From: Marco Felsch <m.felsch@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH v2 22/23] ARM: i.MX8M: add QSPI update handler
Date: Mon, 13 Mar 2023 14:42:01 +0100 [thread overview]
Message-ID: <20230228-v2023-02-0-topic-flexspi-v2-22-3d33126d2434@pengutronix.de> (raw)
In-Reply-To: <20230228-v2023-02-0-topic-flexspi-v2-0-3d33126d2434@pengutronix.de>
This adds the FlexSPI/QSPI update handler to be able to write the
common barebox image to the QSPI.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
---
arch/arm/boards/nxp-imx8mm-evk/board.c | 1 +
arch/arm/boards/nxp-imx8mn-evk/board.c | 1 +
arch/arm/boards/nxp-imx8mp-evk/board.c | 1 +
3 files changed, 3 insertions(+)
diff --git a/arch/arm/boards/nxp-imx8mm-evk/board.c b/arch/arm/boards/nxp-imx8mm-evk/board.c
index fd748262f7..c8e17570ca 100644
--- a/arch/arm/boards/nxp-imx8mm-evk/board.c
+++ b/arch/arm/boards/nxp-imx8mm-evk/board.c
@@ -53,6 +53,7 @@ static int imx8mm_evk_probe(struct device *dev)
imx8m_bbu_internal_mmc_register_handler("SD", "/dev/mmc1.barebox", sd_bbu_flag);
imx8m_bbu_internal_mmcboot_register_handler("eMMC", "/dev/mmc2", emmc_bbu_flag);
+ imx8m_bbu_internal_flexspi_nor_register_handler("QSPI", "/dev/m25p0.barebox", 0);
phy_register_fixup_for_uid(PHY_ID_AR8031, AR_PHY_ID_MASK,
ar8031_phy_fixup);
diff --git a/arch/arm/boards/nxp-imx8mn-evk/board.c b/arch/arm/boards/nxp-imx8mn-evk/board.c
index 13efc62a58..3e90ba284c 100644
--- a/arch/arm/boards/nxp-imx8mn-evk/board.c
+++ b/arch/arm/boards/nxp-imx8mn-evk/board.c
@@ -51,6 +51,7 @@ static int imx8mn_evk_probe(struct device *dev)
imx8m_bbu_internal_mmc_register_handler("SD", "/dev/mmc1.barebox", sd_bbu_flag);
imx8m_bbu_internal_mmcboot_register_handler("eMMC", "/dev/mmc2", emmc_bbu_flag);
+ imx8m_bbu_internal_flexspi_nor_register_handler("QSPI", "/dev/m25p0.barebox", 0);
phy_register_fixup_for_uid(PHY_ID_AR8031, AR_PHY_ID_MASK,
ar8031_phy_fixup);
diff --git a/arch/arm/boards/nxp-imx8mp-evk/board.c b/arch/arm/boards/nxp-imx8mp-evk/board.c
index 0c9fe7835b..2aa551e504 100644
--- a/arch/arm/boards/nxp-imx8mp-evk/board.c
+++ b/arch/arm/boards/nxp-imx8mp-evk/board.c
@@ -36,6 +36,7 @@ static int nxp_imx8mp_evk_probe(struct device *dev)
imx8m_bbu_internal_mmc_register_handler("SD", "/dev/mmc1.barebox", sd_bbu_flag);
imx8m_bbu_internal_mmcboot_register_handler("eMMC", "/dev/mmc2", emmc_bbu_flag);
+ imx8m_bbu_internal_flexspi_nor_register_handler("QSPI", "/dev/m25p0.barebox", 0);
/* Enable RGMII TX clk output */
val = readl(MX8MP_IOMUXC_GPR_BASE_ADDR + MX8MP_IOMUXC_GPR1);
--
2.30.2
next prev parent reply other threads:[~2023-03-13 13:46 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-13 13:41 [PATCH v2 00/23] FlexSPI image/boot/update support Marco Felsch
2023-03-13 13:41 ` [PATCH v2 01/23] spi: remove flash_platform_data support Marco Felsch
2023-03-13 13:41 ` [PATCH v2 02/23] bbu: make it possible to check multiple of-compatibles Marco Felsch
2023-04-04 7:04 ` Sascha Hauer
2023-04-04 8:01 ` Marco Felsch
2023-04-04 8:49 ` Sascha Hauer
2023-04-04 9:05 ` Marco Felsch
2023-03-13 13:41 ` [PATCH v2 03/23] ARM: i.MX8MM: add missing IMD_USED_OF image metadata entry Marco Felsch
2023-03-13 13:41 ` [PATCH v2 04/23] ARM: i.MX8MN: add missing IMD_USED_OF image metadata entries Marco Felsch
2023-03-13 13:41 ` [PATCH v2 05/23] mci: imx-esdhc-pbl: fix number of read blocks Marco Felsch
2023-03-13 13:41 ` [PATCH v2 06/23] mci: imx-esdhc-pbl: refactor the esdhc_load_image function Marco Felsch
2023-03-13 13:41 ` [PATCH v2 07/23] mci: imx-esdhc-pbl: move imx_load_image into common xload code Marco Felsch
2023-03-13 13:41 ` [PATCH v2 08/23] ARM: i.MX8M: Add QSPI image load support Marco Felsch
2023-03-13 13:41 ` [PATCH v2 09/23] ARM: i.MX bootsource: set QSPI instance Marco Felsch
2023-03-13 13:41 ` [PATCH v2 10/23] ARM: i.MX8MM bootsource: fix QSPI boot source detection Marco Felsch
2023-03-13 13:41 ` [PATCH v2 11/23] ARM: i.MX8M: Add QSPI boot support Marco Felsch
2023-03-13 13:41 ` [PATCH v2 12/23] scripts: imx-image: convert flag variables into bool Marco Felsch
2023-03-13 13:41 ` [PATCH v2 13/23] scripts: imx-image: header_v2: factor out offset parameter Marco Felsch
2023-03-13 13:41 ` [PATCH v2 14/23] scripts: imx-image: header_v2: add header_len parameter Marco Felsch
2023-03-13 13:41 ` [PATCH v2 15/23] scripts: imx-image: add FlexSPI image support Marco Felsch
2023-03-13 13:41 ` [PATCH v2 16/23] filetype: add NXP FlexSPI filetype Marco Felsch
2023-03-13 13:41 ` [PATCH v2 17/23] ARM: i.MX: bbu: rename IMX_INTERNAL_FLAG_ERASE to IMX_BBU_FLAG_ERASE Marco Felsch
2023-03-13 13:41 ` [PATCH v2 18/23] ARM: i.MX: bbu: add filetype offset Marco Felsch
2023-03-13 13:41 ` [PATCH v2 19/23] ARM: i.MX: bbu: add FlexSPI update handler Marco Felsch
2023-03-13 13:41 ` [PATCH v2 20/23] ARM: i.MX8M: enable FlexSPI image support Marco Felsch
2023-03-13 13:42 ` [PATCH v2 21/23] ARM: i.MX8M: add qspi barebox and barebox-environment partitions Marco Felsch
2023-03-13 13:42 ` Marco Felsch [this message]
2023-03-13 13:42 ` [PATCH v2 23/23] Documentation: i.MX8M: add EVK QSPI NOR barebox installation documentation Marco Felsch
2023-03-17 11:11 ` [PATCH v2 00/23] FlexSPI image/boot/update support Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230228-v2023-02-0-topic-flexspi-v2-22-3d33126d2434@pengutronix.de \
--to=m.felsch@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox