From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [PATCH 06/11] net: dsa: ksz9477: create regmap cdev for switch registers
Date: Wed, 11 Jan 2023 09:01:14 +0100 [thread overview]
Message-ID: <20230111080119.933475-7-a.fatoum@pengutronix.de> (raw)
In-Reply-To: <20230111080119.933475-1-a.fatoum@pengutronix.de>
Now that we use regmap for the KSZ9477 driver, we can make the register
map available for introspection as a device file. As the KSZ driver has
a separate regmap for each of the three access sizes, we add a new
regmap_multi_register_cdev abstraction that multiplexes device file
access to the regmap with the best matching alignment.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
drivers/base/regmap/Makefile | 1 +
drivers/base/regmap/regmap-multi.c | 81 ++++++++++++++++++++++++++++++
drivers/net/ksz9477.c | 6 ++-
include/regmap.h | 2 +
4 files changed, 89 insertions(+), 1 deletion(-)
create mode 100644 drivers/base/regmap/regmap-multi.c
diff --git a/drivers/base/regmap/Makefile b/drivers/base/regmap/Makefile
index d99db4277149..fe5beaaaa382 100644
--- a/drivers/base/regmap/Makefile
+++ b/drivers/base/regmap/Makefile
@@ -1,5 +1,6 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-y += regmap.o
+obj-y += regmap-multi.o
obj-y += regmap-mmio.o
obj-$(CONFIG_REGMAP_FORMATTED) += regmap-fmt.o
obj-$(CONFIG_I2C) += regmap-i2c.o
diff --git a/drivers/base/regmap/regmap-multi.c b/drivers/base/regmap/regmap-multi.c
new file mode 100644
index 000000000000..79dd1ba9bd95
--- /dev/null
+++ b/drivers/base/regmap/regmap-multi.c
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2022 Ahmad Fatoum <a.fatoum@pengutronix.de>
+ */
+
+#include <common.h>
+#include <regmap.h>
+#include <linux/export.h>
+
+#include "internal.h"
+
+enum { MULTI_MAP_8, MULTI_MAP_16, MULTI_MAP_32, MULTI_MAP_COUNT };
+struct regmap_multi {
+ struct cdev cdev;
+ struct regmap *map[MULTI_MAP_COUNT];
+};
+
+static struct regmap *regmap_multi_cdev_get_map(struct cdev *cdev, size_t count)
+{
+ struct regmap_multi *multi = container_of(cdev, struct regmap_multi, cdev);
+ struct regmap *map = NULL;
+
+ if (count % 4 == 0)
+ map = multi->map[MULTI_MAP_32];
+ if (!map && count % 2 == 0)
+ map = multi->map[MULTI_MAP_16];
+ return map ?: multi->map[MULTI_MAP_8];
+}
+
+static ssize_t regmap_multi_cdev_read(struct cdev *cdev, void *buf, size_t count,
+ loff_t offset, unsigned long flags)
+{
+ struct regmap *map = regmap_multi_cdev_get_map(cdev, count);
+
+ return regmap_bulk_read(map, offset, buf, count) ?: count;
+}
+
+static ssize_t regmap_multi_cdev_write(struct cdev *cdev, const void *buf, size_t count,
+ loff_t offset, unsigned long flags)
+{
+ struct regmap *map = regmap_multi_cdev_get_map(cdev, count);
+
+ return regmap_bulk_write(map, offset, buf, count) ?: count;
+}
+
+static struct cdev_operations regmap_multi_fops = {
+ .read = regmap_multi_cdev_read,
+ .write = regmap_multi_cdev_write,
+};
+
+int regmap_multi_register_cdev(struct regmap *maps[3])
+{
+ struct regmap_multi *multi;
+ struct cdev *cdev;
+ int i;
+
+ multi = xzalloc(sizeof(*multi));
+ cdev = &multi->cdev;
+
+ cdev->ops = ®map_multi_fops;
+ cdev->size = LLONG_MAX;
+
+ for (i = 0; i < MULTI_MAP_COUNT; i++) {
+ struct regmap *map = maps[i];
+ if (!map)
+ continue;
+
+ multi->map[i] = map;
+ cdev->size = min_t(loff_t, regmap_size_bytes(map), cdev->size);
+ cdev->dev = cdev->dev ?: map->dev;
+ }
+
+ if (!cdev->dev) {
+ free(multi);
+ return -EINVAL;
+ }
+
+ cdev->name = xstrdup(dev_name(cdev->dev));
+
+ return devfs_create(cdev);
+}
diff --git a/drivers/net/ksz9477.c b/drivers/net/ksz9477.c
index a980735e8e3a..93ce0dab813b 100644
--- a/drivers/net/ksz9477.c
+++ b/drivers/net/ksz9477.c
@@ -450,7 +450,11 @@ static int microchip_switch_probe(struct device *dev)
ksz_default_setup(priv);
- return dsa_register_switch(ds);
+ ret = dsa_register_switch(ds);
+ if (ret)
+ return ret;
+
+ return regmap_multi_register_cdev(priv->regmap);
}
static const struct of_device_id microchip_switch_dt_ids[] = {
diff --git a/include/regmap.h b/include/regmap.h
index 986ed391ab28..76e648a5d73f 100644
--- a/include/regmap.h
+++ b/include/regmap.h
@@ -175,6 +175,8 @@ struct device *regmap_get_device(struct regmap *map);
int regmap_register_cdev(struct regmap *map, const char *name);
+int regmap_multi_register_cdev(struct regmap *map[3]);
+
int regmap_write(struct regmap *map, unsigned int reg, unsigned int val);
int regmap_read(struct regmap *map, unsigned int reg, unsigned int *val);
--
2.30.2
next prev parent reply other threads:[~2023-01-11 8:04 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-11 8:01 [PATCH 00/11] net: dsa: ksz9477: use regmap to add I2C support next to SPI Ahmad Fatoum
2023-01-11 8:01 ` [PATCH 01/11] regmap: consolidate reg/val format into regmap_format Ahmad Fatoum
2023-01-11 8:01 ` [PATCH 02/11] regmap: support formatted read and write Ahmad Fatoum
2023-01-11 8:01 ` [PATCH 03/11] regmap: port regmap_init_spi Ahmad Fatoum
2023-01-11 8:01 ` [PATCH 04/11] regmap: factor out regmap cdev size calculation Ahmad Fatoum
2023-01-11 8:01 ` [PATCH 05/11] net: dsa: ksz9477: switch to regmap_init_spi Ahmad Fatoum
2023-01-11 8:01 ` Ahmad Fatoum [this message]
2023-01-11 8:56 ` [PATCH 06/11] net: dsa: ksz9477: create regmap cdev for switch registers Sascha Hauer
2023-01-11 9:33 ` Ahmad Fatoum
2023-01-11 8:01 ` [PATCH 07/11] drivers: base: regmap: introduce REGMAP_I2C Ahmad Fatoum
2023-01-11 8:01 ` [PATCH 08/11] dev: add dev_bus_is_spi/i2c helpers Ahmad Fatoum
2023-01-11 8:01 ` [PATCH 09/11] net: dsa: ksz9477: refactor to prepare i2c support Ahmad Fatoum
2023-01-11 8:01 ` [PATCH 10/11] regmap: i2c: use formatted I/O Ahmad Fatoum
2023-01-11 8:01 ` [PATCH 11/11] net: ksz9477: add I2C support Ahmad Fatoum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230111080119.933475-7-a.fatoum@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox