mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Marc Reilly <marc@cpdesign.com.au>
To: barebox@lists.infradead.org
Subject: [PATCH v2 1/3] commands: add pwm manipulation command
Date: Mon, 29 May 2023 10:13:16 +1000	[thread overview]
Message-ID: <20230529001318.12309-2-marc@cpdesign.com.au> (raw)
In-Reply-To: <20230529001318.12309-1-marc@cpdesign.com.au>

This introduces a command to set parameters for a pwm device.

Signed-off-by: Marc Reilly <marc@cpdesign.com.au>
---
 commands/Kconfig  |  11 ++++
 commands/Makefile |   1 +
 commands/pwm.c    | 143 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 155 insertions(+)
 create mode 100644 commands/pwm.c

diff --git a/commands/Kconfig b/commands/Kconfig
index 4d3ff631a8..cc7585bbb2 100644
--- a/commands/Kconfig
+++ b/commands/Kconfig
@@ -1929,6 +1929,17 @@ config CMD_I2C
 		  -w		use word (16 bit) wide access
 		  -v		verbose
 
+config CMD_PWM
+	bool
+	depends on PWM
+	prompt "PWM commands: pwm_set"
+	help
+	  pwm_set - set pwm state
+
+	  Usage: pwm_set [dDPfwis]
+
+	  Controls the pwm values such as period and duty cycle
+
 config CMD_LED
 	bool
 	depends on LED
diff --git a/commands/Makefile b/commands/Makefile
index 98625a0373..011ae59427 100644
--- a/commands/Makefile
+++ b/commands/Makefile
@@ -69,6 +69,7 @@ obj-$(CONFIG_CMD_GPIO)		+= gpio.o
 obj-$(CONFIG_CMD_UNCOMPRESS)	+= uncompress.o
 obj-$(CONFIG_CMD_I2C)		+= i2c.o
 obj-$(CONFIG_CMD_SPI)		+= spi.o
+obj-$(CONFIG_CMD_PWM)		+= pwm.o
 obj-$(CONFIG_CMD_MIPI_DBI)	+= mipi_dbi.o
 obj-$(CONFIG_CMD_UBI)		+= ubi.o
 obj-$(CONFIG_CMD_UBIFORMAT)	+= ubiformat.o
diff --git a/commands/pwm.c b/commands/pwm.c
new file mode 100644
index 0000000000..a21b918c89
--- /dev/null
+++ b/commands/pwm.c
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// SPDX-FileCopyrightText: © 2023 Marc Reilly <marc@cpdesign.com.au>
+
+/* pwm - pwm commands */
+
+#include <common.h>
+#include <command.h>
+#include <errno.h>
+#include <malloc.h>
+#include <getopt.h>
+#include <pwm.h>
+
+#define HZ_TO_NANOSECONDS(x) (1000000000UL/(x))
+
+static int do_pwm_set(int argc, char *argv[])
+{
+	struct pwm_device *pwm = NULL;
+	struct pwm_state state;
+	int error = 0;
+	char *devname = NULL;
+	int duty = -1, period = -1;
+	int freq = -1, width = -1;
+	int invert_polarity = -1, stop = -1;
+	int opt;
+
+	while ((opt = getopt(argc, argv, "d:D:P:f:w:is")) > 0) {
+		switch (opt) {
+		case 'd':
+			devname = optarg;
+			break;
+		case 'D':
+			duty = simple_strtol(optarg, NULL, 0);
+			break;
+		case 'P':
+			period = simple_strtol(optarg, NULL, 0);
+			break;
+		case 'f':
+			freq = simple_strtol(optarg, NULL, 0);
+			break;
+		case 'w':
+			width = simple_strtol(optarg, NULL, 0);
+			break;
+		case 'i':
+			invert_polarity = 1;
+			break;
+		case 's':
+			stop = 1;
+			break;
+		}
+	}
+
+	if (!devname) {
+		printf(" need to specify a device\n");
+		return COMMAND_ERROR_USAGE;
+	}
+	if ((freq == 0) || (period == 0)) {
+		printf(" period or freqency needs to be non-zero\n");
+		return COMMAND_ERROR_USAGE;
+	}
+	if (width > 100) {
+		printf(" width (%% duty cycle) can't be more than 100%%\n");
+		return COMMAND_ERROR_USAGE;
+	}
+
+	pwm = pwm_request(devname);
+	if (!pwm) {
