Re: [PATCH v2 1/2] ddr: imx8m: add support for 3720 MHz DDR rate

[Sascha Hauer <sha@pengutronix.de>]

On Wed, Feb 08, 2023 at 02:35:18PM +0100, Lucas Stach wrote:
> From: Ahmad Fatoum <a.fatoum@pengutronix.de>
> 
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> ---
>  drivers/ddr/imx8m/ddrphy_utils.c | 3 +++
>  1 file changed, 3 insertions(+)

Applied, thanks

Sascha

> 
> diff --git a/drivers/ddr/imx8m/ddrphy_utils.c b/drivers/ddr/imx8m/ddrphy_utils.c
> index 98e6ae648aed..7f863a1736c6 100644
> --- a/drivers/ddr/imx8m/ddrphy_utils.c
> +++ b/drivers/ddr/imx8m/ddrphy_utils.c
> @@ -17,6 +17,7 @@
>   * clock / 2, which is therefor transfer rate / 4.  */
>  enum ddr_rate {
>  	DDR_4000,
> +	DDR_3720,
>  	DDR_3200,
>  	DDR_3000,
>  	DDR_2600, /* Unused */
> @@ -52,6 +53,7 @@ static const struct imx8mm_fracpll_config {
>  	bool valid;
>  } imx8mm_fracpll_table[DDR_NUM_RATES] = {
>  	[DDR_4000] = { .valid = true, .r1 = MDIV(250) | PDIV(3) | SDIV(1), .r2 = 0 },
> +	[DDR_3720] = { .valid = true, .r1 = MDIV(310) | PDIV(2) | SDIV(2), .r2 = 0 },
>  	[DDR_3200] = { .valid = true, .r1 = MDIV(300) | PDIV(9) | SDIV(0), .r2 = 0 },
>  	[DDR_3000] = { .valid = true, .r1 = MDIV(250) | PDIV(8) | SDIV(0), .r2 = 0 },
>  	[DDR_2600] = { .valid = true, .r1 = MDIV(325) | PDIV(3) | SDIV(2), .r2 = 0 },
> @@ -335,6 +337,7 @@ void ddrphy_init_set_dfi_clk(unsigned int drate_mhz, enum ddrc_type type)
>  
>  	switch (drate_mhz) {
>  	case 4000: drate = DDR_4000; break;
> +	case 3720: drate = DDR_3720; break;
>  	case 3200: drate = DDR_3200; break;
>  	case 3000: drate = DDR_3000; break;
>  	case 2400: drate = DDR_2400; break;
> -- 
> 2.39.1
> 
> 
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |