[PATCH] Documentation: i.MX8M: add EVK barebox installation documentation

[Ahmad Fatoum <a.fatoum@pengutronix.de>]

The barebox i.MX images have a preamble that pads the i.MX header to the
offset expected by the BootROM. This allows writing barebox images
directly to offset 0 on SD-Cards and eMMC user area. For some i.MX8M,
these images can't be directly written to eMMC boot partitions and
instead require special handling. Add a note about this to the
documentation.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
 Documentation/boards/imx/nxp-imx8mm-evk.rst | 18 ++++++++++++++++
 Documentation/boards/imx/nxp-imx8mn-evk.rst | 24 +++++++++++++++++++++
 Documentation/boards/imx/nxp-imx8mp-evk.rst | 24 +++++++++++++++++++++
 3 files changed, 66 insertions(+)

diff --git a/Documentation/boards/imx/nxp-imx8mm-evk.rst b/Documentation/boards/imx/nxp-imx8mm-evk.rst
index c3cd35ae38a2..7ed7459c08a6 100644
--- a/Documentation/boards/imx/nxp-imx8mm-evk.rst
+++ b/Documentation/boards/imx/nxp-imx8mm-evk.rst
@@ -69,3 +69,21 @@ board for serial download mode as printed on the PCB. You can start barebox with
 the imx-usb-loader tool that comes with barebox like this:
 
 ./scripts/imx/imx-usb-loader images/barebox-nxp-imx8mm-evk.img
+
+Installing barebox
+==================
+
+When the EVK is strapped to boot from eMMC, the i.MX8M bootrom will
+consult the eMMC ext_csd register to determine whether to boot
+from the active eMMC boot partition or from the user area.
+
+The same barebox image written to the start of the SD-Card can
+be written to the start of the eMMC user area. Power-fail installation
+to the eMMC boot partition requires special handling:
+
+  - The barebox image must be written to the inactive boot partition,
+    then afterwards, the newly written boot partition is activated
+    (This is controlled by the barebox ``mmcX.boot`` variable).
+
+The ``barebox_update`` command takes care of this and need just be
+supplied a barebox image as argument.
diff --git a/Documentation/boards/imx/nxp-imx8mn-evk.rst b/Documentation/boards/imx/nxp-imx8mn-evk.rst
index b920e22d33e9..4c07b949dafb 100644
--- a/Documentation/boards/imx/nxp-imx8mn-evk.rst
+++ b/Documentation/boards/imx/nxp-imx8mn-evk.rst
@@ -58,3 +58,27 @@ Build barebox
 
  make imx_v8_defconfig
  make
+
+Installing barebox
+==================
+
+When the EVK is strapped to boot from eMMC, the i.MX8M bootrom will
+consult the eMMC ext_csd register to determine whether to boot
+from the active eMMC boot partition or from the user area.
+
+The same barebox image written to the start of the SD-Card can
+be written to the start of the eMMC user area. Power-fail installation
+to the eMMC boot partition requires special handling:
+
+  - The barebox image must be written to the inactive boot partition,
+    then afterwards, the newly written boot partition is activated
+    (This is controlled by the barebox ``mmcX.boot`` variable).
+
+  - The barebox image includes a 32KiB preamble that allows the image
+    to be directly writable to the start of the SD-Card or eMMC user area.
+    Unlike older i.MX8M, the i.MX8MN BootROM expects the bootloader to not
+    start as an offset when booting from eMMC boot partitions, thus the first
+    32KiB must be stripped.
+
+The ``barebox_update`` command takes care of this and need just be
+supplied a barebox image as argument.
diff --git a/Documentation/boards/imx/nxp-imx8mp-evk.rst b/Documentation/boards/imx/nxp-imx8mp-evk.rst
index 1074992f2f88..60e9f9eaea5d 100644
--- a/Documentation/boards/imx/nxp-imx8mp-evk.rst
+++ b/Documentation/boards/imx/nxp-imx8mp-evk.rst
@@ -66,3 +66,27 @@ Boot Configuration
 The NXP i.MX8MP-EVK board has four switches responsible for configuring
 bootsource/boot mode. The settings for the different boot sources are
 printed on the board.
+
+Installing barebox
+==================
+
+When the EVK is strapped to boot from eMMC, the i.MX8M bootrom will
+consult the eMMC ext_csd register to determine whether to boot
+from the active eMMC boot partition or from the user area.
+
+The same barebox image written to the start of the SD-Card can
+be written to the start of the eMMC user area. Power-fail installation
+to the eMMC boot partition requires special handling:
+
+  - The barebox image must be written to the inactive boot partition,
+    then afterwards, the newly written boot partition is activated
+    (This is controlled by the barebox ``mmcX.boot`` variable).
+
+  - The barebox image includes a 32KiB preamble that allows the image
+    to be directly writable to the start of the SD-Card or eMMC user area.
+    Unlike older i.MX8M, the i.MX8MP BootROM expects the bootloader to not
+    start as an offset when booting from eMMC boot partitions, thus the first
+    32KiB must be stripped.
+
+The ``barebox_update`` command takes care of this and need just be
+supplied a barebox image as argument.
-- 
2.30.2