+		printf(" pwm device %s not found\n", devname);
+		return -ENODEV;
+	}
+
+	pwm_get_state(pwm, &state);
+
+	if ((state.period_ns == 0)
+			&& (freq < 0) && (duty < 0) && (period < 0)) {
+		printf(" need to know some timing info; freq or dury/period\n");
+	    pwm_free(pwm);
+		return COMMAND_ERROR_USAGE;
+	}
+
+	if (invert_polarity >= 0)
+		state.polarity = invert_polarity;
+
+	/* period */
+	if (freq > 0) {
+		state.p_enable = true;
+		state.period_ns = HZ_TO_NANOSECONDS(freq);
+		if (width < 0) {
+			width = 50;
+		}
+	} else if (period > 0) {
+		state.p_enable = true;
+		state.period_ns = period;
+	}
+
+	/* duty */
+	if (width >= 0) {
+		pwm_set_relative_duty_cycle(&state, width, 100);
+	} else if (duty >= 0) {
+		if (duty > state.period_ns)
+			printf(" warning: duty_ns is greater than period\n");
+
+		state.duty_ns = duty;
+	}
+
+	error = pwm_apply_state(pwm, &state);
+
+	if (stop > 0) {
+		state.p_enable = false;
+		error = pwm_apply_state(pwm, &state);
+	}
+
+	pwm_free(pwm);
+
+	return error;
+}
+
+BAREBOX_CMD_HELP_START(pwm_set)
+BAREBOX_CMD_HELP_TEXT("Sets a pwm device parameters.")
+BAREBOX_CMD_HELP_TEXT(" Specify the device by device name")
+BAREBOX_CMD_HELP_TEXT(" Timings can either be specified via period + duty (on) duration,")
+BAREBOX_CMD_HELP_TEXT("  or via frequency. Duty can be given either as a percentage or time.")
+BAREBOX_CMD_HELP_TEXT(" If a parameter is not specified, the current value will be used")
+BAREBOX_CMD_HELP_TEXT("  where possible - except when setting frequency, in which case")
+BAREBOX_CMD_HELP_TEXT("  the 'width' will default to 50%.")
+BAREBOX_CMD_HELP_TEXT(" Stopping the device does not necessarily set the output to inactive.")
+BAREBOX_CMD_HELP_TEXT(" To set an output to inactive state, set the duty to 0.")
+BAREBOX_CMD_HELP_TEXT("Options:")
+BAREBOX_CMD_HELP_OPT("-d string", "device name (eg 'pwm0')")
+BAREBOX_CMD_HELP_OPT("-D number", "duty cycle (ns)")
+BAREBOX_CMD_HELP_OPT("-P number", "period (ns)")
+BAREBOX_CMD_HELP_OPT("-f number", "frequency (Hz)")
+BAREBOX_CMD_HELP_OPT("-w number", "duty cycle (%) - the on 'width' of each cycle")
+BAREBOX_CMD_HELP_OPT("-i\t", "line inverted polarity")
+BAREBOX_CMD_HELP_OPT("-s\t", "stop (disable) the pwm device")
+BAREBOX_CMD_HELP_END
+
+BAREBOX_CMD_START(pwm_set)
+	.cmd		= do_pwm_set,
+	BAREBOX_CMD_DESC("set pwm")
+	BAREBOX_CMD_OPTS("[-dDPfwis]")
+	BAREBOX_CMD_GROUP(CMD_GRP_HWMANIP)
+	BAREBOX_CMD_HELP(cmd_pwm_set_help)
+BAREBOX_CMD_END
-- 
2.35.3




  reply	other threads:[~2023-05-29  0:16 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-29  0:13 Adding PWM Commands Marc Reilly
2023-05-29  0:13 ` Marc Reilly [this message]
2023-05-29  9:23   ` [PATCH v2 1/3] commands: add pwm manipulation command Jules Maselbas
2023-05-29 11:03     ` marc
2023-05-29 12:18       ` Jules Maselbas
2023-05-29  0:13 ` [PATCH v2 2/3] commands: pwm: add pwm_get command Marc Reilly
2023-05-29  9:06   ` Jules Maselbas
2023-05-29  0:13 ` [PATCH v2 3/3] include: pwm: minor function doc fix for pwm_set_relative_duty_cycle() Marc Reilly

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230529001318.12309-2-marc@cpdesign.com.au \
    --to=marc@cpdesign.com.au \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox