From: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH] Documentation: boards: i.MX8MP-EVK: Fix two doc bugs
Date: Wed, 19 Oct 2022 15:51:40 +0200 [thread overview]
Message-ID: <20221019135140.79821-1-u.kleine-koenig@pengutronix.de> (raw)
The bl31 binary must be put in the firmware/ subdirectory to be properly
picked up. And building the full imx_v8_defconfig requires some more DDR
PHY firmware files, so disable all other machines.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
Documentation/boards/imx/nxp-imx8mp-evk.rst | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/Documentation/boards/imx/nxp-imx8mp-evk.rst b/Documentation/boards/imx/nxp-imx8mp-evk.rst
index 1074992f2f88..dcedf882c6d2 100644
--- a/Documentation/boards/imx/nxp-imx8mp-evk.rst
+++ b/Documentation/boards/imx/nxp-imx8mp-evk.rst
@@ -47,7 +47,7 @@ Get TF-A from https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/ and
checkout version v2.7::
make PLAT=imx8mp bl31
- cp build/imx8mp/release/bl31.bin ${barebox_srctree}/imx8mp-bl31.bin
+ cp build/imx8mp/release/bl31.bin ${barebox_srctree}/firmware/imx8mp-bl31.bin
.. warning:: It is important to use a version >= v2.7 else your system
might not boot.
@@ -58,6 +58,7 @@ Build Barebox
i.MX8MP-EVK support is contained in the imx_v8_defconfig to build it use::
make imx_v8_defconfig
+ make menuconfig # disable all machines under "System Type" but "NXP i.MX8MP EVK Board"
make
Boot Configuration
base-commit: 3e01858983aafb424b5ad10f11997af8cba99a5d
--
2.37.2
next reply other threads:[~2022-10-19 13:53 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-19 13:51 Uwe Kleine-König [this message]
2022-10-24 8:36 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221019135140.79821-1-u.kleine-koenig@pengutronix.de \
--to=u.kleine-koenig@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox