrote:
> >> We don't usually disable MMC controllers on barebox shutdown, because
> >> they don't DMA on their own, unlike e.g. network controllers.
> >>
> >> Booting Linux v5.17.0 on a Raspberry Pi 4 in 32-bit mode still has the
> >> MMC host controller driver complain:
> >>
> >>   [   22.464887] mmc1: Got data interrupt 0x00000002 even though no
> >>   			data operation was in progress.
> >>
> >> Fix this by resetting the SDHCI once barebox is done with it.
> >>
> >> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> >> ---
> >>  drivers/mci/mci-bcm2835.c | 12 ++++++++++++
> >>  1 file changed, 12 insertions(+)
> > 
> > Applied, thanks
> 
> Please drop again. The warning is spurious and it just happened to not
> show up in my testing runs afterwards. I am looking into a proper fix
> and will let it do more reboot cycles to make sure issue is indeed
> resolved.

It's already pushed to master, I can't drop it. I could revert it.
Should I do that?

Sascha

> 
> > 
> > Sascha
> > 
> >>
> >> diff --git a/drivers/mci/mci-bcm2835.c b/drivers/mci/mci-bcm2835.c
> >> index f092156f9a83..c5b226ba033c 100644
> >> --- a/drivers/mci/mci-bcm2835.c
> >> +++ b/drivers/mci/mci-bcm2835.c
> >> @@ -385,6 +385,8 @@ static int bcm2835_mci_probe(struct device_d *hw_dev)
> >>  	host->sdhci.read32 = bcm2835_sdhci_read32;
> >>  	host->sdhci.write32 = bcm2835_sdhci_write32;
> >>  
> >> +	hw_dev->priv = host;
> >> +
> >>  	mci_of_parse(&host->mci);
> >>  
> >>  	iores = dev_request_mem_resource(hw_dev, 0);
> >> @@ -420,6 +422,15 @@ static int bcm2835_mci_probe(struct device_d *hw_dev)
> >>  	return mci_register(&host->mci);
> >>  }
> >>  
> >> +static void bcm2835_mci_remove(struct device_d *dev)
> >> +{
> >> +	struct bcm2835_mci_host *host = dev->priv;
> >> +
> >> +	sdhci_write32(&host->sdhci,
> >> +		      SDHCI_CLOCK_CONTROL__TIMEOUT_CONTROL__SOFTWARE_RESET,
> >> +		      0x00);
> >> +}
> >> +
> >>  static __maybe_unused struct of_device_id bcm2835_mci_compatible[] = {
> >>  	{
> >>  		.compatible = "brcm,bcm2835-sdhci",
> >> @@ -433,6 +444,7 @@ static __maybe_unused struct of_device_id bcm2835_mci_compatible[] = {
> >>  static struct driver_d bcm2835_mci_driver = {
> >>  	.name = "bcm2835_mci",
> >>  	.probe = bcm2835_mci_probe,
> >> +	.remove = bcm2835_mci_remove,
> >>  	.of_compatible = DRV_OF_COMPAT(bcm2835_mci_compatible),
> >>  };
> >>  
> >> -- 
> >> 2.30.2
> >>
> >>
> >>
> > 
> 
> 
> -- 
> Pengutronix e.K.                           |                             |
> Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
> 31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



      reply	other threads:[~2022-10-04  7:56 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-30 11:19 Ahmad Fatoum
2022-09-30 12:24 ` Sascha Hauer
2022-09-30 14:18   ` Ahmad Fatoum
2022-10-04  7:55     ` Sascha Hauer [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221004075523.GI986@pengutronix.de \
    --to=sha@pengutronix.de \
    --cc=a.fatoum@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox