mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: John Watts <contact@jookia.org>
To: barebox@lists.infradead.org
Cc: John Watts <contact@jookia.org>
Subject: [PATCH 0/5] Add support for the Kosagi Novena board
Date: Mon, 23 Jan 2023 04:51:36 +1100	[thread overview]
Message-ID: <20230122175141.119834-1-contact@jookia.org> (raw)

This patch series introduces support for the Novena board.
This support is basic but enough to boot Barebox.

The last patch requires my previous patch series here:
https://lists.infradead.org/pipermail/barebox/2023-January/041270.html

John Watts (5):
  ARM: novena: Add Kosagi Novena board
  ARM: novena: Setup RAM using static configuration
  ARM: novena: Require the PFUZE regulator
  ARM: novena: Read Ethernet MAC address from EEPROM
  ARM: novena: Use DDR3 information from SPD EEPROM

 arch/arm/boards/Makefile                      |   1 +
 arch/arm/boards/novena/Makefile               |   4 +
 arch/arm/boards/novena/board.c                |  81 ++++++++
 arch/arm/boards/novena/ddr_regs.h             | 119 +++++++++++
 .../boards/novena/flash-header-novena.imxcfg  |   6 +
 arch/arm/boards/novena/lowlevel.c             | 195 ++++++++++++++++++
 arch/arm/configs/imx_v7_defconfig             |   1 +
 arch/arm/dts/Makefile                         |   1 +
 arch/arm/dts/imx6q-novena.dts                 |  19 ++
 arch/arm/mach-imx/Kconfig                     |   9 +
 images/Makefile.imx                           |   2 +
 11 files changed, 438 insertions(+)
 create mode 100644 arch/arm/boards/novena/Makefile
 create mode 100644 arch/arm/boards/novena/board.c
 create mode 100644 arch/arm/boards/novena/ddr_regs.h
 create mode 100644 arch/arm/boards/novena/flash-header-novena.imxcfg
 create mode 100644 arch/arm/boards/novena/lowlevel.c
 create mode 100644 arch/arm/dts/imx6q-novena.dts

-- 
2.39.0




             reply	other threads:[~2023-01-22 17:53 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-22 17:51 John Watts [this message]
2023-01-22 17:51 ` [PATCH 1/5] ARM: novena: Add " John Watts
2023-01-23  9:20   ` Sascha Hauer
2023-01-22 17:51 ` [PATCH 2/5] ARM: novena: Setup RAM using static configuration John Watts
2023-01-22 17:51 ` [PATCH 3/5] ARM: novena: Require the PFUZE regulator John Watts
2023-01-22 17:51 ` [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM John Watts
2023-01-23  9:33   ` Sascha Hauer
2023-01-23  9:55     ` John Watts
2023-01-24 18:35     ` John Watts
2023-01-25  8:04       ` Sascha Hauer
2023-01-25  8:11         ` John Watts
2023-01-25  8:19           ` Sascha Hauer
2023-01-25 13:31             ` John Watts
2023-01-25 13:48               ` Ahmad Fatoum
2023-01-25 14:04                 ` John Watts
2023-01-25 14:16                   ` Ahmad Fatoum
2023-01-25 14:28                     ` John Watts
2023-01-25 14:33                       ` Ahmad Fatoum
2023-01-25 14:50                         ` John Watts
2023-01-25 15:42               ` Sascha Hauer
2023-01-25 16:13                 ` John Watts
2023-01-22 17:51 ` [PATCH 5/5] ARM: novena: Use DDR3 information from SPD EEPROM John Watts
2023-01-22 23:20   ` John Watts
2023-01-25 16:42 ` [PATCH v2 0/4] Add support for the Kosagi Novena board John Watts
2023-01-25 16:42 ` [PATCH v2 1/4] ARM: novena: Add " John Watts
2023-01-25 19:33   ` Marco Felsch
2023-01-26  7:25     ` Sascha Hauer
2023-01-26  7:50     ` John Watts
2023-01-26  9:13       ` Marco Felsch
2023-01-25 16:42 ` [PATCH v2 2/4] ARM: novena: Setup RAM using static configuration John Watts
2023-01-25 19:39   ` Marco Felsch
2023-01-26  7:54     ` John Watts
2023-01-26  8:11       ` Sascha Hauer
2023-01-26  9:14         ` Marco Felsch
2023-01-25 16:42 ` [PATCH v2 3/4] ARM: novena: Read Ethernet MAC address from EEPROM John Watts
2023-01-25 20:07   ` Marco Felsch
2023-01-26  8:05     ` John Watts
2023-01-26  9:07       ` Marco Felsch
2023-01-25 16:42 ` [PATCH v2 4/4] ARM: novena: Use DDR3 information from SPD EEPROM John Watts
2023-01-29 23:27 ` [PATCH v3 0/4] Add support for the Kosagi Novena board John Watts
2023-01-29 23:27 ` [PATCH v3 1/4] ARM: novena: Add " John Watts
2023-01-30 20:13   ` Marco Felsch
2023-01-30 20:26     ` John Watts
2023-01-31  9:45       ` Marco Felsch
2023-01-29 23:27 ` [PATCH v3 2/4] ARM: novena: Setup RAM using static configuration John Watts
2023-01-29 23:27 ` [PATCH v3 3/4] ARM: novena: Read Ethernet MAC address from EEPROM John Watts
2023-01-30 20:04   ` Marco Felsch
2023-01-30 20:25     ` John Watts
2023-01-31  9:29       ` Marco Felsch
2023-01-29 23:28 ` [PATCH v3 4/4] ARM: novena: Use DDR3 information from SPD EEPROM John Watts
2023-01-30 20:18   ` Marco Felsch
2023-01-30 20:41     ` John Watts

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230122175141.119834-1-contact@jookia.org \
    --to=contact@jookia.org \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox